HT1665 Bluetooth docking station speakers not working when docked

I have a new docking station a Pioneer XW-BTS3-K which is certified by apple to work with my iPhone 4. The remote control and buttons on the docking station all work fine when my iPhone is docked and the phone charges. But iTunes will not play through the docking station speakers although the speakers work when connected through bluetooth.
The Pioneer website is not very helpfull as it has no information on which ios software the station is compatible with.
Is there something wrong with my iPhone?

it's unclear what you mean when you say itunes
itunes on ios is the store bit and the play music part is called just music
itunes on computers is both
if you dock an ios device the dock would likely be prepared to play music from the docked device
and stop computers play to it using bluetooth

Similar Messages

  • The T61 internal mic does not work when docked

    The internal mic does not work when docked. However works fine when undocked.
    Does anyone know how to fix this?

    I go this issue very recently. What I did to solve the problem was probably mentioned before somwehre over the web.
    First of all, I degraded Skype from the latest version to skype 6.1.0.129. Then I went in Skype - Tools - Option - Advanced Settings - Automatic Updates and click "Turn off automatic updates" and Save. I closed (Quit Skype) Skype then.  
    I clicked on Start (in toolbar) and in search area typed Device Meneger. Then in Sound Video and game controlers, highlite and right click on mouse on IDT High Definition Audio Codec and press Unistall. This will unistall IDT drivers from the system. You must restart your computer.
    Once you come back after reboot, you must go again to the Sound Video and game controlers and remove the rest part of your driver. After reboot go Sound Video and game controlers and click "Scan for hardware changes" then system find your IDT Sound Card again. Please install the latest driver (6.10.6367.0) and reboot. After reboot you should have mic working while on Skype. 

  • Speakers Not Work When Diplay is in Upright Position - Lenovo G450

    I have a Lenovo G450. Recently the built-in speakers will not work when the display monitor is in open position. The speakers will work when display monitor is half closed. How can I fix this problem?
    Thank you for any help you can offer to me in solving this problem. ..

    The speaker is installed at the bottom of the notebook please make me correct if it is on Display Panel.
    Make sure you have the updated Audio driver and BIOS.
    Please refer to the web link http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_list.aspx?CategoryID=370748
    You may also connect the external speaker and check if the same issue appears.
    Best Regards,
    Tanuj
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • External Speakers not working with docking station

    A thinkpad is in a docking station and external speakers are plugged in, they don't have any sound. The speakers work fine if they are plugged into the laptop itself. Does anyone have the solution?

    Hi, sjadnew
    Apologies, as I wasn't too clear in my last post. If you look on the bottom of the computer, you should see a seven digit code in the format of XXXX-XXX, which is your machine's make and model. If you look on the bottom of the docking station, you should also see a model number, though it may be in a different format. This information can be used to look up the exact docking station and computer hardware to better diagnose. If possible, I would try putting in a request with the IT department to see if you can get the drivers updated.
    Best,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • Sony docking station speaker not working with iPod touch

    We bought a Sony docking station for the iPod touch (4th generation) we got our son for his birthday.  The speaker on the docking station works when playing the radio, but not the iPod touch.  We returned the docking station for another, and we are having the same problem.  Which is why I am pretty sure the problem is the iPod touch and not the docking station.  The docking station actually will charge the iPod, just not project sound out of the speaker with the iPod.  It will, however, project sound out of the speaker when using the radio.
    Is there anything simple I could be missing in settings?  I can't figure this out.  TIA!
    Nick's mom

    Use the communities search box in the upper right and search for
    sony.
    The go to advanced search and limit search to the the iPod touch forum.
    Recently there has been several users posted here with the same problem with a Sony dock. I do not recall if it was solved.

  • W520 docking station ethernet not working

    Again another small issue with the docking station.  Before I begin, i'll let you know i've tested the router, the cables, and other sorts, and they are all working.  So i don't think that's the issue.
    My issue is that when I plug my ethernet cable into the back of my docking station, i get an ip address, but cannot connect to any websites.  However, if i undock and take THAT SAME CABLE and plug it directly into the laptop, i get an ip address but can also connect to websites.  Any thoughts? i thought it might be a driver issue, but i just updated everything on the computer and still no luck.
    Any help would be greatly appreciated.  Thank you

    Not sure if this is the case with your docking station, but in the past, the ethernet NIC in the Lenovo docking bays were actually a third NIC, not a pass-thru. So it is conceivable that the IP settings (in particular Default Gateway and the DNS server addresses) are not set correctly.
    Plug your docking bay back into Ethernet, and after you get your IP address, open up a command prompt, try IPCONFIG /ALL, and see what you get back.

  • Speakers not working when using iTunes on new Dell computer

    I just got a new Dell Latitude e4300 laptop and the speakers will not work with iTunes. I can play audio from any website, but am getting nothing in iTunes. Any idea why this would be? Any fixes for this?
    Jeff

    Hi,
    Please try to diable HDMI sound from Playback devices
      Right click the speaker icon,
      Select Playback devices
      Right click HDMI sound
      Disable it.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Nano6th-Speakers not working when connecting to Nano

    My new Ipod Nano(6th Gen) does not work with the speakers i have that i had used with my Ipod Nano (1st gen). Speakers are in working condition-Anyone know why? Does the my new nano(6thGen) require different speakers?

    2 days ago, we have added 4th node to the existing 3node RAC. Is that given any issues.
    below are the things i checked.
    $->srvctl status scan
    SCAN VIP scan1 is enabled
    SCAN VIP scan1 is running on node qysqalccoredb01
    SCAN VIP scan2 is enabled
    SCAN VIP scan2 is running on node qysqalccoredb03
    SCAN VIP scan3 is enabled
    SCAN VIP scan3 is running on node qysqalccoredb02
    $->srvctl status scan_listener
    SCAN Listener LISTENER_SCAN1 is enabled
    SCAN listener LISTENER_SCAN1 is running on node qysqalccoredb01
    SCAN Listener LISTENER_SCAN2 is enabled
    SCAN listener LISTENER_SCAN2 is running on node qysqalccoredb03
    SCAN Listener LISTENER_SCAN3 is enabled
    SCAN listener LISTENER_SCAN3 is running on node qysqalccoredb02
    why it is not running on 4th node. Please let give some ideas.

  • Speakers not working when using external monitor

    I'm using an HP Envy laptop and HP Pavilion 25bw external moniter connected via HDMI cable. Using Windows 8.1. When the laptop lid is closed the sound is turned off. If I open the lid I get sound for about 2 seconds then it goes off. If I remove the HDMI cable, the sound comes on. How can I get the sound to work with the 25bw connected and the lid closed?
    This question was solved.
    View Solution.

    Hi,
    Please try to diable HDMI sound from Playback devices
      Right click the speaker icon,
      Select Playback devices
      Right click HDMI sound
      Disable it.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

    My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

    Clean iPhone charging port with a clean dry toothbrush. The iPhone port has a short, and falsely senses it is in a dock device.

  • Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!

    Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!

    Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!

  • When apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

    when apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

    there is no problem with B/T and iOS7.0.3 in my case used on iPhone 5 and 4 in several environments including in car
    Do a reset
    restore with back up and if required as new

  • My ipod nano this morning has started to tell me the accessory (lightening to 30-pin adaptor) I use for playing it through my docking station is not supported. It worked fine up until last night. Does anyone know why this might be?

    My ipod nano this morning has started to tell me the accessory (lightening to 30-pin adaptor) I use for playing it through my docking station is not supported. It worked fine up until last night. Does anyone know why this might be?

    Clean any debris from the adapter, docking station connector and the connector on the Nano.

  • When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

    When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

    If you see a red light in the audio output port, then the internal switch is stuck.  Insert the earphone plug a few times and see if you can trip the switch.  If that fails, insert a cocktail stirrer and the like and jiggle it around inside.  If that fails, take it to an Apple store and have the technicians at the genius bar do it for you.
    Ciao.

  • TS1286 MY MUSIC WILL PLAY THROUGH THE IPOD BUT NOT THROUGH ANY DOCKING STATION SPEAKERS. IT USED TO, BUT JUST SUDDENLY STOPPED.

    My music will play through my ipod speakers, but it won't work through docking station speakers. It used to but then just suddenly stopped. Can anyone help??

    I just had this problem tonight and here is what worked:  Go to Settings; General; Software Update; and update to the new iOS:  6.0.1.  It worked for me, hope it works for you!

Maybe you are looking for

  • Order is locked by user while filling setup table

    Hi Experts, Yesterday while i am filling setup table for 2LIS_DM_VAITM (DBM Sales) data source it got cancelled. It showed that " Order xxxxxx is locked by user". Because we have DSO concept in our CUBE, we didn't lock users. But then the basis check

  • Problems with Full restore using Time Capsule backup???

    For some reason my MacBook Pro recently crapped out completely, and I am trying to do a complete restore of the OS via a full backup I made with using Time Machine onto my Time Capsule disk, but I am running into some problems doing so and I was hopi

  • Script o/p problrm

    Hi guys, script o/p is displayed in development is correct but in production o/p is different. I found one problem that is,  one std script name is J_1I_ARE1, COPY this script and did some modifications and saved as y_J1_I_ARE1 AND it is stored in th

  • JPA 1.x,: parent (one-to-many) and children(many-to-one) in the same table

    Hi, excuse me for silly question, but I can't get on with subject. Please, see my @Entity: @Entity public class Department {      @Id      @GeneratedValue(strategy=GenerationType.SEQUENCE, generator="DEPARTMENT_SEQ")      @SequenceGenerator(name="DEP

  • PhotoViewer Samples app from adobe won't work

    here's the error: Unable to resolve a class for ResourceBundle: Strings anyone experiencing the same problem? I am using Flex 3 beta but i got the same error in Flex 2. Maybe because i am installing both versions in the same pc?