HT1665 Why does my ihome no longer work properly since my iPod update

My ihome no longer works properly since I updated my iPod to the most current software update. Is there a fix?

Sometimes thisworks:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings      
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:                                 
iOS: How to back up                                                                
- Restore to factory settings/new iOS device.             
However,sometimes an iOS update breaks compatibility and you have to wait for either an iOS update or and update to the iHome firmware. Go to iHome's support site

Similar Messages

  • Why does my google toolbar not work properly with the new updates. It was such a convenience to use the old toolbar to go to places I had visited before. Now I cannot get those old addresses with anything but Firefox 3.62 or whatever.

    Why does Google Toolbar not work with the newer versions of Firefox.

    Google have stopped supporting Google Toolbar on the latest versions of Firefox. Apparently one of the reasons for this decision is that modern browsers already tend to support many of the functions that google toolbar provides.
    Firefox does allow you to specifically bookmark sites you have chosen, and also automatically remembers many of the sites you visit.
    * see [[how do i use bookmarks]]

  • Java no longer working properly since last firefox update

    Since the latest firefox update, Java no longer works as it should on my banking website. The authorisation procedure uses Java, but the box freezes and does not finish loading. It still works fine on IE. I use Windows 7.

    Mozilla are aware of the issue in Firefox 3.6.14 with some Java applets not working and are working on a fix, no timescale but they are planning on a quick release.

  • Why does Maverick mail no longer search properly? I used to search for a name and it would find it in All mailboxes. Now it sometimes works, but mostly not. Any solutions?

    Why does Maverick mail no longer search properly?
    I used to search for a name and it would find it in One or All mailboxes. Now it sometimes works, but mostly not. Any solutions?

    I would like to add that Comcast is my internet provider. Perhaps that is part of the issue although the Connection Doctor confirms the mail box is connecting to the internet. No other function processes when Connection Doctor program is used to find the source of the issue. I have read forum posts but am unable to find a way to get my Apple mail to be delivered to my computer. It worked fine up until I chose to transfer mail to the Cloud. My mail account is a .mac account.
    Still hoping someone out there can help me.
    thanks,
    anne

  • Why does my n81 doesn't work properly in Vodafone ...

    Why does my n81 doesn't work properly in Vodafone Live?? I can't download....etc

    Hi,
    I'm sorry to hear that you're having problems downloading from Vodafone Live.
    If you're able to access the pages of Vodafone Live then the settings in your handset are correct else you wouldn't get that far.
    It's possible that there's a problem with your account that’s restricting you from downloading which will need to be looked into. Rather then transferring your account details on the forum would it be possible for you to contact me via email by completing Vodafone Online Contact Forum following the link below.
    https://online.vodafone.co.uk/dispatch/Portal/appmanager/vodafone/wrp?_nfpb=true&_pageLabel=Page_Hel...
    Please fill in all the fields and include the code FIT135 to ensure that the email is directed to the forum Team.
    As soon as we receive your email we can look into this further for you.
    I look forward to hearing from you.
    Techgirl
    Vodafone UK

  • Why does it take so long to back up whilst im updating from 4.3.5 to 5.0?

    Why does it take so long to back up whilst im updating from 4.3.5 to 5.0?
    its been on for ages and its not even a quarter of the way backed up!

    The Brave New World of AC wireless networking.. where the reality falls far short of the hype.
    Unfortunately in an actual transfer situation, the signal to noise of wireless (RSSI figure drops dramatically), It simply uses AC as a link speed but speed is always renegotiated during an actual file transfer.. to some sustainable level. I suspect that level is not AC wireless but N.
    It does matter if you run older devices.. nothing with a or b or g wireless should be running in your house. Even n wireless may cause issues.. try turning everything else off and see if you get speed lift.
    As far as the time required for a clean up, is this a first backup as they always take a significantly longer time. Once you are doing regular incrementals the time is usually very short.

  • Why does the Autofill no longer work on my macbook

    Why is the autofill no longer working on my macbook?

    Have you tried connecting to your computer and sync using iTunes? If it will sync that way, the means the problem is the wireless sync. One step in the troubleshooting process. You also might want to consider posting here.
    iPad Community

  • Why does my button no longer work in Flash Player 8?

    Hi,
    I have built a site in Flash MX a while ago. Now I’d
    like to upgrade things a bit while testing the new Adobe Flash CS3.
    To be able to use a new function (“anti-alias for
    readability”) the program warns me that “this feature
    is not supported by Flash Player 6. To use this feature, you must
    target Flash player 8.”
    So I change the setting to Flash Player 8, leaving
    Actionscript to version 2.0.
    However, now one of my main menu buttons no longer works!
    When I change settings back to Flash Player 6, things are fine
    again. What am I overlooking?
    Below is the script for the button (which has an instance
    name). Does anything change with the actionscript in CS3?
    Thanks for any advise!
    on (rollOver) {
    gotoAndPlay("s1");
    on (releaseOutside, rollOut) {
    gotoAndPlay("s2");
    on (release) {
    _root.Play();

    That's it! It works fine again. Thanks a lot, you made my
    night!

  • Why does my slingbox no longer work on my firefox?

    my slingbox no longer works, even though the slingbox site says it works with firefox 4 or above.

    Because the new iMac don't have an IR receiver for the for the remote.

  • Why does 'Interpret Fields' no longer work in Premiere CS4?

    Although I have moved on personally, my office still uses CS4. For some reason the interpret fields function no longer works, so all my interlaced footage has to be made progrssive to output it!!
    If I load an interlaced clip into the source and view it at 100%, then mess around with the interlacing options...NOTHING HAPPENS!
    I am at my wits end, Adobe no longer support CS4 and re-install didn't help at all.
    Any insight would be greatly appreciated.
    Jim

    Thanks Ann but no dice.
    I'd already trashed the prefs (in fact I printed them off, ripped them up and burned them for good measure!)
    Media & databases also binned.
    I was thinking it may be a corrupt dll or plugin somewhere, but no idea which one might handle the interlacing?
    Jim

  • Why does air display no longer work from IMac, with mavericks to apple tv???

    Ever since last two updates of Mavericks, I have not been able to broadcast to apple tv as extended or mirroring desktop. It says it is avalable, and does nothing but a black screen on apple tv, and does not even come up as a desktop in display prefrences. What should I do?   IMac:10.9.2

    Hello, IamOMan. 
    Thank you for visiting Apple Support Communities.
    Sometimes a simple power cycle of all devices can resolve this issue.  However, I would recommend taking a look at the section labeled Troubleshooting AirPlay Mirroring in the article below.  Make sure all updates have been processed for the Apple TV and Mac prior to troubleshooting. 
    About AirPlay Mirroring in OS X
    http://support.apple.com/kb/ht5404
    Cheers,
    Jason H.

  • Why do apple products no longer work properly

    the apple TV has so many bugs its unbeleivable when are apple going to get there act back together and save their reputation, becuase right now its going down hill fast.  I am leaving the apple family next time i need to buy hard ware it wont be apple, the cost is too high and th quality is no longer there!!!

    Welcome to the Apple Community.
    Unfortunately I think you will struggle to find the solution to your problem, as you are most likely looking in the wrong area.
    I spend many hours reading about and testing things on the Apple TV, there are a couple of bugs I'm aware of, but when it comes down to networking the only bugs I see discussed are from a small minority who seem to have difficulty excepting the situation. Ask yourself this, if there is a bug, why does it not affect everyone using the same hardware with the same software.
    If you have doubts, take your Apple TV and your mobile device to an Apple Store (or even a friends house, but the Apple Store would be a more controlled environment) and check it out.

  • Why does only my magic mouse work with 10.6.8 update?!!!

    Hi. Ever since updating my software to 10.6.8, the ONLY mouse I can use is the Magic Mouse - ANYTHING ELSE I try and use, wireless or not, will cause my computer to crash. I get asked to turn it off and back on. As soon as I try another mouse, I get a black curtain go down my screen and the message comes up. I have been getting these Kernal Panic things also when I start up with another mouse connected. I HATE THE MAGIC MOUSE! And now I am being forced to use it. Is Apple serious about this? It's ridiculous. I can't work properly with this mouse. HELP!!!!! Is there going to be any fix?

    If your HP is networked and using Bonjour as a protocol, then the 10.6.8 update made some changes to the core backend services such as Bonjour and this could be causing the error. With the job in error in the print queue, you can highlight the job (click once to select it) and then press the Job Info button (the blue circle with the white I inside). Doing this will give more information about the problem. You can post that information back here so we can advise what steps to take next.
    If the printer is connected to the Mac via USB then you may just need to remove the existing print queue, by opening Print & Fax and selecting the HP and then pressing the minus button. With the queue removed you can then click the plus button to add the queue again, selecting the HP in the Default Add Printer view.

  • Win 7 VPN Client 5.0.07 no longer works properly with Citrix DNE Update

    Since Cisco Systems VPN Client does not work properly with mobile broadband on Windows 7, we've been successfully using Citrix's DNE Update to fix this for about 6 months. All of a sudden, machines with the DNE Update stopped working properly over VPN (whether using mobile broadband or not). The only fix is to unbind the DNE Lightweight driver from your network adapters, uninstall the DNE Update and reinstall the VPN Client. However, then you cannot use an aircard with VPN as the DNE Update was the fix.
    Symptoms of the VPN issues with DNE Update:
    -web pages displaying garbled
    -internal web pages not rendering at all
    -remote connectivity not working (VNC)
    -RDP connects then crashes with data encryption errors
    The only change that I can identify on our machines and in our environment would be Windows updates, but I've been unable to identify which one might have caused the problem.
    Has anyone encountered this issue and found a fix? Does anyone know of another reliable fix for VPN Client to work with Windows 7 and aircards?
    We're looking at moving to another VPN solution but that will take time and we need a more immediate solution.
    Thanks in advance for your help.
    Tony

    Hi Prapanch
    No offence . . . .  but you need to read the complete thread before posting re:IP address & gateway
    I'm not posting head end config because the config works with XP
    There are no W7 specific parameters with ASA 8.3(2)
    Multiple W7 machines have been used to test this.
    We are looking at extracting level 15 logs from the client end - I will post if they don''t give an obvious answer.
    TAC still not able to resolve this.
    Rgds
    Barry

  • My BBZ10 is not working properly since my last update (OS 10.3.1.224​3

    OK so to start on a positive - I have been the biggest advocate of Blackberry over the last 3 years and have found it a really easy phone to just pick up and use without having to spend much time with user manuals. I started on a Torch and am now using the BB Z10. I found the switch nice and easy & have loved both phones. Up until now, bar the odd little niggle, I have loved using Blackberry.
    I had a notification to update to OS 10.3.1.2243 (no matter how often I read my notification, it would keep changing to unread and start flashing again) which was a nuisance, but I needed to sort through my notifications first and delete FB as the last update I did, restored ALL my FB notifictions since I'd had the phone, so definitely needed to avoid that scenario.
    I could see there had been some changes - layout different, easier to delete messages etc which is great, HOWEVER, I am really disappointed with how it's messed my phone up which I have never had before. There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing. Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before), my ringtone is much softer than it was previously and BBM no longer has a ringtone. Whatsapp, (the current winner of sending messages as I can actually see what I'm typing) actually has a tone but it's really soft, so not only can I not see what I am typing, but I can't hear when I get a message either, even if it's a person who has a specific ringtone for BBM
    My notifications keep freezing (can be when I am on looking at email notifications, Facebook etc) and some of my keys keep freezing when I am trying to type (p is the worst) and is generally making using my BB highly irritating. In fact there are times that I am so irritated that I want to throw my phone on the floor and jump on it. There is nothing wrong with the phone as it worked perfectly prior to the update, so this must be bugs in the new OS which is not good at all as these problems should have been ironed out prior to release.
    Does anyone know me how to fix this or can tell me when the next update is out to fix the bugs? It's all good and well adding all these great features, but if they mess up the basics, none of that is important and if I was nearing the end of my contract, I would definitely not be going Blackberry which is a shame as I've never had an update problem before with BB.
    Solved!
    Go to Solution.

    bunjamin wrote:
    There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
    Hi bunjamin,
    just go to BlackBerry World, and update all your apps including BBM.
    bunjamin wrote:
    Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
    you can turn off the magnifying glass :
    device settings >> accessibility >> magnify mode >> OFF
    you can deactivate the "reset to Hub view" :
    hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
    bunjamin wrote:
    my ringtone is much softer than it was previously
    yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
    KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Maybe you are looking for