HT1688 i have restored my iphone 3gs and put my sim card in it but it will no longer activate. my power button is broken so i cannot turn it off. what can i do to fix this??
i have restored my iphone 3gs and put my sim card in it but it will no longer activate. my power button is broken so i cannot turn it off. what can i do to fix this??
Then the SIM may have failed. Try removing and re-inserting it. If that doesn't fix it, you will have to get the SIM replaced by your carrier.
Similar Messages
-
When device is started the screen says Ipod is disabled. It will not allow me to do anything. How can I fix this issue???
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I have an iPhone 3GS and it recently started to make a Cicada type of sound when pushing the close button on the top right hand of the phone. Can anybody give me feedback on what this is or how I might be able to fix it?
It will be replaced with the exact same model. It is not expensive compared to the full retail price of a new phone (without carrier subsidies).
If you're eligible for an upgrade from your carrier, now might be a good time to consider upgrading to an iPhone 5, though. -
I did the SMC reset for my iMac intel-based and now it won't turn on. What can I do to fix this?
Well, first things first... is the power cord fully plugged into the back of the iMac (and the wall, for that matter)?
Make sure the wall outlet has power, too... I've scratched my head over stupid issues where I forgot to flip a wall switch.
If the outlet does have power, then try doing a pram zap. Command + option + P + R (hold those at startup).
If the machine is receiving power, you should be able to see some LEDs if you look through the bottom grate of the machine to the left of the RAM door. -
I couldn't remember the answers to my security questions. And I couldn't find the option to reset the questions. Now I'm locked out of my account for 8 hrs. What can I do to fix this?
You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(115315) -
Can I buy a white iPhone 4 and put my sim card from my old iPhone 4 in it?
Can I buy a white iPhone 4 and put my sim card from my old iPhone 4 in it?
Yes.
Back your old phone up in iTunes first. Then after you swap the SIM card into the new phone, connect the new one to iTunes and choose "Restore from backup." It should replicate everything that was on the old phone, right down to most of your settings and text message history. -
HT1766 i have restored my iphone 3gs and now it wont activiate
i restored my iphone 3gs and now it wont activate
it was given to me and yes you are right it was jailbroken. is there anyway to get around that or is the phone garbage?
-
I had to change my Apple ID and password. Now when I try to download or buy an app it says your Apple ID is disabled. How can I fix this?
If it says "This Apple ID has been disabled for security reasons", then you will just need to change you password by following these steps: http://support.apple.com/kb/ts2446
If it does not says "...for security reasons" you will have to contact the iTunes Store to have your account 'un-disabled' http://www.apple.com/support/itunes/contact/
Good Luck. -
CANNON EOS 7D get message as "cannot connect with battery" What can i do to fix this problem?
when i turn on the camera and its trying to read the battery the message i get is " cannot connect with battery" i thought it was a defective battery and went out and bought a new one and still kept getting the same message. what can i do ? Does anybody been through this situation from what i hear this is common on the CANNON EOS 7D models only why is that?
Yes! It is a factory defect and Canon should recall 7D and 60D for this problem in stead to charge $230 for their own quality issue. I have 7D and not using it that often, it shows the same error message. Cleaning can not fix it at all! It was the soldering bad point at the battery and the little circuit board next to it, based on an engineer who repaired it by himself. Canon pro's: If you guys are cate about the Name of Canon then take these cameras back and fix them for free! Otherwise, the customers will switch to Nikon soon.
-
Hi!
So here's what happened: My nano has been working just fine. I plugged it in this morning to my computer, and it automatically turned on, but instead of charging, it went to play music. I turned it off. However, it did not switch to charging mode. So I unplugged it, and then I plugged it back in. "USB Device not recognized." My iPod won't turn on anymore, and my computer simply does not recognize the nano.
It may have gotten slightly damp yesterday as it rained a bit when I was walking home (though I kept it covered). When I got home, it proceeded to work for another two hours after that--then I turned it off. And this morning? It doesn't work, as described above.Try cleaning the connector on the bottom of the phone. Use a magnifying glass to see what is stuck inside, a dry toothbrush and/or wood or plastic toothpicks (nothing metal). If that doesn't resolve the problem your phone is broken.
-
My I pod is not showing up in my computer
Hi there mochaflower,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
-Griff W. -
My wife and I are using the same apple ID. Up until last week we used to buy an app and pay for it only once, but use it on both devices.
since last week, the app store asks me to pay again for an app i already paid for on one device. On both devices automatic downloads (in settings) is and was always turned off.
what can I do to fix this?Actually no. After installing an app on one device, I used to see an "install" button on the second device (since it's already been paid for). Now i get the full price button on the second device. I didn't want to proceed with the purchase because i didn't want to be billed twice.
-
i have a classic that seems to be stuck in restore mode, the screen says "do not disconnect'' and i can't restore using itunes. i have tried resetting it and still no good, what can i do to fix this problem ?
Be good to know what the diagnostic results are.
I've also just run into an issue where I couldn't restore an iPod with a corrupt file system, and the "super fix" in that linked article wasn't working for me. I've run across a potentially useful workaround.
iPod Classic went on the fritz today just after syncing. Couldn't restore via iTunes, kept getting 1439 errors, Windows wouldn't format as FAT32, claimed the "Volume is too big for FAT32". Finally tracked down EaseUS Partition Master Home Edition (Free) and formatted as FAT32 with 128k clusters. The iPod is filling back up again. Might be worth a shot here...
tt2 -
I have an iPod Touch version iOS 4.2.1, 8 G capacity, and whenever iTunes tries to sync my iPod, I get an error message saying "Mobile Backup has encountered a problem and needs to close", and the sync fails. I have tried deleting and reinstalling iTunes, and the same thing happens. What can I do to fix this problem?
Try:
iOS: If you can't back up or restore from a backup in iTunes -
I have an older iPhone (3gs) and need to upgrade to a newer phone (4S). I need to get my NOTES, CALENDAR, CONTACTS, PICTURES, etc backed up on iTunes so I can get that data loaded onto the new phone. But not sure how to do that. When I open iTunes it has a button that say "Back Up iPhone", but I'm not sure what that does. When I go into the sync options it say I have another user account and asks me if I want to merge of replace. I'm assuming it's trying to tell me I have an older iTunes Library, but don't know that. Geez, maybe people over 60 shouldn't have iPhones, iTunes just bafles me.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
Maybe you are looking for
-
How to share between iTunes 6.5.3 and iTunes 7.0.2
Hi After upgrading one G4 to Panther (10.3.9) and iTunes 7.0.2, I tried to load the shared music from a different G4 running 10.2.8 and iTunes 6.5.3 and a message popped up indicating that the shared iTunes was "in-compatible" I get this "in-compatib
-
I have a java daemon process A. Process A uses the Runtime.getRuntime.exec() function to run other java process(es) B at fixed intervals. Both A and B do not display any windows, frames, dialogs , messages etc... Process A is started via commandline
-
I downloaded opera mini for my phone and started downloading games from the opera store I played one of them When i exited it my phone shut down Now when i turn it on the tmobile or nokia image doesn't show up just a lil blue question mark I cant acc
-
How to view the xsl-fo template's output in BI Publisher
Hi, How can we view the output for the xsl-fo template that is uploaded to the BI Publisher in our local itself? For RTF Template, we have plugin to view the output in MS-Word itself by clicking the output formats such as PDF / Excel / RTF, similarly
-
Transaction to maintain output conditions for material Doc
Please help me with transaction code to " maintain output condition records" for material documents