HT1688 The number code would not allow me to input a 1 2 or 3 for my 4 digit code. After numerous tries, it now says iphone disabled connect to itunes. When i connected to itunes, it asked for the code, but I could not enter it. How do I fix this probl

The number pad would not let me type in a 1 2 3 for my 4 digit code. After numerous tries, the phone now says iphone disabled connect to itunes. When I connected to itunes, it asked for the code which I was unable to enter. Help!

Open iTunes on computer, connect iPhone to computer with USB cable. Hold both Home and Power buttons on iPhone until iTunes recognizes iPhone in Recovery Mode. This usually takes about 20 seconds of holding both buttons. Restore the iPhone Firmware.

Similar Messages

I just updated the software on my iPad2 and now it's asking for my passcode but I never set one. How can I fix this?

I just updated the software on my iPad2 and now it's asking for my passcode but I never set one. How can I fix this?

I fixed it!!
While not connected to any USB cable I put the iPad in recovery mode.
To do that turn the iPad completely off. Press and hold the home button while turning the iPad on, once you see the apple logo release the home button.
Turn on your OS X mac after it boots up connect the USB from iPod to Mac. iTunes should start. If not launch itunes.
Perform the factory restore process paying attention to all of the screen message windows. Then set up the ipad like it was new.

I have recently updated my iTunes to the latest software. Since then my iphone will not sync with the computer, it doesn't show up in my computer any more. The computer makes the bing sound as I plug in but i am unable to sync, how can I fix this problem?

I have recently updated my iTunes to the latest software. Since then my iphone will not sync with itunes, it doesn't show up in my computer any more either. The computer makes the bing sound as I plug in but i am unable to sync, how can I fix this problem?

http://support.apple.com/kb/TS1538

Downloaded an E.P. and all of the songs play fine except one which skips itself. The play count goes up and if I click later in the song it will play, but it doesn't play automatically, how do i fix this?

Downloaded an E.P. and all of the songs play fine except one which skips itself. The play count goes up and if I click later in the song it will play, but it doesn't play automatically, how do i fix this?

many thanks.
I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

TS4002 I'm getting an error message when I try the click on a link in an email. No associated application could be found. How do I fix this problem?

I'm getting an error message when I try the click on a link in an email. No associated application could be found. How do I fix this problem?

Is this a one-off or a general problem? If a one-off, is it a link to a web page or something else? If not a web page, try control-clicking on it and choosing to download the linked file. This will at least access the file though it might be to something you don't have an application to open with. If you do this, what sort of file do you get? - select it and hit command-i to get information on it.

My ipod works perfectly well when connected to my laptop, but won't even switch on when it's stand alone. Battery is showing as fully charged. Anyone know if/how I can fix this?

Hi, my ipod nano works perfectly well when connected to my laptop, but won't even switch on when it's stand alone. Battery is showing as fully charged. Anyone know if/how I can fix this? Thanks

Take the iPod N ano to your local Apple Store or an AASP to be examined.

HT1819 Podcasts that I had subscribed to with my old computer are invisible in the Itunes store with my new computer. The error message says the podcast is not available in the US. Yet I can still download them on my old computer. How can I fix this probl

Podcasts that I had subscribed to with my old computer are invisible in the iTunes store on my new computer. The error message says the podcast is not available in the US. Yet I could still download the podcast on my old computer before I switched. How can I fix this?

Hello, ted_marx38.
Thank you for visiting Apple Support Communities.
The most common cause for this issue would be media present that is purchased with another Apple ID. When prompted to authorize the computer it may show a different Apple ID. If this is the case, the computer will need to be authorized for this Apple ID. The article below will walk you through the process of verifying if that is the case or correcting the issue if not.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Cheers,
Jason H.

I can't pause downloads in the download window. The button is there but pressing it does nothing. How can I fix this??

I am using Firefox 6.0.2 and I can't pause any downloads. I have both the pause and cancel buttons next to the selected download but cannot use the pause one. I can click it but nothing happens. However, the cancel download button is working. How can I fix this?

I would first update to the latest version of Firefox & attempt to pause the download as you stated to verify if this resolved the issue.
1. On the menu bar click the '''Firefox '''menu and select '''About Firefox.'''
2. The '''About Firefox''' window will open and Firefox will begin checking for updates. If updates are available, they will begin downloading automatically. If Firefox is already up to date, just close the About Firefox window.
3. When the updates are downloaded and ready to be installed, click '''Apply Update.''' Firefox will be restarted and the updates will be installed.
Note: Firefox does not automatically update plugins (like Adobe Flash, Quicktime or Java). Update your plugins at [http://www.mozilla.org/en-US/plugincheck/]
See:
[[Updating Firefox]]

My brothers iPod shows it's syncing from iTunes, he isn't syncing anything though, and it won't turn off or on either. How do I fix this??

When my brother plugs in his iPod touch, it shows he's syncing from itunes. He isn't syncing anything though and we've tried charging it but it won't turn off or on.
We tried to turn it off but it wouldn't do anything. Does anyone know how I can fix this?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My iPad when plugged in says not charging. What could be wrong or how can I fix this?

My iPad when plugged in says not charging.....how can I fix this?

Some USB 2.0 ports and accessories do not provide enough power to charge iPad. When this occurs the message "Not Charging" appears in the status bar next to the battery icon.
Hence it is always recommended to use the iPad charger.
Refer www.support.apple.com/HT4060

When syncing any device, the device screen appears, but there is no text. How can I fix this?

When I connect my phone, iTunes shows the device. When you go to the device screen where you would see the serial number and the check boxes of what you're syncing, there is no text. The Sync and Apply buttons are there but no wording. The check boxes are there, but no wording next to it. So you don't know what you're syncing. I've tried uninstalling and reinstalling iTunes, but it still doesn't work. And it happens with all 5 devices that I sync.

That generally indicates trouble with the Segoe UI fonts on your system, shannon.
Unfortunately, it's a bit trickier to deal with on Windows 7 than other Windows operating systems. (The instructions by Vortical that usually fix it on Vista and XP can't be applied on a Windows 7 system.)
Try having a look through the following (unfortunately rather long) topic for discussions of possible causes of the issue on Windows 7 systems, and possible treatments for the various font-related issues on Windows 7:
iTunes 10.1 Missing Text

HT1212 My ipod says Ipod is disabled connect to itunes, but when i connect to my computer it says i must enter passcode.how do i fix this?

help meeee!

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

HT1349 I have music in my itunes library that I did not download from itunes, when I try to play them, I know get a pop up "could not play, original file could not be found" This started suddenly, I have never had a problem playing this music before.

I have music in the itunes library that I downloaded from another site that all of a sudden will not play. I keep getting the message "original file could not be found" Any suggestions?

that pop up if u delete or moved any song around in ur music folder which ituns cant find it now .you got re do it

Every time i close firefox, to re-open it i have to either log out and log back in, or i have to go through the task manager and end the proccess, otherwise it just says fire fox if already running and it wont open, how do i fix this proble??

Everytime i am finished using Firefox, if i want to go back onto the internet, i now have to either log off and then log back on. or i have to use the task manager and close the firefox process, it is extrlmely annoying as i have to do it everytime, if i try and open firefor before i do either of what i have explained it just comes up with, firefox is allready running please close all windows to open a new one, or end the process...how do i stop this message from popping up every single time i use firefox????

https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

After updating to Firefox 15 on my Vista machine Firefox will not open. I have removed and reinstalled it but still won't open. How do I fix this?

I am running Windows Vista Home Premium and after doing the update for Firefox 15, firefox won't start. I get no error messages or anything it just won't start. I removed Firefox and reinstalled but that didn't help.
What is next to try?

Hi lwhealon
try from Start > Run > and type to check 1 of :
firefox -safe-mode
"C:\Program Files\Mozilla Firefox\firefox.exe" -safe-mode '''or'''
"C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -safe-mode
(to enable the Run box in win 7 see: [http://blogs.msdn.com/b/tims/archive/2006/09/18/windows-vista-secret-3-bringing-back-start-run.aspx enable Run box win 7] )
also check if [http://kb.mozillazine.org/Firewalls Firewall] or/and other security software blocking firefox start (like ad-blocker, web-accelerator etc).
[http://kb.mozillazine.org/Kill_application With Firefox completely closed] (probably because you can not start it), open the [http://kb.mozillazine.org/Installation_directory application folder] (by default, C:\Program Files\Mozilla Firefox on Windows) rename firefox.exe to firefox1.exe, then double-click firefox1.exe. If Firefox runs without problems, it could indicate that your firewall is blocking Firefox.
good luck

HT1688 The number code would not allow me to input a 1 2 or 3 for my 4 digit code. After numerous tries, it now says iphone disabled connect to itunes. When i connected to itunes, it asked for the code, but I could not enter it. How do I fix this probl

Similar Messages

Maybe you are looking for