HT1689 can i use an old iphone that is not being used as a phone as just an ipod?

Can i use an old iphone that is not being used as a phone as just an ipod?

Yes. Instructions are here: http://support.apple.com/kb/HT3406

Similar Messages

  • Cannot delete an old vault that is not being used.

    Cannot delete an old vault that is not being used. I get the following notification: The operation can’t be completed because the item “#3 Vault-GTech RAID mini-1TB” is locked.  I placed this vault on a external HD until I set up a new vault with the same name in Aperture.
    Now I want to delete the older Vault. Any suggestions?  Thank you, Bob Stern

    OK think I have it, but you'll need to use the terminal window and sudo to do this If you never used either then read this carefully before you begin.
    start
    Open a terminal, go to /Applications/Utilities and click on the Terminal app.
    Type the following but do not press return: sudo chflags nouchg
    Make sure to enter a space at the end of the above command
    Go to Finder, locate the vault and drag it to the Terminal window at the end of the above command. The mouse pointer will turn into a green plus sign showing you your are dragging the file.
    When you let go the full path of the vault will be at the end of the command, now press return.
    If this is the first time you are running sudo you'll get some text telling you to be very careful. You'll also be prompted for your password, enter it.
    Back in Finder in the Info window for the vault the Locked checkbox should be clear.
    that's it
    good luck, post back if you have any troubles.
    regards

  • How can I unverify an email once it is not being used?

    I changed my iTunes account email once. Now, I need to get back to that email, but Apple says it is being used in another account. I am pretty sure that the first email is not being used for any other account.
    Through Apple's site, I chose "iForgot" to resend the password , so I should be able to login to that email account (if it was linked to another account, like they claim). Apple can't send an email for verification. Actually, they say that the email was sent, but it was not.
    How can I unverify this email once Apple says it is linked to another account, but it is not (if it was, the iForgot email would come)?

    for either method to work the state dividing lines must go past the state borders, for example, the line that divides these two states needs to go north a little bit more, I exaggerated the space so you can see, for your map this gap must be really small. Zoom in where you have trouble making separate shapes and fix it before using either tool.

  • Spooling out profile that are not being used

    hi guys,
    is there anyway to spool out those profile that are not in used or assigned to any username or roles?

    flaskvacuum wrote:
    hi guys,
    is there anyway to spool out those profile that are not in used or assigned to any username or roles?
    SQL> CREATE PROFILE test LIMIT
      2     FAILED_LOGIN_ATTEMPTS 5
      3     PASSWORD_LIFE_TIME 60
      4     PASSWORD_REUSE_TIME 60
      5     PASSWORD_REUSE_MAX 5
      6     PASSWORD_VERIFY_FUNCTION null
      7     PASSWORD_LOCK_TIME 1/24
      8     PASSWORD_GRACE_TIME 10;
    Profile created.
    -- Created but not assigned --
    SQL> select distinct profile from dba_profiles where profile not in (select profile from dba_users);
    PROFILE
    TEST
    SQL>

  • How can I get my old iPhone 5 (Verizon) unlocked for use with another carrier?

    I have an iPhone 5 that was purchased with a Verizon Wireless account.  It is more than two years old and I have since upgraded it to a newer iPhone.  I want to give this phone to a friend in Germany.  His service will provide a new sim, if the phone is unlocked.  How can I get it unlocked so that it is no longer limited only to Verizon Wireless?

        Good afternoon Weth!  That is completely correct. All 4G phones are already unlocked for global use. If you contact your international carrier and insert their sim card, it will be ready to activate on the international network. If you have any questions regarding the compatibility of the international network, please reach out to them directly. If you have any further questions, please let us know. Thanks so much and safe travels to you!
    -KristieQ_VZW
    Follow us on Twitter @VZW Support

  • How do I delete places in the organizer that are not being used?

    In Elements Organizer 12, I think I accidentally created a "place" on the map that I do not want to apply to any photos.  When I try to do conduct an advanced search, the place is appearing as a checkbox.  I do not want this place to show up in the search field, as we have never been there.  How do I remove places that are not associated with any photos?

    If you are accessing emails from multiple devices, you are better off using the IMAP protocol. Then the devices sync with the server and they are all looking at the same information. With POP, you are going to get your emails spread about, some on Outlook, some on the iPad. It could get very confusing.
    By default, the iPad will not delete from a POP server. Instructions for changing this are here: http://support.apple.com/kb/HT3228

  • How to free space that is not being used?

    I have a tablespace with very few data (0.18 Mb) but somehow Oracle is using 10Gb for this tablespace, the tablespace is this one:
    Tablespace Name and Mb FREE_SPACE USED_SPACE TOTAL_SPACE
    HIST_PROMOTIONS_IDX 10099,8125 ,1875 10100
    The tablespace is composed by this 3 data files:
    FILE_NAME ALLOCATED_MB USED_MB FREE_SPACE_MB
    /oraindices/IRI9/data/HIST_PROM_ID1.dbf 5000.00 .06 4999.94
    /oraindices/IRI9/data/HIST_PROM_ID2.dbf 100.00 .06 99.94
    /oraindices/IRI9/data/HIST_PROM_ID3.dbf 5000.00 .06 4999.94
    Is there any way to reasign the space usage for this tablespace?
    thanks

    If I read this correctly, only a couple of MB are used in that tablespace.
    The resize should work, but you'll still have 3 datafiles where 1 would suffice. Also, sometimes, it will give you an error because blocks are located towards the end of the file.
    I would create a new tablespace using the size being used and move the objects in the large tablespace into this new one (move tables and rebuild indexes). When all is completed, take the large tablespace offline and, if all works well after a couple of days, drop that large tablespace.

  • How to remove the bufgs that are not being used

    Hi,
    I have a IP block that has BUFGs that may or may not be used depending on which design the IP block is used. If they are not used I would like them to be removed but the tools are not consistent, sometimes they remove them and sometimes they do not.
    How do I specifically tell Vivado to remove a BUFG in the .XDC file?
    I've seen someone suggest to use the following attribute in the VHDL file but I need something in the XDC file
    attribute buffer_type of drck_i : signal is "none";
    Thank you,
    Luis

    Hi 
    If the BUFG instance is instantiated in the IP or your design then the buffer_type attribute will not work.
    The opt_design trims the unconnected instances during implementation. Ensure that the BUFG does not have  DONT_TOUCH property set on it which might affect trimming.
    Thanks,
    Deepika.

  • How to identify SQL_PROFILES that are not being used?

    In dba_hist_sqlstat table were found 26 Sql_Profiles, some of them are not used.
    Questions:
    - Is there any way to identify which one are not used?
    I tried verifying DBA_SQL_PROFILES but this does not help to much.
    - Analyzing one by one, Is the only way to find why they are not used?
    Thanks,
    Deyanira

    Hello;
    You should be able to Join the views DBA_USERS and DBA_PROFILES to see whats in use. ( or not in use )
    select distinct
      profile
    from
      dba_profiles
    where
      profile not in ( select profile from dba_users )  On the second question I would ask the DBA.
    Best Regards
    mseberg
    Dan is correct. I have misread the question. Sorry about that.
    Edited by: mseberg on Jun 28, 2012 3:06 PM

  • Using SC Profile Templates - {{AI_HOSTNAME}} variable not being used

    I'm having trouble with using AI System Configuration Profile Templates.
    I cannot get the AI_HOSTNAME, AI_IPV4 and AI_NETWORK variables to be passed onto the install client. Has anyone had any success with this?
    Amongst all the usual stuff, my SC template contains these lines:
    <propval type="astring" name="nodename" value="{{AI_HOSTNAME}}"/>
    <propval type="net_address_v4" name="static_address" value="{{AI_IPV4}}/25"/>
    <propval type="net_address_v4" name="default_route" value="{{AI_NETWORK}}"/>
    The lines are taken from the "Installing Oracle Solaris 11 Systems" example.
    Then I submit to the AI service
    # installadm create-client -n s11-sparc -e aa:bb:cc:dd:ee:ff
    # installadm create-profile -n s11-sparc -f <profile_file> -p <profile_name> -c mac="aa:bb:cc:dd:ee:ff"
    The documentation shows that afterwards I should be able to do "# installadm export -n s11-sparc -p <profile_name>" and see the {{AI_placeholders}} replaced with the variable values. But all I see are the unchanged {{AI_placeholders}}.
    I have tried exporting the variables first as suggested in the installation guide, e.g.,
    # export AI_HOSTNAME=myhost; export AI_IPV4=10.245.129.175; export AI_NETWORK=10.245.129.129
    # installadm create-profile -n s11-sparc -f <profile_file> -p <profile_name> -c mac="aa:bb:cc:dd:ee:ff"
    I have tried the other method shown in the 11.0 installation guide. In this case the sc profile isn't found during AI (which makes sense because the -c are selection criteria, AI can't match what isn't defined yet).
    -c hostname="myhost" -c ipv4="10.245.129.175" -c network="10.245.129.129
    I have been referring to Chapter 11 of "Installing Oracle Solaris 11 Systems". The documentation for Solaris 11.0 and Solaris 11.1 is quite different. The 11.0 guide looks more correct than the 11.1 guide. But neither are working for me.
    11.0 http://docs.oracle.com/cd/E23824_01/html/E21798/glhwo.html
    11.1 http://docs.oracle.com/cd/E26502_01/html/E28980/glhwo.html
    Additionally the man page examples are quite different. http://docs.oracle.com/cd/E26502_01/html/E29031/installadm-1m.html Example 20 seems particularly nonsensical.
    When the client installs, everything else in the defined in the sc profile is correct, but the hostname stays "solaris" and the IP and default route are the ones assigned by DHCP. The {{AI varaibles}} I passed in are ignored.
    My environment:
    AI server is Solaris 11.1 SRU 1.0.4 ([email protected],5.11-0.175.1.1.0.4.2 and [email protected],5.11-0.175.1.0.0.24.1736)
    IPS repo contains Solaris 11 11/11 (up to SRU 13-04) and Solaris 11.1 (up to SRU 1.0.4)
    Install client is a logical domain on SPARC T4-2 ([email protected],5.11-0.175.1.1.0.3.0)
    Missing JumpStart :-(
    Rick
    P.S.
    In the Oracle Knowledgebase the only reference to AI_HOSTNAME is this bug
    Bug 15729916 : SUNBT7068653 PROFILE CRITERIA NOT CORRECTLY INPUT FOR TEMPLATING
    Says it was fixed in Solaris 11. Maybe it broke again, or maybe I'm just missing something.
    Edited by: user1077157 on Dec 3, 2012 8:30 PM

    Hi William,
    Thanks for confirming that there is no current template variable to represent the default router IP address. That's what I had concluded but I wanted to be sure of it before I a put a work around in place. As you said, this templating is new, but that's why I wanted to investigate because it looks like it could solve a few problems for me.
    I reckon you're right AI_NETWORK didn't change between 11.0 and 11.1. It's just that the doco changed in the meantime and some months had passed since I last tried to use it. In September (we were on 11 11/11 SRU 8) I couldn't get AI_NETWORK to work as the default route as indicated in the 11.0 installation guide, so I put the IP addresses of the routers in my SC profiles and made a note to come back to it later. After updating to 11.1 I came back to it and found it still didn't work, but it wasn't working for different reasons.
    Here is our use case:
    We would prefer not to rely on DHCP for providing configuration data at install time. This is for operational and change mangagement reasons rather than technical. In our organisation there is no DCHP in the Production Data Centres, IP configuration is static and that is the end of the story. DHCP is available in some parts of pre-production environments. wanboot is available most places.
    So we need a provisioning mechanism that can use DHCP if it is available, but use something else otherwise. OBP network-boot-arguments seems to be the "something else" for SPARC network installations. (We'll also have to provide distribution constructor ISO images for installing clients in new sites where the network infrastructure is not complete -- but that's another story).
    In parts of the network where DHCP is allowed, it may not be set up. This can take several weeks to be implemented because it crosses several lines of business. The security team have to set up ACLs in the firewalls, the network team have to configure ip-helpers on the switches to pass DHCP requests along, another part of the network team have to configure the routes, the AD team have to provision a new DHCP range, scope and next-server value to direct to the AI server, the DNS team have to create placeholder A and PTR records. Some tasks can occur concurrently although others cannot. Then we add change control, approval processes, documenation updates and liaison with outsourcing providers to all this... it becomes a non-trivial case.
    If the field engineer who racks and cables the server to the management vlan (or the sysadmin that creates a new LDom) can simply add some OBP variables then 'boot net - install' that will save a heap of time and money.
    I don't think that we are unique in our requirements. I've worked in several organisations where there have been similar contraints.
    That's why I would like two more AI_ variables for SC Profiles, namely AI_ROUTER and AI_NETMASK. These would map to the router-ip and subnet-mask in the OBP network-boot-arguments.
    For consistency with AI_IPV4 maybe they should be AI_ROUTERV4 and AI_NETMASKV4. The existing AI_NETWORK should probably be AI_NETWORKV4
    In the meantime, the workaround I mentioned will be a first boot script called by an SMF service. It will look for eeprom network-boot-arguments. If none are defined, nothing will happen. Otherwise, if the OBP host-ip matches the current IP and the OBP hostname matches the current hostname and the OPB router-ip does not match current default route, the script will assume that the client has been freshly built with "boot net - install" (I might check a few things in /var/log/install/install_log too). It will then delete the default route and add a new one using the OBP router-ip. It'll then clear the OPB network-boot-arguments and restart the sendmail and dns client services.
    The build team will then have the option of creating an SC profile from the template with AI_ placeholders or creating an SC profile with specific values, In both cases they can set the OBP network-boot-arguments and bypass DHCP.
    Cheers,
    Rick
    P.S.
    Thought I should add the reasoning for AI_NETMASK (aside from the fact that it is grabbable because it is in the OBP network-boot-arguments list).
    I envision using AI_NETMASK to reduce the number of SC profiles I will need, for example
    <pre>
    Service/Profile Criteria
    s11-sparc
    net22 netmask = 255.255.252.0
    net23 netmask = 255.255.254.0
    net24 None
    net25 netmask = 255.255.255.128
    net26 netmask = 255.255.255.192
    net27 netmask = 255.255.255.224
    net28 netmask = 255.255.255.240
    </pre>          
    The net+NN+ profiles themselves will be identical except for one thing, the CIDR notation subnet bits at the end.
    +<propval type="net_address_v4" name="static_address" value="{{AI_IPV4}}/24"/>+
    At the moment because only AI_NETWORK is available, so I will need an SC Profile for each network that is not a /24 That will get ugly eventually.
    As I understand it, you want to maintain a direct mapping between AI_ variables and the network-boot-arguments key-value pairs. But if you're open the having some AI_ variables that are derived or calculated at install time there are a couple that would be nice to have.
    AI_MASKBITS - calculate the CIDR notation mask bits from the network-boot-arguments subnet-mask, e.g.,
    +<propval type="net_address_v4" name="static_address" value="{{AI_IPV4}}/{{AI_MASKBITS}}"/>+
    AI_IPV4CIDR - even nicer - network-boot-arguments host-ip, slash, CIDR maskbits calculated from network-boot-arguments subnet-mask, e.g.,
    +<propval type="net_address_v4" name="static_address" value="{{AI_IPV4CIDR}}"/>+
    Edited by: user1077157 on Dec 5, 2012 10:14 PM

  • Can't access Exchange ActiveSync server - SSL certificates not being used

    When I try to set up my email via Exchange ActiveSync to a corporate server, I am unable to connect. I am using the same exact settings as on an iPhone, where I am able to successfully connect.
    Reading the console log in the iPhone configuration utility, the problem appears to be that the iPad is not using the corporate certificates I have installed to enable SSL access to the Exchange server. These certificates are installed in the exact same way they are on my iPhone, where they work correctly.
    Has anyone else had a similar problem accessing Exchange mail using SSL certificates? Any ideas on how to fix this? Or is this a bug in the iPad software?

    IM having the same problem. iPhone works fine on exchange atvwork but iPad with same settings says cannot connect to exchange server. Have you figured anything out yet?
    Tom

  • How do i set system preferences to delete file cache that is not being used

    My file cache is using over a GB of memory.  How do i set the system to free up memory that is being held but not used?

    It's normal since Mavericks for almost all memory to be in use, either by applications or by the file cache. That's what you should want, since unused memory is going to waste. The relevant measure of whether memory is in short supply is what Apple calls "memory pressure."
    Apple's explanation of memory pressure is here. If you want a more detailed, technical description, see here, and for the source code, see here.

  • Using Macbook Pro - Iphone 5s is not being recognized by iTunes! Help!!

    I have a Macbook Pro and a Iphone 5s. iTunes is not recognizing my phone. How do i solve this problem? Help!

    Thank you allan this worked, the final thing was updating the driver softwar for the AMDS in device manager. Thanks again.

  • I can not access one of my Apple ID accounts it is an older one and it uses and old email that has been deleted

    I can not access my apple id account. I was set up by an old email that is not in use anymore. How can I get reset that apple ID.

    Click here and ask the iTunes Store staff for assistance.
    (109002)

  • Index not being used in access path

    Hi,
    I have been trying to rewrite a query which currently is taking almost 1min and 25 secs to execute. The database version is 11.1.0.7.
    The query is -
    SELECT COUNT(1)
    FROM TAB1 p
    WHERE p.ACODE = 24377
    AND NOT EXISTS (SELECT 1 FROM TAB2 ph where ph.PKey = p.AKey )
    AND NOT EXISTS (SELECT 1 FROM TAB3 phs where phs.PKey = p.AKey )
    AND p.rflag = 'Y';
    The table originally didn't have an index on p.ACODE. So, I created this index and set it to visible and set the optimizer_use_invisible_indexes parameter also to TRUE. I set the monitoring on this index too. Even though I have created the index on the ACODE column, the access path doesn't use it. Can someone please tell me why this is not being used.
    Below is the explain plan for the sql stmt and the usage of the index -
    I have changed the actual table and column names -
    SQL> SELECT COUNT(1)
    2 FROM TAB1 p
    3 WHERE p.ACODE = 24377
    4 AND NOT EXISTS (SELECT 1 FROM TAB2 ph where ph.PKey = p.AKey )
    5 AND NOT EXISTS (SELECT 1 FROM TAB3 phs where phs.PKey = p.AKey )
    6 AND p.rflag = 'Y';
    COUNT(1)
    1
    SQL> explain plan for
    2 SELECT COUNT(1)
    3 FROM TAB1 p
    4 WHERE p.ACODE = 24377
    5 AND NOT EXISTS (SELECT 1 FROM TAB2 ph where ph.PKey = p.AKey )
    6 AND NOT EXISTS (SELECT 1 FROM TAB3 phs where phs.PKey = p.AKey )
    7 AND p.rflag = 'Y';
    Explained.
    Elapsed: 00:00:00.02
    SQL> @$ORACLE_HOME/rdbms/admin/utlxpls.sql
    PLAN_TABLE_OUTPUT
    Plan hash value: 3942424611
    | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
    | 0 | SELECT STATEMENT | | 1 | 87 | 214K (2)| 00:42:57 |
    | 1 | SORT AGGREGATE | | 1 | 87 | | |
    |* 2 | HASH JOIN ANTI | | 1 | 87 | 214K (2)| 00:42:57 |
    |* 3 | HASH JOIN ANTI | | 1 | 60 | 209K (2)| 00:41:56 |
    |* 4 | TABLE ACCESS FULL | TAB1 | 1 | 32 | 209K (2)| 00:41:55 |
    | 5 | INDEX FAST FULL SCAN| PK_TAB3 | 29918 | 818K| 53 (0)| 00:00:01 |
    | 6 | INDEX FAST FULL SCAN | PK_TAB2 | 3199K| 82M| 5059 (1)| 00:01:01 |
    Predicate Information (identified by operation id):
    2 - access("PH"."PKey"="P"."AKey")
    3 - access("PHS"."PKey"="P"."AKey")
    4 - filter(TO_NUMBER("P"."ACODE")=24377 AND "P"."rflag"='Y')
    20 rows selected.
    Elapsed: 00:00:00.03
    SQL> select index_name,VISIBILITY from user_indexes where index_name='IDX_TAB1_ACODE';
    INDEX_NAME VISIBILIT
    IDX_TAB1_ACODE VISIBLE
    Elapsed: 00:00:00.01
    SQL> show parameter visible
    NAME TYPE VALUE
    optimizer_use_invisible_indexes boolean TRUE
    SQL>
    SQL> SELECT v.index_name, v.table_name,
    v.monitoring, v.used,
    start_monitoring, end_monitoring
    FROM v$object_usage v, dba_indexes u
    WHERE v.index_name = u.index_name
    AND v.index_name = 'IDX_TAB1_ACODE';
    INDEX_NAME TABLE_NAME MON USE START_MONITORING END_MONITORING
    IDX_TAB1_ACODE TAB1 YES NO 05/26/2010 14:13:41
    Elapsed: 00:00:00.10
    Edited by: user12158503 on May 26, 2010 1:24 PM

    Thanks Centinul.
    I apologize for posting in both sections. I put it in the Database General too because I thought I originally posted it in the wrong section.
    The index was not being used because it was doing the implicit type conversion. When I enclosed it in quotes, it returns the result within a second and it uses the index.(whereas without the index it takes around 1min 25 sec)
    Here is the explain plan and execution time after enclosing it in quotes -
    SQL> explain plan for
    2 SELECT COUNT(1)
    3 FROM TAB1 p
    4 WHERE p.AKey = '24377'
    5 AND NOT EXISTS (SELECT 1 FROM TAB2 ph where ph.PKey = p.AgilityKey )
    6 AND NOT EXISTS (SELECT 1 FROM TAB3 phs where phs.PKey = p.AgilityKey )
    7 AND p.rflag = 'Y';
    Explained.
    Elapsed: 00:00:00.02
    SQL> @$ORACLE_HOME/rdbms/admin/utlxpls.sql
    PLAN_TABLE_OUTPUT
    Plan hash value: 2008452282
    | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
    | 0 | SELECT STATEMENT | | 1 | 87 | 5134 (1)| 00:01:02 |
    | 1 | SORT AGGREGATE | | 1 | 87 | | |
    |* 2 | HASH JOIN ANTI | | 1 | 87 | 5134 (1)| 00:01:02 |
    |* 3 | HASH JOIN ANTI | | 1 | 60 | 60 (2)| 00:00:01 |
    |* 4 | TABLE ACCESS BY INDEX ROWID| TAB1 | 1 | 32 | 6 (0)| 00:00:01 |
    |* 5 | INDEX RANGE SCAN | IDX_TAB1_AKey | 4 | | 1 (0)| 00:00:01 |
    | 6 | INDEX FAST FULL SCAN | PK_TAB3 | 29918 | 818K| 53 (0)| 00:00:01 |
    | 7 | INDEX FAST FULL SCAN | PK_TAB2 | 3199K| 82M| 5059 (1)| 00:01:01 |
    Predicate Information (identified by operation id):
    2 - access("PH"."PKey"="P"."AGILITYKEY")
    3 - access("PHS"."PKey"="P"."AGILITYKEY")
    4 - filter("P"."rflag"='Y')
    5 - access("P"."AKey"='24377')
    22 rows selected.
    Elapsed: 00:00:00.02
    SQL> SELECT COUNT(1)
    2 FROM TAB1 p
    3 WHERE p.AKey = '24377'
    4 AND NOT EXISTS (SELECT 1 FROM TAB2 ph where ph.PKey = p.AgilityKey )
    5 AND NOT EXISTS (SELECT 1 FROM TAB3 phs where phs.PKey = p.AgilityKey )
    6 AND p.rflag = 'Y';
    COUNT(1)
    1
    Elapsed: 00:00:00.52
    Can you give me some tips on where I could read about learning to understand the explain plan. I did read a few articles which did help me, but not much. I am looking for something in detail.

Maybe you are looking for

  • Cache Memory Allocator \ Short Term Memory Allocator Issues

    Hi all I have a number of identically configured (High School) Servers which are giving me the same memory errors (some more frequently than others) and I've run out of ideas. They are all HP Proliant DL360 G6 Servers, NetWare 6.5 sp8 with eDir 8.8 s

  • User Settings in Multi-user setup?

    We are using two new CS5 editors in our news department.  We set the machines up on our Domain partly for being able to use NTFS permissions and because our IT department hates stand alone machines. The issue we are having is that each person logs in

  • Import files to ipad

    How do i import URL's into ipad

  • LTA claim in ESS

    In ESS, journey start date , end date details are not coming in LTA claim. Plz explain LTA configuration in R/3 for ESS display. Would appreciate help.

  • CiscoWorks 3.2 running windows 2k3

    Can anybody please provide the patch for this bug CSCtd18854.?? I am hitting this bug but not able to find patch for this on cisco.com. Regds, Channa