HT1689 I can't access the iTunes store any more.  Does anyone have any ideas what I can do?

I have never had any issues going to the iTunes store from my account.  Now, all of a sudden, it just says it's loading but never does.  Not sure what's going on.  Any help would be much appreciated.

Welcome to the Apple Community.
The following article(s) may help you.
Can't connect to the iTunes Store

Similar Messages

  • I have purchased itunes match but the cloud will not load on my ipad 4.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?

    i have purchased itunes match but the cloud will not load on my ipad 4.it works on my iphone 5 & it originally worked on my ipad.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?

    On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
    On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed.

  • HT1551 I am usually fine with my apple tv. However, quite frequently I get the message that apple tv cannot access apple store. i go to my Ipad or Mac computer and I am able to acess apple store easily. Does anyone have an idea on what is wrong?

    I am usually fine with my apple tv. However, quite frequently I get the message that apple tv cannot access apple store. i go to my Ipad or Mac computer and I am able to acess apple store easily. Does anyone have an idea on what is wrong?

    Have you tried connecting it with an ethernet cord?  It could be a wifi issue.

  • My iPhone although i use iCloud to synchronize. does anyone have en idea what can be done?

    i've been on lion for a week now, only to discover that ical on my mac book pro only showa a fraction of the appointments i've entered on my iPhone although i use iCloud to synchronize. does anyone have en idea what can be done

    Try posting this in the iPhone and iCloud forums as well and you will probably get more response from users of those programs.
    Good Luck
    Pete

  • HT2305 can mac os x 10.4 tiger access the itunes store any longer?

    I bought an old ibook G4 on ebay which runs mac os x 10.4.11.  Of course it won't run the newest version
    of itunes so I downloaded itunes 8 but I can't access the itunes store. What am I doing wrong or is my 
    ibook just too old and unsupported.

    Try using iTunes 9.2.1.
    (65690)

  • I can't access the iTunes store - any suggestions?

    One day my iTunes stopped letting me access the iTunes store.  I thought it may have been my log-in so I tried it on someone elses PC and it worked fine.  I have uninstalled, updates windows, and re-installed iTunes and I am still having the same problem.  I have tried working in safe mode and as the administrator and nothing works.  I really need some help - any suggestions?  Thank you!  (Screenshot below!)

    Try the steps in this support article:
    http://support.apple.com/kb/TS4123
    Hope that helps.

  • I cannot access the itunes store any longer from my PC. Why

    I downloaded the Itunes update 11 on Dec 21 and I have not been able to see the the Itunes store since then; I can see my music etc. but I cannot access the store.

    No - it just comes up with a blank page.  I've tried signing on, and nothing happens.  do you think maybe something on my control pad is not set correctly?  It seemed to happen after I upgraded iCloud

  • Something seems to be missing in my registry which means I cannot burn cd's. Also I cannot access the itunes store to download. I have re-installed itunes twice but without any luck. My Advent laptop doesn't have system recovery points so I can't restore.

    The problem is in the registry and not itunes.

    Peter Hah
    After spending another two days on pinning down the iTunes 10.5 blank store page problem, here's the solution to be found: https://discussions.apple.com/thread/3372617?start=0&tstart=0
    Look out for "japiohelp".
    In short:
    a) press Windows key + "R", enter "cmd", and press Ctrl+Shift+Enter (= runs as admin)
    b) enter "netsh winsock reset" and pres enter
    c) reboot the computer
    and Bob's your uncle.
    P.

  • I have windows 7 64 bit, Core i5, I have tried every option identified in the discussion groups but still cannot connect to the iTunes Store, any ideas?

    I have a brand new Core i5 Windows 64bit laptop, but cannot connect to the iTunes Sore.  I have tried every solution suggested in the discussion groups but I still cannot connect.  This includes completely removing all security and firewalls, and I still cannot connect.  I have re-load the software in different combinations again to no avail.  Any ideas anyone?

    Could you walk us through what happens (when you try to connect to the Store) in some more detail, please?

  • Most all my applications are crashing. The Exception Type on all that crash: EXC_BAD_ACCESS (SIGBUS) and Exception Codes: KERN_PROTECTION_FAILURE at ... I am a newbie, does anyone have an idea what has happened?

    Most all my applications are crashing.
    The Exception Type on all that crash: EXC_BAD_ACCESS (SIGBUS) and Exception Codes: KERN_PROTECTION_FAILURE at ...
    All browsers but Safari crash
    I can't view any video media but quicktime works.
    Example: iPhoto
    Process:         iPhoto [2167]
    Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Identifier:      com.apple.iPhoto
    Version:         9.1.5 (9.1.5)
    Build Info:      iPhotoProject-6150000~1
    Code Type:       X86 (Native)
    Parent Process:  launchd [254]
    Date/Time:       2011-09-05 16:25:22.327 -0500
    OS Version:      Mac OS X 10.7.1 (11B26)
    Report Version:  9
    Interval Since Last Report:          734286 sec
    Crashes Since Last Report:           427
    Per-App Interval Since Last Report:  154207 sec
    Per-App Crashes Since Last Report:   2
    Anonymous UUID:                      9AD5F8B1-380F-4563-A57D-A589708BA3D2
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x000000009802d0cb
    Just about everything crashes.
    Help...please?

    How old is this machine? If it's less than 90 days old you have 90 days of Free AppleCare coverage, call them! You will find the phone number in your manual. If it's out of AppleCare or you bought it used take it your local Apple Store or AASP to have it looked at. We don't have enough information to know what the problem might be. You can run some tests such as Apple Hardware Test in Extended Mode 2-3x to see if it has any hardware errors. Beyond that it's really tough to say.

  • ITunes always accessing the iTunes store

    I just upgraded my iTunes to version 7. Now always the bar at the top of the window is always accessing the iTunes store. Why does it do that? I don't want to access the store.
    Thanks for the help
    Linda Reinfeld
    IBM ThinkPad T43   Windows XP Pro  

    I have no more tricks up my sleeve other than maybe it is a firewall issue with your router.
    You can tap or click on the heading below and read Apple's take on the issue. I really don't hold out much hope though that his kb article has any more to offer to you, but I am out of ideas now.
    Can't connect to the iTunes Store
    support.apple.com/kb/TS1368
    Sep 21, 2012 – You may be completely unable to access the iTunes Store on your computer or iOS device. You might also see an alert message similar to one ...

  • Itunes 11 crashes when accessing the itunes store

    When I upgraded to iTunes 11, it started crashed every time I accessed the iTunes Store.  After doing some searching, I decided to try resetting TCPIP on my Windows 8 PC.  Right after I did that, iTunes started accessing the iTunes Store immediately up startup, so it crashed immediately.  My fix was to uninstall everything Apple related and delete the plist preference files.  I also moved my library to a NAS device (not sure if that was necessary or not but at this point I'm scared to move it back).  Then I restarted and installed iTunes 10.7.  I had to recreate may library and I don't have any playlists (but I assume I can import them back in).  In this whole process when I tried to log in to this community site I found out that I needed to update my password.  Not sure if that was related or not.  Also, I tried going back to version 11 and it started crashing immediately, so I went back through the steps and 10.7 is working.  I haven't tried to access the iTunes store yet, though.

    OK.  I went to version 11 again and my crashing problem returned.  iTunes crashes immediately when it opens.  I turned off my wireless connection and restarted iTunes.  It gave me an error that it couldn't connect to the store twice (even though I wasn't trying to browse the store).  After that, it worked fine.  So, now I can at least use iTunes without it crashing.  If I try to go to the store, it crashes again.  So, I'm making progress.  There must be something between Windows 8 and iTunes 11 that causes issues.  It worked fine on this laptop after I did the update while I was at work today, but doesn't work at home, so I'm wondering if this has something to do with profiles.  I'm pretty sure it isn't my firewall, but it could have something to do with my user profile or Windows security settings that change when I am at home versus when I'm at work. 

  • I am getting sync problems with Exchange Server and local outlook. Error code is 18439. Does anybody have an idea what the problem might be?

    I am using Outlook on my Imac, which is linked to the Windows Exchange Server. All off a sudden I keep receiving messages saying that the message Re: xxxx cannot be synchronized with the exchange server. When I delete the message from my local mail box, all is fine, but after a while another one pops up. The error code is 18493. Does anyone have an idea what could be going wrong???
    Thanks for your help already now!

    Hello Wolfgang,
    I get the same error, but I cannot figure it out too. I hope you or I get some responses back! I do not know why there isnt an edit feature in outlook to acknowledge the individual alarm so it does not alarm again!
    Fil

  • How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    read this
    https://discussions.apple.com/message/20429789#20429789

  • Cannot upgrade my ipod touch to iOS5.1 - error:"the network connection could not  be established" Although I can access the itunes store.

    Cannot upgrade my ipod touch to iOS5.1 - error:"the network connection could not  be established" Although I can access the itunes store.
    Running Mac OS 10.7.3 using itunes 10.6
    unplugged other USB devices, disabled security, restarted computer.  Next?

    Try changing the DNS as described here:
    iOS 5 update issues  "Network...: Apple Support Communities

Maybe you are looking for

  • Buffer error using APEX_ITEM

    I have this query on a apex report: select APEX_ITEM.TEXT(1, ATRIBUTO, 30) "Attributes" ,ATRIBID ,VALOR "Actual Value" ,APEX_ITEM.SELECT_LIST_FROM_QUERY(2 ,ATRIB_VLR_ID ,'select VALOR ,ID from ATRIBBVAL where ATRIB_ID = ' || ATRIBID||' order by valor

  • Syn-Asyn Bridge and correlation

    Regarding Sync-Asyn ,I have gone thru these blogs... Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi - Use of Synch - Asynch bridge in ccBPM https://www.sdn.sap.com/irj/sdn/

  • Batch command shuts down program

    New install of Photoshop CS5 for Windows on Windows 7 OS. When I click File | Automate | Batch, I consistently get a "Adobe Photoshop CS5 has stopped working" dialogue box. My only option is to click the "Close program" button. Any suggestions on how

  • What happened to annotations? building components from tables

    File > New > Business Tier > ADF Business Components > Business Components from Tables] there are no longer Entity Beans beign generated.. just useless views. no java files to modify for complex foreign key relationships.. how to go about this?

  • HT3702 It will not let me put in my security code for my bank card