HT1751 Are these instructions correct? They don't mention the ITL file...

Are these instructions correct? They don't mention the ITL file...

I'd say they are generally correct, however they don't account for the circumstances in which, following advice given elsewhere in Apple's support documents, the media folder is no longer contained inside the main iTunes folder. This can happen when the media has been consolidated elsewhere,, e.g. an external drive, due to space constraints. This creates what I call a "split library". In such cases the media folder and iTunes folder (holding the .itl database) each need to be backed up and, when restoring, the media folder must be restored to exactly the same path or iTunes will have trouble connecting to the media.
Should you have created a split library that you'd like to reconnect see make a split library portable.
There is some odd numbering on the support doc. page so I can't give a section number, but the bit on where to find your iTunes folder doesn't make it clear that the "iTunes" (or "library") folder is normally the parent folder of the "iTunes Media" folder shown in the dialog box, and that they are not the same thing. I suspect this is one of the reasons that some users manage to migrate or restore their media only to find they have lost playlists, ratings, play counts etc.
Another issue with the article is that it provides a way to backup the library once, but not to efficiently maintain that backup. Deleteing the entire backup to regenerate it would be a waste of time and potentially risky. See this iTunes backup tip for a suggested strategy.
tt2

Similar Messages

HT4864 Thank you! This may sound lame but are these instructions for the blackberry? I'm receiving iCloud emails without problems on my MacBook Pro and I'd rather not mess w/ settings there.

Thank you! This may sound lame but are these instructions for my blackberry? I'm receiving iCloud emails without problems on my MacBook Pro and I'd rather not mess w/ settings there. Thanks again!

You don't need to start a new thread to continue a conversation, you can just tack onto the original one. The settings I referred you to are for the Blackberry, since that's the device which is not receiving mail: anything which is working can be left alone.

HT2463 Are these ports correct?

Are these ports correct? NTP more usually uses UDP as does DNS. Also, we found that we needed to open TCP5223 as well.

Don't worry, the numbers are correct.
In Intel's calculation, FSB is calculated as Quad Rate, so you'll have to mutiply the reported FSB by 4 which is 200MHz x 4 = 800MHz.

Characters are cut off when they don't fit in the pdf report output.

Hi All,
I understand that Forms 6i and Oracle 9 iAS have been de-supported for years. Meanwhile we do still run a small application in the 9 iAS environment.
We have forms and reports running on Windows 2000 server, I am able to successfully clone the same 9 iAS from Windows 2000 to a Virtual Server Windows 2003 x32 and all runs fine, the only problem is that the fonts in the pdf reports are larger in the new Windows 2003 environment as compared to the original Windows 2000 and characters are cut off when they don't fit in the pdf report output in 2003 env.
Any advice is most appreciated.
Thanks.

You may want to check on the printer driver and paper size selected

JDBC-Adapter - Are these Properties Correct?

Hi,
I am trying to execute a stored procedure on a Microsoft MSSQL Server via the JDBC Adapter.
The adapter is installed like it is described in the Driver-Manual and I configured the Adapter according to the User-Manual of the driver. But it doens't work.
Are these properties correct?!
http://www.devilstorm.com/downloads/jdbc.jpg
Thank you for your help
Thomas

1. Did you check whether your communication channel is active and in green status in the adapter monitor ?
2. If it is in the error status what is the error ? If it is in green status does it say it last polled at date and time ?
3. it is not call ZZ_COPA_ZCHECK, it should be EXEC ZZ_COPA_CZECH.
One other thing is you do not have a namespace, click on Advanced Mode (Erweiterter Modus) and add
Name = docNamespace
Value = <your namespaece>
regards
SKM

Scratches on the back of my MacBook Pro, are these from where they machined the aluminium or was this a worker at the factory being careless?

There are lots of uniform scratches that are evenly spaced on on the back of my MacBook Pro (Retina, 13-inch, Late 2013), are these from where they machined the aluminium or was this a worker at the factory being careless? They are pretty light scratches and sometimes not visible, has anyone got the same on their laptop?
Thanks in advance!

There's no way to know the reason why they are there, but it looks like a human mistake.
You have 14 days to return your Mac if you bought it from Apple, so do it and get a new one. This is what you should do if you have any problem

I would like to know if anyone, after downloading Lion OS, lost their Quicken 2007? If so, what have they done to remedy the problem?

I would like to know if anyone, after downloading Lion OS, lost their Quicken 2007? If so, what have they done to remedy the problem?

From the quicken website:
Converting your data from Quicken for Mac
Create a copy of your current Quicken for Mac data file.
Important: You'll want to use the copy for the conversion. Do not use your original data file.
Launch the Quicken File Exchange Utility (it's located on your Quicken Essentials disk).
Follow the on-screen instructions to locate the copy of your old data file and then convert your data from Quicken for Mac to Quicken Essentials.
Open Quicken Essentials.
If you want to import your old data into a new Quicken Essentials data file that you’ve already started using (optional), make sure that the new data file is now open in Quicken Essentials.
Choose File > Import, and then select the file that you just created during the conversion process.
The conversion file has a .QDFX extension. You’ll find it in the same folder as the copy of your old Quicken for Mac file.

I have a problem in buying zynga poker chips, every time i try to buy chips they tell me contacts itunes support and the the purchase always failed, i contacted zynga but they told me that i have to contact itunes because they don't know the problem ?

i have a problem in buying zynga poker chips, every time i try to buy chips they tell me contacts itunes support and the the purchase always failed, i contacted zynga but they told me that i have to contact itunes because they don't know the problem ?
P.S i always use my credit money from gift cards to buy anything from itunes or in apps - purchasing.
so what do u think should i do ?

Have you tried contacting iTunes support : http://www.apple.com/support/itunes/contact/ ?

Hello After upgrading iPhoto 9.1.2 when you synchronize the iphone / iphoto ipad events are not copied correctly (this option checked all the photos on itunes).

Hello
After upgrading iPhoto 9.1.2 when you synchronize the iphone / iphoto ipad events are not copied correctly (this option checked all the photos on itunes).

I found this other thread discussing this topic, no fix, I will revert to 9.1.1 from Time Machine and wait for a new update.
https://discussions.apple.com/thread/3023160?

I just to a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

I just bought a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

Hi there,
It sounds like your purchased content is not transfering via a flash drive. It may be easier to re-download this contnet directly from iTunes. Take a look at the article below for mor information.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
-Griff W.

Problem importing photos after the new Photos update: When I drag photos from my desktop, why don't they don't replace the previously imported photos in "Last Import".

When I drag photos from my desktop to the new Photos icon, they don't replace the previously imported photos in "Last Import".

After several attempts, I now find that this is working for me. I wasn't able to open the IMPORT folder in Photos until I clicked on "Close" from File Menu. Once I was able to open the IMPORT folder and select the photos for import, the new photos appeared in "Last Import."

CC 2014 trial. MPEG MOVIE clips flickering on my time line! after render, and after export. tried all kinds of sequence settings,taking out transitions and effects ,even the audio tracks.....still flickering. They play fine outa the project files!? HELLL

CC 2014 trial. MPEG MOVIE clips flickering on my time line! after render, and after export. tried all kinds of sequence settings,taking out transitions and effects ,even the audio tracks.....still flickering. They play fine outa the project files!? HELLLLLPPPPP!!!!

We can not see your computer, your settings or even know what your source files are because we are not in the same room as you are!
We cant see what you are doing wrong ...so you will have to tell us a lot more and show us some screen grabs of your settings.

We are currently looking for a way to link images to a design file within programs like InDesign and Illustrator using an HTML link instead of a local file. We are hosting our images in SharePoint and need the design file to retain it's links, no matter

We are currently looking for a way to link images to a design file within programs like InDesign and Illustrator using an HTML link instead of a local file. We are hosting our images in SharePoint and need the design file to retain it's links, no matter who on our network opens the design file.

The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

How can I update Dreamweaver 8 to 8.0.2 if I don't have the .MSI file?

How can I update Dreamweaver 8 to 8.0.2 if I don't have the .MSI file? I have moved this old copy to newer computer/operating system and don't have all the original discs and things.

Donny4646 wrote:
And you can move an installed application if you move a few other files manually and without getting into the registry.
I'm very skeptical about that as I have dozens of Registry entries associated with my older DW installation.
Still trying to assist anyway. Check this thread for a reported successful resolution
https://forums.adobe.com/message/4215502
Also try this:
Download the unwrapped 8.0.2 update from Adobe: http://kb2.adobe.com/support/dreamweaver/ts/documents/kb400150/DW802_unwrapped.zip
Extract the files into a root directory. There should be only one MSI file.
Open an administrator privilaged command prompt by typing in the Start menu "Command" and right clicking the "Command Prompt" option and selecting "Run as Administrator"
Navigate to the directory you extracted the files to using the CD command
Once in the directory with the MSI file run the following command: msiexec /update patchpackage.msp
Step through the installer, and everything should be fine, open Dream Weaver and go to Help -> About to verify the patch installed.

What exactly are these parts that they replaced?

Okay, so I just got my MacBook about 20 minutes ago from a main logic board replacement. Only, it says all these other things that were replaced as well. Can someone tell me WHAT they are?
SVC, Bezel, M42, PCB, 2.0GHZ DC, SMS/KIONI, Heatsink
Any ideas? I am clueless. The only thing I could really make out was that the main logic board and the topcase were reaplaced as well.

(blushes) I would love to for sure, but I don't have the internet on my Mac yet. You see, I've been in the stone ages with my PC, using AOL...dial up! Yes, I know, who really usues dial up anymore? But it's so easy, and I never had any real need to have wireless. Anywho, I cannot seem to configure AOL to work on the MacBook with a dial up, so I am forced to use my PC (which I am on right now)for my internet needs until I start school again in a couple of weeks (have a free ethernet connection in my dorm room).
Is this something I can download onto my PC, burn to a disc, and THEN transfer it to my MacBook? Or is that totally unheard of and crazy?
Thanks for the help!!

HT1751 Are these instructions correct? They don't mention the ITL file...

Similar Messages

Maybe you are looking for