HT1766 Whenever I try to backup my ipad to iCloud, I get the following error message and can't work out why " the last backup could not be completed" I am connected to my wi FI and iPad off and connected to power. Please can anyone help ?
Whenever I try to backup my ipad to iCloud, I get the following error message and can't work out why " the last backup could not be completed" I am connected to my wi FI and iPad off and connected to power. Please can anyone help ?
In settings>general> cellular do you have it turned ON?
Similar Messages
-
When I try to access GameCenter on my Mac it says "The requested operation could not be completed due to an error communicating with the server." How can I fix this?
This usually caused by a customised hosts file.
These need to be the only entries in your /etc/hosts file:-
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
fe80::1%lo0 localhost
Remove anything below these entries, then try and reconnect with GC. Once GC starts properly you can put the extra entries back in your hosts file, GC should start normally afterwards.
https://discussions.apple.com/message/19276629#19276629
Jerry -
I can't open ITunes, I have an error message that says MSVCR80.dll is not found. Is anyone able to help solve this issue for me. I have tried to unistall and reinstall ITunes twice but continue to get the same error message.
A msi file is short for microsoft installer. It normally is for installation, removal, and maintenance for a program. So iTunes.msi would be used for the updating of the program. For some reason it isnt finding this so we can't update, install, or remove it.
From what I have seen windows installer cleanup utility solved related problems before.
I found this forum about removing and installing a new iTunes. It was about someone who was trying to isntall iTunes, and was looking for msi file and asked for help. Using this should allow you to be able to install iTunes. It won't give you the msi file but will allow you to isntall iTunes over again.
This was what was said.
Another option in case you can't get an msi. (Or even if you can ... the msi's mentioned in the messages may be damaged rather than missing.)
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Restart the PC, and try another iTunes install. Does it go through properly this time? -
I downloaded the newest iTunes to Windows 7 and tried to run it. I received a R6025 error message.
Hello Spelly78,
It sounds like you are unable to install the latest version of iTunes using Windows 7 due to this error message. I would use the troubleshooting in the following article named:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Here is a general overview of the troubleshooting to be done:
General installation troubleshooting
Empty your Temp folder and restart your computer.
Completely remove iTunes and its related components.
Install the latest version of iTunes.
Additional troubleshooting
After performing each of the steps below, you'll need to remove iTunes and its related components and install iTunes again to determine whether the issue was resolved.
Make sure you have an administrator account.
Make sure your folder names don't contain unusual characters.
Get the latest Windows updates.
Disable conflicting software.
Thank you for using Apple Support Communities.
Regards,
Sterling -
I have windowa 7 operating system. When I install I Tunes, I get an error message "Apple Application Support not found".
I have uninstalled and reinstalled I Tunes multiple times with same error.
Can anyone offer a solution?See Troubleshooting issues with iTunes for Windows updates.
tt2 -
I was in the middle of a restore on my Ipad 2 and lost internet connection about 2/3 of the way through the firmware update, and now it fails everytime I try to restore. It says ERROR 2. Can anyone help?
Resolve specific iTunes update and restore errors - Support - Apple
Configure your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore. -
TS3992 Why does my iPhone and iPad say "backup could not be completed"?
Why do I get the message "backup could not be completed after about 5 minutes"?
Welcome to the Apple Community.
First check that your device is correctly connected to the wifi/internet (settings > wifi)
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
More about iCloud v iTunes Back Up -
Trying to commence first ever Storage & Backup but it fails and massages "the Last backup could not be completed" "Last Backup - Never".
Welcome to the Apple Community.
You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
More about iCloud v iTunes Back Up -
Why did it say "Backup could not be completed"? Was it because it estimated the backup would take 3 hours and it timed out?
Welcome to the Apple Community.
First check that your device is correctly connected to the wifi/internet (settings > wifi)
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
More about iCloud v iTunes Back Up -
my iphone 1st gen is stuck in recovery mode and every time i try to reinstall firmware i get an error code 1015 can anyone help please?
Make sure you are using current iTunes on your computer. Click the iTunes Tab at the top of this page. Or try to Restore your iPhone with a different computer.
-
I get the following error message and don't know how to correct it: Sync encountered an error while connecting: Unknown error, Please try again.
There have been problems reported with Sync.
They are working on it, so please try again later when those problems are fixed.
*https://services.mozilla.com/status/
*http://twitter.com/#!/mozservices -
For about 3 month I receive on my iPhone 3GS iOS6 and my iPad iOS5 empty messages without sender and subject in the mailbox BAL but not in the direct mailbox addresses. I cannot get rid of this messages. Can someone help me. Thanks !
Disable Yahoo Messenger (with the arrow on the right of your account name) in Yahoo mail.
-
What do I do every time I tap "Back up Now" (through iCloud) it always says "The last backup could not be completed". My iPad is plugged in, locked and connected to wi-fi. I still have available 11GB storage from 15GB total storage from iCloud.
I'm having exactly the same problem. I have a new iPad, my iCloud account is set up and verified (I wouldn't be logged in and writing this otherwise), auto backups are turned on, but it's never completed a backup. If I manually select 'Backup Now' in iCloud Settings, it times out while estimating time remaining. Strangely, today my iCloud free storage space went from 5G to 4.9G then back to 5G. Annoyingly, I'm now getting reminders that I've never backed it up! The iCloud help I followed from the forum didn't cover this error message.
-
Hi, I'm trying to back up my itouch in icloud but every time I try to hit the button backup now a message that says "the last backup could not be completed" appears. I would like to know why does it appears and what can I do to fix it?
I would be grateful if you answer.Try the following steps:
Plug your iPod Touch to your Mac/PC using USB cable.
Open iTunes software and choose “backup to this computer” .
Then you need to do a sysncing.
Go to iCloud (iPod Touch: Settings > iCloud) and delete all previous backups.
Then in iTunes, Turn on “backup to iCloud” again.
On your iOS device, now you are able to backup to iCloud. -
Whenever I try to update iTunes to 10.5 I get the message 'There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.'
I then uninstalled iTunes to try and reinstall it but I still get the same message for both 10.5 and previous versions, please help!My situation:
- get error when updating iTunes from 1041 to 1050 or above: "There is a problem with this Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
My system: XP SP3 with all latest updates.
Found out that the 1051 update fixes a major intrusion possibility during the update process, so I want to get iTunes upgraded to 1051.
Did more research and the following worked (not known if all steps outlined were necessary) (I do not guarantee success nor any more issues as a result):
- ran: MicrosoftFixit.ProgramInstallUninstall.exe (did JUST the patch option).
- ran: Windows Installation Removal Tool.exe (uninstalled JUST the iTunes program installer folder) (this does not remove the actual program).
- removed all apple software update registry entries.
- removed: C:\Documents and Settings\All Users\Application Data\Apple\Installer Cache\(JUST the software updatefolders) (hidden folder).
- removed: C:\Documents and Settings\current user\Local Settings\Application Data\Apple\(JUST the software update folders) (hidden folder).
- DID NOT need to restart
- downloaded latest iTunes update (1051)
- opened using WinRAR
- extracted all files
- ran JUST the apple software update MSI
- it succeeded
- ran JUST the iTunes MSI
- it succeeded
- normally I then uninstall the apple software update program, but DID NOT this time
- DID NOT need to restart
Hope it works for you.
Maybe you are looking for
-
Cost center in Sales Order/Credit memo request
Hi SAP Gurus, There is a requirement from our client. They are processing Credit Memo from SD VF01 via Credit memo request. The want to assign Cost center in the line items which is greyed out at the time of processing in VF01. I also verified in the
-
Hi, I defined an array and function on the main layer: apple=["a","b","c"]; function displayFruit(fruit){ trace(fruit); On a movieclip, I've got this function: on (release) { _parent.displayFruit("apple"); Upon execution, the output shows "apple". Ho
-
Unable to start BPEL PM Server
All, I am getting the following exception when I try to start BPEL PM Server. Feb 2, 2007 3:40:44 PM com.evermind.server.XMLDataSourcesConfig parseRootNode INFO: Legacy datasource detected...attempting to convert to new syntax. 2007-02-02 15:40:50.29
-
Range partiotion using interval partitioning
Hi all, I am trying to create a partitioned table so that a number (which date converted to number ) partition is created on inserting a new row for release_date column. But please note that release_date column is having number data type (as per desi
-
Delivery with reference to billing
Dears, can i create delivery document with reference to billing document ?