HT1807 My iPhone turns off when I turn the GSM radio on.

The iPhone 4 reboots when GSM radio is turned on. You can use it when it's on a charger, but turn off fast when you use the GSM radio.

Basic troubleshooting steps as outlined in the User Guide are restart, reset, restore from backup and finally restore as a new device. If you've tried ALL 4 of these steps and you're still having problems, by all means, bring your phone into an Apple sotre for evaluation.

Similar Messages

My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

Sorry i mistakenly made this question. It was alright. No Problem At ALL

MAC is turned off when you start the application.

MAC выключается при запуске приложений.
MAC is turned off when you start the application.
P.S. it is desirable to give an answer on the Russian
Interval Since Last Panic Report: 69711 sec
Panics Since Last Report:          1
Anonymous UUID:                    BF785864-5B2E-7638-B9E8-ED938B20D6F6
Thu May 23 20:28:41 2013
panic(cpu 2 caller 0xffffff80242b7e95): Kernel trap at 0x0000000000000000, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x00000000053ca068, CR4: 0x00000000001606e0
RAX: 0xffffff8024813e10, RBX: 0x0000000000000001, RCX: 0xffffff80248e04f0, RDX: 0xffffff8024890100
RSP: 0xffffff810cd7b978, RBP: 0xffffff810cd7b9a0, RSI: 0x0000000000000001, RDI: 0xffffff8045a66410
R8: 0x000000000000000e, R9: 0xffffff8045a90908, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff803e98cc02, R13: 0x0000000000000000, R14: 0xffffff803e98cc10, R15: 0xffffff8045a66410
RFL: 0x0000000000010202, RIP: 0x0000000000000000, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000010, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff810cd7b610 : 0xffffff802421d626
0xffffff810cd7b680 : 0xffffff80242b7e95
0xffffff810cd7b850 : 0xffffff80242cd4dd
0xffffff810cd7b870 : 0x0
0xffffff810cd7b9a0 : 0xffffff80242772b2
0xffffff810cd7b9d0 : 0xffffff8024585aae
0xffffff810cd7b9e0 : 0xffffff80242f0981
0xffffff810cd7ba30 : 0xffffff80242f0021
0xffffff810cd7ba70 : 0xffffff80242f10d6
0xffffff810cd7baa0 : 0xffffff80242ed939
0xffffff810cd7bac0 : 0xffffff8024515c0a
0xffffff810cd7bb20 : 0xffffff802431112c
0xffffff810cd7bb90 : 0xffffff80242fc5f1
0xffffff810cd7bd90 : 0xffffff80242fc93d
0xffffff810cd7bf50 : 0xffffff80245e063a
0xffffff810cd7bfb0 : 0xffffff80242cdd23
BSD process name corresponding to current thread: installd
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST... [Show more]

A: MAC is turned off when you start the application.

I took in the store returned MAC. Although when you start offering configure everything from scratch. The OSes can reinstall?
Last night passed out on completion of the work.
Interval Since Last Panic Report: 75071 sec
Panics Since Last Report:          2
Anonymous UUID:                    BF785864-5B2E-7638-B9E8-ED938B20D6F6
Thu May 23 23:25:35 2013
panic(cpu 2 caller 0xffffff80036b7e95): Kernel trap at 0xffffff80036102b1, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000040001, CR3: 0x0000000079b9d056, CR4: 0x00000000001606e0
RAX: 0x0000000000040001, RBX: 0x000000000000002c, RCX: 0x7fffffffffffffff, RDX: 0xffffff80f546bd88
RSP: 0xffffff80f546bd30, RBP: 0xffffff80f546bd70, RSI: 0x000000000000002c, RDI: 0xffffff80f546bdb0
R8: 0x000000000000001f, R9: 0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff802a9a6a20, R13: 0x0000000000000001, R14: 0x0000000000000070, R15: 0x0000000000040000
RFL: 0x0000000000010216, RIP: 0xffffff80036102b1, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000040001, Error code: 0x0000000000000000, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff80f546b9d0 : 0xffffff800361d626
0xffffff80f546ba40 : 0xffffff80036b7e95
0xffffff80f546bc10 : 0xffffff80036cd4dd
0xffffff80f546bc30 : 0xffffff80036102b1
0xffffff80f546bd70 : 0xffffff8003620dc4
0xffffff80f546bda0 : 0xffffff800364f0c1
0xffffff80f546bde0 : 0xffffff8003616786
0xffffff80f546be50 : 0xffffff800361831c
0xffffff80f546be90 : 0xffffff8003635a40
0xffffff80f546bed0 : 0xffffff80039556a7
0xffffff80f546bf40 : 0xffffff8003955449
0xffffff80f546bf50 : 0xffffff80039e063a
0xffffff80f546bfb0 : 0xffffff80036cdd23
BSD process name corresponding to current thread: ubd
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide:   �... [Show more]
Read other 15 answers

Why does my ipod turn off when I dim the backlight?

why does my ipod turn off when I dim the backlight?

Probably because you do not have the headphones plugged all the way in. Make sure the plastic on the headphone jack is flush with the body of the Nano.
Incidentally, you are not running iOS 1.x

My Ipodkeeps turning off when i turn it on and it goseto the apple logo

Myapple i pod keeps turning off when im on it and it goseto the apple logo

What computer? What version of OSX is running? Some information other than my car won't start.

Wifi turns off when screen turns off

Hi all. I noticed that my wifi turns off when my screen turns off (to save energy) on my brand new rMBP. The mac isn't asleep, just the screen as I have specified in the settings to turn off but the actual laptop is still on. Well when I move the mouse or press a key, the screen naturally comes on right away but I noticed that wifi turns on and reconnected. So if I was streaming music or something, it would stop and disconnect when the screen goes off. Does this make sense?
How do I disable this? I don't want my wifi to turn off at all when my screen turns off. If I'm downloading/streaming or whatever, I want my connection to remain on. Thoughts?

edit:
i know there's the option "prevent computer sleeping when screen is off" under power adpter, but i would like it done while running battery.
thank you.

Private browsing will not turn off when I press the button or use the hotkey.

When I try to turn off private browsing, using the button and the hotkey, it will not turn off. What is wrong?

Make sure that you not run Firefox in automatic [[Private Browsing]] mode.
You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
To see all History settings, choose: Tools > Options > Privacy, choose the setting '''Firefox will: Use custom settings for history'''
UnCheck: [[ ] "Automatically start Firefox in a private browsing session"
See also [[Private Browsing|#Always_start_Firefox_in_a_private_browsing_session|Always start Firefox in a private browsing session]]

HT201269 I have an IPhone 4 that turns off.When I plug the phone into a outlet, it says to connect to iTunes. But my phone doesn't connect. I need to backup info to sync to a new iPhone. Is there another way to get the info from the old one?

I have an IPhone 4 that turns off on its own. When I plug the phone into an outlet, it says to connect to iTunes. When i connect my phone to itunes, the screen displays the apple icon and doesn't connect to iTunes. I need to backup info on this phone so I can apply my back up to a new iPhone. Is there any another way i can do this? My older phone will not show it's connected to iTunes. I used iCloud on the phone with problems, but I didn't back up all the info thru iCloud. Is there another way to back up?

Sounds like your phone is in recovery mode. In this case, all data on it is gone. There's nothing to back up.

How do I keep iphone from turning off when listening to a streaming radio broadcast

When I listen to a local fm station from their web site, the iPhone keeps turning off and I have to push the middle button to start it again. Is there any way I can prevent this?
Thanks,
--Kenoli

Hmmm. Something is not right, I don't have this problem.
Very few Settings>Safari that should affect this.
Accept cookies?
Cellular on, wifi on
MacBook Pro, Mac OS X (10.8.2) 2.4GHz IntelCore i5 320 HD 8GB RAM ParallelsDesktop8.0 iPhone5_iOS6.0.1

TS4185 camera does not turn off when I turn off facetime

My camera stays on when I turn off facebook on my macbookpro how do I disbale it in facebook so I can use it again for Skype?

Go to Settings > General > Lock / Unlock and turn ON (green).

Music streaming turns off when I turn off TV

I use AppleTV to stream music to my stereo. The device is plugged into TV via HDMI and using the digital out to connect to my amp. Works great when my TV is on and I can listen to my music over my speakers.
Problem is that once I turn TV off, the music stops.
Does AppleTV need to have TV to be on to work as streaming device. Doesn't seem to make sense.
Anyone have a fix for me?

If you have an A/V Receiver (Amp) your Apple TV and TV should both be connected to the Receiver via HDMI. You don't need the optical cable unless you have a very old receiver without HDMI support. This will allow you to use the Apple TV completely independant of the TV.
In any case make sure that on the TV HDMI Control is turned off, so it won't turn off your amp when turning off the TV.

FCP turns off when I turn off frame blending

Hi, I really hope that someone can help with this. I'm running FCP 5.1, 8 GB, 2.66 Ghz. Just starting yesterday, everytime I keyframe a move in the motion tab, as I click to turn off frame blending, FCP quits. No "app unexpectedly quit" warning or anything. Just shuts down. It's pretty annoying when you're on a deadline.
Anybody have any ideas? Please feel free to step up to the plate. Thanks!
mac pro G5 Mac OS X (10.4.8) Big Huevos

Did you do any software updates recently? You should always clone your startup drive when you have a stable OS/Application combo. This way you can restore your system to it's previous state quickly.
Have you repaired permissions?

My MacBook Pro screen turns off when I open the lid!

This has been driving me nuts, and also apparently Apple as well.
When my MacBook Pro is connected to a power adapter, if I close the lid it sleeps like a good little Mac. When I open the lid, the display comes on instantly. Then after about a second, it goes black. The LED backlight turns off. I can get it to come on using either of two ways: 1) touch either of the brightness buttons, or 2) remove and replace the power connector.
Now, here is the weird part: it only seems to do it when I am logged in as me. If I login as guest, it doesn't happen. That would seem to imply it is something about my profile that causes it to happen. So I whacked ~/Library/Preferences and it still happened. So where is this particular bit of nastiness hiding?

OK, so I think I solved my issue. It was caused by the system not going to sleep (The screensaver thing was a dead end).
When I ran the console app pmset, I got something like this:
➜ ~ pmset -g assertions
12-06-29 9:11:06 AM EDT
Assertion status system-wide:
   PreventUserIdleDisplaySleep             0
   CPUBoundAssertion                       0
   DisableInflow                           0
   ChargeInhibit                           0
   PreventSystemSleep                      1
   PreventUserIdleSystemSleep              0
   ExternalMedia                           0
   DisableLowPowerBatteryWarnings          0
   EnableIdleSleep                         1
   NoRealPowerSources_debug                0
   UserIsActive                            0
   ApplePushServiceTask                    0
The process that was causing PreventSystemSleep to be 1 was "org.cups.cupsd" which is the print service. So I checked all my printers, one of them was "In Use". When I opened it, there weren't any jobs listed. I went through the options and selected Jobs > Show Everyone's Jobs and sure enough there was a job there. I deleted it and everything seems to work now.
The odd thing is that print job was probably from my other account which didn't seem to have this screen problem. Anyway, I hope this helps anyone out there....

Suddenly turn off when I open the premiere pro cc 2014

when I open the program just he let me chose the project and after that directly turn off itself.
any Help????????
important
12 G DD Ram
i7
1G display card

Moving to Premiere Pro forum
More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

Powerbook turns off when I unplugged the Power Adapter

I month or so ago I noticed that when I unplug my power adapter it turns off instead of running off the battery. I've tried resetting the PMU but I didn't work. Does anyone have any advice or does anyone know what could be the problem.

I am experiencing a similar problem to Blaise. I have owned my 15-inch Dual-Layer SuperDrive for a total of 4 days. Last night I went to move my computer from the living room (where it was plugged into the wall for approx. 5hrs) to my bedroom. So I simply pulled out the power cable and the screen went blank. At first I thought it went to sleep (which was weird even if that was true), but then I tried to wake it up. Nothing worked. So I moved it into the bedroom, plugged it in, then I basically had to power it up as if it was off. Although, since it is the new PowerBook it was still able to write the contents of RAM to the hard drive (which is a really cool new feature). So the dimmed screen had the progress bar on the bottom as the previous settings were loaded.
Anyway, my long story aside. The battery level monitor in the menu bar, now says 0%, when I unplugged it, it said 99%. The green indicators on the battery itself all light up as if it is fully charged. I also looked in system profiler, where it says the capacity is 0mAh and the total charge is 0mAh. Then I ran apple hardware test, where it told me that no battery was present but it was still able to say it experienced "10 cycles".
I have tried to reset the PMU and the PRAM, no help. I've restarted to see if it would luckily rerecognize it. But nothing has worked.
I will be venturing to the Apple Store this afternoon. I hope it is an easy fix, i.e. just a new battery. Basically the current condition of my computer, is that I need to be plugged in to use it at all.
It must be reiterated that this is a brand new machine. And the battery capacity just hours before this incident was 3639mAh (I've been checking it periodically since I got the machine to see how the battery was doing on the first couple of cycles). And it had only experienced 10 charge-drain cycles.
If anyone has any ideas to fix this, I would greatly appreciate the help.

HT1807 My iPhone turns off when I turn the GSM radio on.

Similar Messages

Maybe you are looking for