HT1819 My podcast feed has not updated in a few days days. I add content daily but feed not updating
Feed not updating
It would be a good idea if you can post the Feed URL or the show title so people in the community can check and help out.
Similar Messages
-
i updated my mac which is an O X LION .7 but after the update has completed the mac rebooted itself and never stop booting
flamebliss wrote:
yes wen i try booting in Safe Mode it behave the same. i have downloaded the combo update of 10.7.5 from another laptop, so how do i run it on my mac. THANKS for helping
The goal is to mount the combo update .dmg on the desktop and then open and run it. If you can't get to the desktop to begin with, that won't work. Another approach is to treat the Mac's hard disk as just another HD by using a second Mac and then connecting the problematic one via Target Disk Mode. See http://support.apple.com/kb/ht1661. Note that both Macs will need Firewire ports and you'll need a FIrewire cable to connect them. With the combo updater, one of the steps in the process is to select the drive you want to install the update on. Once you're successfully connected in Target Disk Mode, the problematic drive should appear in the list.
If that doesn't work or Target Disk Mode isn't possible, the only other solution is to boot into Recovery Mode; see http://support.apple.com/kb/ht4718. Note that once booted into recovery mode, you have access to Disk Utility, and you should try running Repair Disk after selecting the bad drive to see if something's wrong with the directory which could be fixed. When you select that drive, you should also look at S.M.A.R.T. Status at the bottom of the window. It should say "Verified." If it says Failing or Failed, the HD needs to be replaced.
If the HD is OK, all that's left that I can think of is to reinstall Lion using Recovery Mode. I hope you've maintained current backups or at least complete Time Machine backups. Of course, if you have a backup and the backup is bootable, you could boot from that, wipe the internal HD clean, and clone the backup onto the internal HD. -
I do not understand how to correct this malfunction.
Operating on MacBook Pro using Mac OSX 10.6.8. Firefox 5 updated - now it does not function - just a blank window. Pull down menus appear but do not function. Am I missing an obvious point to allow this browser to function?I suspect it has something to do with the java but not sure
Just so you'll know, there is no Java on that page. There is, however JavaScript. You should know that those two things are different as night and day.
To fix your problem, change this -
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
</script>
</head>
to this -
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
-->
</script>
</head> -
Wont let me update or download free apps says i need payment verification but im not buying anything
wont let me update or download free apps says i need payment verification but im not buying anything
Howdy Irishinked,
Thanks for using the Apple Support Communities.
If you're being prompted that your payment information needs to be veriefied, then there is some aspect of your payment type which is being denied by your financial institution. I'd like you to please follow the steps below to verify your information.
Open iTunes. If you are signed in to iTunes, skip to step 4.
Note: Verify that you are signed in to the correct iTunes account. If you are unsure which account you're signed into, choose Store > Sign Out and proceed to step 2.
Choose Store > Sign In.
Enter your account name and password, then click the Sign In button.
Choose Store > View My Account.
Click the Edit Payment Information button.
In the Payment Method section, choose None.
Click the Done button at the bottom of the page.
Click the Edit Payment Information button again.
Enter your billing address exactly as it appears on your credit card statement.
Select your credit card type in the Payment Method section.
Enter your credit card information, your card's security code, and the expiration date.
Click the Done button at the bottom of the page.
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorizations have the correct information on file.
iTunes Store: My credit card's security code or zip code does not match my bank's records - Apple Support
Have a good one,
Alex H. -
I was trying to update my ipod for ios 6. It got downloaded but could not update my ipod. my ipod screen is now showing one message usb -up arrow-itunes, can anyone suggest something please.
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
i have laptop with digital persona (finger scanning) to automatic feed the passwords. it was working properly with the older version of firefox but is not working with the latest version of the firefox. why? give me a solution.
Please authorize ADE 3 with same credentials that you used with older version of ADE
-
My iphone will not sync to itunes. It will connect to the computer but will not show up anywhere in itunes. PLEASE HELP!!
Hey there Kellee,
It sounds like the device drivers for your iPhone are working in Windows, but the phone is not showing in iTunes. You should be able to get that showing again with the steps in this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Start with these three steps, and there are more in the article if you need them.
1. Update iTunes
Check that you have the latest version of iTunes installed on your computer. In iTunes, select "Check for updates" in the Help menu.
2. Check the USB cable
Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
USB cables that are bundled with third-party products or accessories might support only charging those products (and not transmitting data) or they might work only with the product with which they were sold. Using one of these cables to sync could cause issues. If you are using a third-party case, such as an extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
3. Verify that Apple Mobile Device Support is installed
iOS devices require Apple Mobile Device Support, which should be automatically installed with iTunes. To verify whether it is installed, follow the steps appropriate for your Windows operating system below.
Windows XP: Click Start and choose Control Panel. Open the "Add or Remove Programs" control panel and verify that Apple Mobile Device Support is visible in the list of currently installed programs.
Windows Vista and Windows 7: Click Start and choose Control Panel. Click "Uninstall a program" (or if using Windows Vista's Classic View of the Control Panel, click "Programs and Features"). Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
Windows 8: Move the cursor to the upper right corner, click the magnifying glass, type Control Panel,and press Return. Click "Uninstall a program". Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
If Apple Mobile Device Support is not listed, remove iTunes, QuickTime, Apple Software Update, Apple Application Support, and then reinstall iTunes. Follow the steps appropriate for your Windows operating system below:
Reinstall iTunes for Windows XP
Reinstall iTunes for Windows Vista, Windows 7, or Windows 8
If after reinstalling iTunes Apple Mobile Device Support is still not installed, follow steps in Trouble installing iTunes or QuickTime for Windows.
Thank you for using Apple Support Communities.
Regards,
Sterling -
i have ip 3gs and ios 4.1 i want to upgrade it to download latest version of apps ,which ios will be compatible and is there any danger to update ios before i erased all settings and content and i tried to update but it failed .it is working properly but i want to update from itunes.iwill do back up but is there any other thing i will face after updating like it will jut show apple loge and will not work. please answer quickly
An iPhone 3GS is too old to update to the very latest iOS and you will never be able to use apps that are compatible. The phone is just too old now in technology terms and the app makers have all moved on, so it's time to get a new phone.
Ideally, perhaps get an iPhone 4s or if you can afford it, an iPhone 5s or 5c which are the newest models. -
Was able to bluetooth one time to play scrabble on our two iPad 1's, but have not been able to do so again. Both are searchable, but are not able to find each other. Any help will be appreciated. Thanks.
Both need to be in the lobby, and searchable at the same time. Also, if either has been paired with a keyboard or headphone since you played, go into settings, and make sure those devices are unpaired, and not interfering with the process.
-
How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.
Ok, if other devices are connecting but just not your MacBook then let's start troubleshooting the MacBook to possibly find out why.
Please try each of the following, in order, until hopefully resolved:
Note the following are excerpts from an OS X Daily article.
* Turn Airport on & off – You can do this via the Airport menu bar or from the Network Preferences. This is the first thing you should try when troubleshooting Mac wireless problems.
* Make sure Wireless/Airport card software & firmware is up to date – This is usually done just by going to the Software Update menu, if there are any updates available for your Mac or Airport, install them.
* Delete and recreate connection – Try deleting and recreating/reestablishing the wireless connection, sometimes a setting can be corrupted and this may fix it.
* Create a new Network Location – Similar to the above suggestion, try creating a new and different wireless network location to see if it resolves the connection problems.
* Change DHCP auto settings to manual – sometimes there is a problem with the DHCP server, and if you manually set an IP address on the network you can be fine. Remember to set the IP to a high number so it wouldn’t interfere with other DHCP machines. As long as you have the subnet mask, router, and DNS settings configured manually as well, this shouldn’t be a problem.
* Flush the DNS cache – Launch the Terminal and enter the following command onto one full line within the Terminal: dscacheutil -flushcache
* Zap the PRAM – Reboot your Mac and hold Command+Option+P+R during restart until you hear another chime, let the Mac boot as usual.
* Delete Wireless Config files – Delete com.apple.internetconfigpriv.plist and com.apple.internetconfig.plist files from ~/Library/Preferences and reboot
* Trash your home directories SystemConfiguration – Remove all files within ~/Library/Preferences/SystemConfiguration/ and then reboot your Mac.
* Reset your Mac’s System Management Controller (SMC) – For MacBook and MacBook Pro’s: Shutdown the MacBook/Pro, remove the battery, disconnect the power, hold the Power Key for 15 seconds. Replace the battery, reconnect power, and zap the PRAM and wait for 2 chimes before letting the keys go. Let boot as usual. -
My iPod nano 6G stop working suddenly; After i reset it and even afetr put it in "stand by" mode by accessing deagnostic mode, it is still not working; Now i can access it sometimes (the main screen), but is not playing and is too slow. How can i fix it
If you do not find a solution in the iPod nano (6th generation) - User Guide, suggest that you call AppleCare if still under warranty or take a trip to your local Apple Store or AASP.
-
My 4s is not picking up phone signal I do not no how to sort this out I have tried resetting it and its not working still I do receive messages and can send them but can not call as it just says call fail
Try resseting the network settings in settings>general then go to reset a the bottom.
Then reset NETWORK settings. -
why my spotlight can not find my personal files ? It can find them before but can not find them now,I want to know why?
From the menu bar, select
▹ System Preferences ▹ Spotlight ▹ Privacy
The list of items excluded from Spotlight indexing is shown (it may be empty.) Click the plus (“+”) icon to add an item to the list. Select your boot volume (under DEVICES) and add it to the list. Then remove it from the list by selecting it and clicking the minus (“-“) icon.
Spotlight will rebuild the index. If you try to do a Spotlight search now from the magnifying-glass icon in the top right corner of the display, a pulsing dot will appear in the icon. When the dot disappears, the indexing is complete. -
Unable to download LR5. Purchased 5 days ago. Serial number available, but download not applicable.
Unable to download LR5. Purchased 5 days ago. Serial number available, but download not applicable it says.
Did you purchase from Adobe directly or from your academic institution? If you purchased from Adobe then the software should be available under your account. Please see http://forums.adobe.com/thread/1006208?tstart=0&promoid=KBHJQ for information on how to download your purchased Adobe software.
If you did not purchase the software from Adobe directly then you can download the trial from https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom&promoid&promoid=D TEML. You can install the trial and then enter the serial number which you have already received. -
backup from an earlier backup not on the list? I backed up at 19.30 but do not appear to find this backup
do you have a more recent backup and that's what it's saying you can restore from? it's possible that backup overwrote your previous one. in itunes on the computer go to edit > preferences > devices, and see what backups you have there
Maybe you are looking for
-
DVD only plays select commercial DVDs
Hey everyone, This is literally the most frustrating thing I have ever dealt with. When I put in a DVD to watch a movie usually the dvd drive with read the disk for awhile and then automatically eject it. However, sometimes with other movies the dvd
-
Will not upgrade mail database....freezes and must force quit
downloaded lion and mail requires upgrade mail database. Freezes and does not upgrade and must force quit. Try again and same thing happens. I can get mail from icloud but not thru mail icon on dock. Help!
-
Entire Backed Up Library UNABLE TO BE READ...
I have a huge problem. I regularly purchased a considerable amount of music from the iTunes store for use as a dj and subsequently backed up my library on DVDs (a little over 100). For some reason about 2 months ago, I was unable to access the music
-
Viewing images and flash in brower
I have create a flash swf file and a background image in photoshop, an I am having a problem viewing either in the browser. The page is blank where the file is suppose to be. I've recently had switched to a different server using http vs htpdocs, the
-
I've an idea for a brush tool that could be very powerful. What I'd like would be to be able to have a tool that combined the effects of several tools at once. How to use this new tool: Oil Paint: A combo- brush that 1st smudges and then allies a typ