HT1923 I tried to install latest version of itunes on my PC and everthing went south. no matter how many times I reinstall it the new version or even an old version I get ERROR 7 (Windows error 126) and then fail to start because MSVCR80.dll is missing. H
I tried to install latest version of itunes on my PC now the program doesn't start at all. I remove and reinstalled the program 5 times and I still get ERROR 7 (Windows 126) and failure to start because MSVCR80.dll is missing. Is there a simple fix?
Click here and follow the instructions.
(98915)
Similar Messages
-
I get an error that states "This application has failed to start because MSVCR80.dll was not found". Reinstalling does not help.I have tried removing iTunes and reinstalling, I have tried "repairing" option at reinstall, nothing seems to work.
Read this:
iTunes 11.1.4 for Windows - Unable to install or open - MSVCR80 issue -
Hi Support,
I am becoming anxious because no matter what I try it doesnt seem to allow me to open itunes.
Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.
I have re-installed, SO many times and I still cant open iTunes.
Please help!!Click here and follow the instructions.
(98888) -
When I reboot my windows desktop i get a message that says apsdaemon.exe can not start because msvcr80.dll is missing. How do i fix this? Thank you in advance.
Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates -
When trying to run itunes on my PC, I get this message. This application has failed to start because MSVCR80.dll was not found. Do you have any clues on a solution?
Welcome to Apple Support Communities
A solution is listed in the thread below.
It probably and other similar discussions appear in the More Like This window to the right of your question. The ones with a green check mark are questioned marked 'answered' by the original poster.
https://discussions.apple.com/message/24610401#24610401 -
I tried to download the latest version of iTunes but failed half way through. It suggested that i reinstall we I tried. However, i now get this message which states "Application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem"
I have tried this but with no success. I have therefore found that I cannot access my iTunes library at all now.
What should I do.Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99792) -
I recently tried to download the latest version of iTunes, but an error occured during the process. It was recommended that i reinstall iTunes to attempt to correct that problem. After I attempted to reinstall, an error came up with the title "iTunes.exe - Unable to locate component." the body of the error message read "This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." When I click "Ok", another error message pops-up reading "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)". I tried reinstalling iTunes 3 times now, each time with the same result. What is going wrong, and what do I need to do?
Kappy, I completely overlooked your original response due to it's small, one line nature and poor UX design of the area surrounding the message area.
Upon following the complete instructions linked from the link you posted (http://support.apple.com/kb/HT1923?viewlocale=en_US&locale=en_US), my first attempt resulted in everything being installed except for iTunes. So trying yet again.
I do have Safari for Windows Vista installed, which is why I could not delete everything in the C:\Program Files\Common Files\Apple\ folder. I'm guessing this is Apple's way of completely removing Safari Win from history (there's always an under-the-table reason when something like this happens with Apple installs, they just won't say it publicly). Uninstalling Safari. Uninstalling Safari removes the remaining "Internet" files from C:\Program Files\Common Files\Apple\
Uninstalling iCloud. Uninstalling MobileMe Control Panel that was never used. That leaves only QuickTime installed as an Apple product on my machine.
Just for the record, I did not have this folder: C:\Program Files\iPod\
Emptied the Recycling Bin.
Shut down and fresh start-up.
Install attempt again: results in the installer saying something interrupted it (no other programs open)
Installing again immediately after error: Success
Clearly there are issues with this installer.
A pop-up shows up with "The registry settings used by the iTunes drives for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burining software. Please reinstall iTunes"
No other CD burning software installed other than what came pre-installed by Gateway and a install of Windows Vista Pro (or whatever the top expensive one was called).
iTunes launched. iTunes Library, items like Movies & Music, and playlists are still intact and usable.
Good thing I don't have these issues on my Macs (ahem, which is why these errors are allowed to persist by Apple to discourage Microsoft/Windows/PC use and purchase, all about the money and Apple has become the non-caring giant it once sought to overthrow as the underdog, miss those days).
Thanks Kappy. Thanks for the time suck Apple. -
trying to install the newest version of itunes on my pc and am getting "program cant start because msvcr80.dll is missing from your computer" reinstalling doesnt work. and then it says error 7 (windows error 126). Any help would be appreciated. Using Windows 7 enterprise on an hp Z600
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
After an iTunes update failed to install, iTunes won't open and I get the following two windows. Program can't start because MSVCR80.dll is missing from your computer, and iTunes not installed correctly. Please reinstall iTunes. Error 7 (windows error 126) When I reinstall I get the same messages and ITunes won't open.
Click here and follow the instructions.
(98815) -
I have just updated itunes on my pc (windows XP) to the latest version. When I try to open it I get an error message saying the application failed to start because MSVCR80.dll was not found< Have tried reinstalling with no luck. Any ideas?
try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install. -
I am having trouble reinstalling my Itunes on my desktop which uses Windows 7 and I can download it but once it's complete i keep getting this error message...The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. Please help me.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
When I try to start iTunes, I get the message "program can't start because MSVCR80.dll is missing from your computper. Try reinstalling the program." When I try reinstalling, I get the message Error 7 (Windows Error 126)
Can you help me?????Hello Charleen,
It sounds like you are unable to reinstall iTunes because of this error message 7. I recommend the troublehsooting found in the following article that mentions that error named:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thank you for using Apple Support Communities.
Take care,
Sterling -
My itunes won't open - it says: 'The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem' I have tried un-installing then re-installing itunes and I still get the same message?? Can anyone help?
I have the exact same problem.
I have uninstalled the program, rebooted and downloaded the update again. Same problem, same message.
Please, where is that missing MSVCR80.dll? I don't remember misplacing it.
I'm a Windows 7 user. -
try to open itunes on my computer and get messageprogram can't start because MSVCR80.dll is missing from computer and a windows error 126 comes up
Hi arw8669,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden -
After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found. how do I get Itunes to start working again?
See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562
Maybe you are looking for
-
80,000 photos - Is it time to leave iPhoto?
I have over 80,000 photos in iPhoto on 4 computers and 2 or 3 externals, most are organized into events or albums, lots of duplicates, a lot of edited photos. I really need to combine all the libraries, sort out all the duplicates, but also keep thin
-
I keep having my screen go black and then Win 7 pro gives me this error: "Display driver NVIDIA Windows Kernel Mode Driver, Version 188.80 stopped responding and successfully recovered." everything is fine after that. happens 3 or 4 times a day. '''d
-
Default Profit Center to Customer Account.
Dear Friends, We have posted an FI Document using T.code FB70. After the document in posted, I have checked in T.code FB03. For Customer Account, Profit Center is defaulted . EX: for Customer Account is 40, Profit center 99,0000 is defaulted. Why thi
-
DSN not found error and no default driver specified....plz help me
am doing my project in jsp. using tomcat. am connecting the database using access. it cause the error like " DSN not found error" am verified so many times the data source name as well as data base connection. but not to be clear the error. am also t
-
N80 Bluetooth issue still unresolved : WORST NOKIA...
I am tired of Nokia N80 problems. I was one of the first buyers. ( early buyer = alfatester) After two firmware upgrades and three months bluetooth connection is still absolutely unreliable. Soon this phone will be out of date. Waste of my good money