HT1926 How do I solve the for the itunes Install encountering "unexpected errors" and won't complete

Every time I try to insatll iTunes it fails at the very end with the error in the subject line. No other explanation is given.

Here is the dialogue diplayed at the end of installation. Thanks for any ideas or assistance you can provide.

Similar Messages

Since the iTunes update to 10.6 everytime I open iTunes there is an error message that says that iTunes has encountered an error and needs to shut down. Is there a way to fix this or go back to an older version of iTunes?

Ever since the update, when I load iTunes it encounters an error and force closes. I have uninstalled and reinstalled everything Apple twice and that hasn't fixed the issue. Is there a way to go back to an older version of iTunes?

http://support.apple.com/kb/TS3694
http://support.apple.com/kb/TS3125
http://support.microsoft.com/kb/299357

Won't turn on - initially saw the connect to itunes screen then went black and won't do anything

Charged IPad all morning - saw the screen that says to connect to ITunes - Once it reached full charge, screen went black and nothing works -

I have tried every reset tip on-line - Hold home and power for 10 secs, 15 secs, alternate, etc. Any other suggestions?

I cannot "download all" from the cloud ... it says that itunes has encountered an error and needs to shut down. I can download one song at a time. It is not being caused by any one song.

I have the latest version of iTunes. When I am in the iTunes store and I click on purchased it will show me a list of all my purchased songs. Some of the older songs are already in my iTunes account. There is a cloud symbol by any songs that have not been download to my account. It always fails if I try to do a "download all" (at the bottom of the page) but I seem to be able to download one song at a time. These are songs that were purchased on my iPhone but I wanted to put them in my iTunes account so that I could put them on my iPod. The problem does not appear to be associated to any one song.

I did think about that and if I have to I will do that, however there are about 50 songs. I have closed and reopened iTunes several times and I am sure that I have the latest version. It fails right away but I can click on the cloud download icon and download the song that it failed on ... therefore it is not that song "or any one song" causing the issue. Any ideas?

Filter encountered an error and could not complete the translation

This just popped up. Worked fine on Friday and nothing has changed.
Running FrameMaker8 on Vista.
I try to open a word doc and this message popped up. I assumed it was the word doc.
I try to open another word doc, from a different source and I get this message again.
So I try to open a word doc that I've already opened and have typeset and saved in Frame with no problem, and I get the error again.
I go to a different machine, running plain 'ol Windows, and try to open the docs in Frame 7. Again, a filter error.
I change from Structured mode to regular Frame and I still get the error.
I don't even know where to start looking. Frame 7 has been on my desktop (my backup machine) since it was released and the error is occuring with files I've already opened and worked with.
Frame 8 on my notebook worked fine on Friday.
Where do I start? Two different machines. Two different OS. Two different versions of Frame. Docs from different sources that had worked no longer open.

On Mon, 24 Nov 2008 12:10:08 -0800, [email protected]
wrote:
>This just popped up. Worked fine on Friday and nothing has changed.
>
>Running FrameMaker8 on Vista.
>
>I try to open a word doc and this message popped up. I assumed it was the word doc.
>
>I try to open another word doc, from a different source and I get this message again.
>
>So I try to open a word doc that I've already opened and have typeset and saved in Frame with no problem, and I get the error again.
>
>I go to a different machine, running plain 'ol Windows, and try to open the docs in Frame 7. Again, a filter error.
>
>I change from Structured mode to regular Frame and I still get the error.
>
>I don't even know where to start looking. Frame 7 has been on my desktop (my backup machine) since it was released and the error is occuring with files I've already opened and worked with.
>
>Frame 8 on my notebook worked fine on Friday.
>
>Where do I start? Two different machines. Two different OS. Two different versions of Frame. Docs from different sources that had worked no longer open.
Dottie,
I have the same problems with Framemaker 8 with the latest Patches.
It was suggested that I use the Japanese RTF translation forWord RTF
files. THIS WORKS!
I have found that i need to go back and change the special characters
that correspond to " and un-". They look like the character i in a
special format.
If you find out what caused the change, please let me know.
Regards,
Ed Feustel

Re: how do I solve this alert-The photo "evaluation.jpeg" could not be opened, because the original item cannot be found.

Re: how do I solve this alert-The photo “evaluation.jpeg” could not be opened, because the original item cannot be found. How do I get rid of the alert so that every time I open iphoto or sync my iphone it will not come up anymore.
Thanks

The issue is with iPhoto. When it opens it is looking for a photo that either no longer exists or is misplaced. I would post I the iPhoto forum where those experts are.

How do I solve this alert-The photo "evaluation.jpeg" could not be opened, because the original item cannot be found.

it happened when I did an update on the iphoto
how do I solve this
alert-The photo “evaluation.jpeg” could not be opened, because the original item cannot be found.

The issue is with iPhoto. When it opens it is looking for a photo that either no longer exists or is misplaced. I would post I the iPhoto forum where those experts are.

How to get Open Balance for the year and Total Ending Balance?

For a given account, how to get Open Balance for the year (Cumulative Ending Balance) and Total Ending Balance (Cumulative Ending Balance)?
Is there any function module available? or should I read from some tables? Please advice.

Hello Paul,
You could try calling one of the following BAPIs - see which one meets your requirement. They are documented well so shouldn't be a problem finding out the correct one for your requirements.
BAPI_GL_GETGLACCBALANCE
BAPI_GL_GETGLACCCURRENTBALANCE
BAPI_GL_ACC_GETBALANCE
BAPI_GL_ACC_GETCURRENTBALANCE
BAPI_GL_ACC_GETPERIODBALANCES
BAPI_COND_VAL_DECRE_BALANCES
You might have to put in some of your own logic after the BAPI call to get what you want.
Hope this helps,
Cheers,
Sougata.
p.s. Also look at FM FAGL_GET_ACCOUNT_BALANCE
Edited by: Sougata Chatterjee on May 7, 2008 11:47 AM

How to find workarea ID for the work area name.

Hi Experts..
How to find workarea ID for the work area name.(Work area name CCIHT_WAH-WAID and I want to fetch characteristic data from table AUSP matching the OBJEK field,but I only have Work area name).Can anybody help me to find tables or relationship between Workarea ID and Workarea name for the same.I am using TCODE - CHIB02.Once I select a workarea and click on IHS Data button,I get data for that workarea.I need to find where this data comes from and How is this fetched.
Points would be rewarded for helpful answers..
Thanks
Kunal Halarnakar

U want to fetch the workarea description ?
we can fetch it from CCIHT_WALD table with the RECN value.
The informations are stored in AUSP table with the characterstic(ATINN) value.

How can i use AME for the new OAF page.

Dear all,
I have developed a new OAF page and registered under Employee Self Service.
How can i use AME for the approval process.
Appreciate your ideas?
zamora

I will try to answer based on my experience of working with iProcurement and AME. It depends on how you want to make a call to AME , directly from OAF Page or from Workflow and your requirement. You didn't specify what you want to show the users on OAF Page and your business requirement.
Before calling AME Engine from the OAF page or workflow, I guess you did already setup AME Transaction Type and it's Approval Groups, Conditions, Action Types and Rules. Do some testing from AME Business Analyst Test Workbench. Please note that, AME provides lot of PL/SQL API's that you have to call from your programs (java or workflow pl/sql)
Let's look at the workflow and putting an OAF Page as notification.
As Sameer said, you have kick-off workflow process from PR of CO and with in the workflow function, you make a call to AME Engine API's with the AME Transaction ID. This transactionId belongs to the AME Transsaction Type that you setup. Based on the rules setup, AME Engine generates list of approvers/approver and stores them AME Tables for that transactionId. Then, it sends a notification to the approver.
In the workflow, where that notification is defined, in the message body you have to put an attribute(&XX_WF_FWK_RN) of type document/send. And this attribute will have the constant JSP:/OA_HTML/OA.jsp?OAFunc=XX_FUNC&paramId=-&DOCUMENT_ID-. This function is SSWA Jsp function that makes a web html call to your OAF Region.
If your requirement is to just show the list of approvers on the OAF Page, you may have to call AME API diectly passing your AME TrasnactionId with other parameters. Then AME generates list of approvers and stores them in AME tables with each approver status. You can pickup those approvers using VO and show them on OAF Page.
Hope this gives some idea.

I have an apple ID for the South African iTunes store how do I get one for the US store?, I have an apple ID for the South African iTunes store how do I get one for the US store?

I have an apple ID for the South african i Tunes store. How do I get one for the US one? I want to use Mind Snacks.

You will need a valid billing address in the US and be in the US when you want to buy anything from it. You can try requesting that it be added to the South African, but ultimately it's the app's developer that will have to grant Apple a licence to sell it there : http://www.apple.com/feedback/itunes.html

How do you get apps for the 1st generation iPod touch

How do I get apps for the 1st generation iPod touch?

By updating the iOS on the iPOd. The 1G can go as high as 3.1.3. That works with a lot of apps. But some apps require a higher iOS and/or newer iPod.
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

How to create a validation for the project coding mask

Hi,
Would just like to ask how to create a validation for the project coding mask wherein the WBS elements hierarchy will be checked against the template saved. For example,
project coding mask is XXXX-XXXXX-XX-X-X-X-00-X
mother WBS should be XXXX-XXXXX-X and lower level WBS would be XXXX-XXXXX-XX.
The validation should not allow a mother WBS to be XXXX-XXXXX-XX.
How can we go about this?

Hi Jacquiline Bersamin,
You can use validation with the combination of the level and the coding mask.
In the validation:
Pre requisite: WBS level = 1
Validation: Prps-posid = prps-posid :1-12:
Message : Error
If required you can give the parameters for your detail error message.
Please let me know if this does not work.
Thanks
Regards
Srinivasan Desingh

How to create a password for the pdf file

In Adore Acrobat XI, how to create a password for the file? The help states going to Tools Menu and clicking on Protection tab - but there is no such option. In the file - properties - security screen, it shows the security details but does not allow to edit it.

I think you may be mixing up two different products: Adobe Reader (free), and Acrobat ($$).

How to create a playlist for the movies I have?

Hope someone can help me here. How do you set the movies to play continuously? I can't seem to create a playlist for the movies. You can create playlist for podcast videos and musics but how do you creat playlist for the 3 movies I have got on my iphone?
Any help will be greatly appreciated.

Not exactly true. As absurd as it sounds, if you have just one music track in your playlist, then you can select it from the Playlists section on the iPhone and play your videos, movies etc. one after the other.
I have created a completely empty music track in Garageband which I drag onto the end of each and every video playlist I create. An ugly solution, but it works.
You have to remember to check the playlist in both the Video and Music sections in iTunes->Devices->Your iPhone.

HT1926 How do I solve the for the itunes Install encountering "unexpected errors" and won't complete

Similar Messages

Maybe you are looking for