HT1926 Trying to download itunes update on my computer windows Xp... Tried 3 times and keep getting an error: invalid signature/will not be installed. HELP

iTunes is downloaded, been using it for years.  I went to download an update and I keep getting an error.Error message is: invalid signature/will not install.
I did try to update manually as instructed however that also came with the same error.
If someone can advise it would be greatly appreciated.
So what is an invalid signature and how to fix it???

I would think the link doesn't work now as we are on version 10.7.
If you go to:
http://support.apple.com/downloads
the latest update for itunes is in the left hand column.  If you follow the rest of the instructions from wiclee/fimeck it should work.
"Select "Save" instead of "Run". Once downloaded, right click the iTunesSetup.exe or iTunesSetup64.exe and select 'Run as Administrator' to install."  (or use default)

Similar Messages

  • Trying to download the free trial of Adobe Acrobat XL Pro.  I keep getting the message "The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author."  I've repeatedly tried g

    Trying to download the free trial of Adobe Acrobat XL Pro.  I keep getting the message "The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author."  I've repeatedly tried getting a new installer file, but get the same message every time.

    K_don52 and Ande8135 please remove your current installation of the Adobe Download Assistant and reinstall.  You can find more details in the known issues section of Troubleshoot Adobe Download Assistant.

  • Running xp, when i try to upgrade itunes from 11.0,0,163 to 11.0.4 it says itumes has invalid signature, will not be installed

    i'm running xp - when i try to upgrade itumes, my computer says itunes has an invalid signature - try manual - so i do and get the same message - i know i've upgraded itunes before successfully - what does this mean?

    Hi curliejo, 
    Welcome to the Apple Support Communities!
    In your situation I would recommend the steps in the following article for troubleshooting iTunes. It may be necessary to completely remove and reinstall iTunes in this situation. Be sure to remove all of the components with iTunes in the correct order as outlined in the article before installing fresh. 
    Issues installing iTunes or QuickTime for Windows
    Have a great day, 
    Joe

  • Am trying to update to 5.0 from 4.2.1 and keep getting an error message "There was a problem downloading for iphone.  The network timed out.  What do I do ?

    Am trying to update to 5.0 from 4.2.1 and keep getting an error message "There was a problem downloading for iphone.  The network timed out.  What do I do ?

    This is asked and answered many times each day.  The forum search bar is on the right side of this page.
    Disable your firewall/security software and try again.

  • HT1222 This will not download on my iPad, I've tried several times and keep getting an error

    http://support.apple.com/kb/HT1222
    This update will not download on my iPad I've tried it several times and keep getting an error message

    The links that you posted describes Apple security updates. What exactly are you trying to download and what error message are you getting?
    If you are trying to update the iPad and you are usingn iTunes, disable your antivirus software and turn off your firewall.

  • Trying to install itunes on win 8.1.  keep getting error apple application support not found.  asks me to uninstall and install itunes.  i tried several times and keep getting same error.

    trying to install itunes on win 8.1.  keep getting error apple application support not found.  asks me to uninstall and install itunes.  i tried several times and keep getting same error.

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, see if iTunes will launch without the error now.
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Im trying to upgrade iTunes to v 10.6 on a windows vista pc and keep getting the error, "Invalid Drive /E".  What do I do to get past this?

    I'm trying to upgrade to iTunes v 10.6 on a windows vista pc and keep getting the error, "Invalid Drive/E".  What do I do to get past this?

    Open a Windows Command prompt, e.g. Hit Start > Run, type in CMD and press OK.
    Type in SUBST E: C:\<enter>
    This will map E: to C: until the machine is restarted or you enter SUBST E: /D at the command prompt. Now you can try uninstalling or upgrading the software again.
    (If upgrading software which lets you choose a location, install the software in the default location, not on the E:\ drive.)
    See here for more info.
    tt2

  • I am trying to re load itunes onto a Compaq (Windows Vista) laptop. I keep getting an error message "Runtime error! Program: C\Program files|itunes|itunes.exe. R6034. An application has made an attempt to load the C runtime library inccorectly." Help!

    I am trying to re load itunes on to a Compaq (Windows Vista) laptop. I keep getting an error message "Run time error!. Program C:\Program files\itunes\itunes.exe. R6034. An application has made an attempt to load the C runtime library incorrectly" What can I do?

    Hello, Max230506. 
    Thank you for visiting Apple Support Communities.
    Here are the steps I would recommend going through as they should resolve the issue.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    Jason H.

  • I am trying to download my photos into I photo with my new Nikon S6300 camera and keep getting the message  The file could not be imported the file is unrecognizable format had no problems with my Canon camera

    Trying to download my pictures to IPhoto with my new Nikon S6300 camera keep getting the message the file could not be imported as the file is unreconizable format. I had no problem with my old Canon camera. Please help

    I am having the same problem which has happened very infrequently before. Generally it's one photo and happened when my battery died.
    However today I tried to download six photos.
    None would download including several others for a total of 21 that would not download.
    Since I had just installed a new powered hub and added three new external 4T hard drives, I got concerned that it was the hub. Then got really worried that I'd have problems with the data I have been backing up.
    However following this sequence of events, I've determined it's not the hub, but still don't know what is causing the problem.
    (1) Put a fresh battery in the camera - same results
    (1.5) Used a different port in the new hub - same results
    (2) Put the card in the card slot in the back of my iMac - no problems except that one image I knew about last week. The six new images imported.
    (3) Tried again using the cable - still same error
    (4) Changed cables - my husband has the same camera - still same error
    (4) Put the card in his camera with his cable - still same error
    (5) Put the card in a card reader and used the same slot in the new hub - no problems - same one wouldn't import but message that there are no new photos to import.
    (6) Moved the offending one image to the Trash while the card was in the card reader
    (7) Put the card back into my camera and used my cable. iPhoto had no error and displayed the message there are no new photos.
    Conclusion:
    Not the camera
    Not the cable
    Not the hub
    Must remove bad photo from the card
    However, I have not had to do that before. I went through several imports on vacation when there was one bad image and just ignored it each time.
    Any idea why this is happening now?
    Thank you

  • HT1926 Tried to download itunes update 11.1.4. At 99% IE said, "This program contained a virus and was deleted."  Anyone else with this problem?  What do I do?

    Tried to download itunes update 11.1.4. At 99% IE said, "This program contained a virus and was deleted."  Anyone else with this problem?  What do I do?

    Hi JEOQ,
    Thanks for visiting Apple Support Communities.
    You may find the information and steps in this article helpful with downloading iTunes:
    iTunes: Downloading iTunes for Windows using Internet Explorer
    http://support.apple.com/kb/ts3212
    Best Regards,
    Jeremy

  • TS3258 I get error message -42408 when trying to download itunes update 11.0.2 and thus can not upgrade to latest version.  What should I do?

    I get error message -42408 when trying to download itunes update 11.0.2 and I therefore can not update to that latest version.  What can I do?

    Hey there davidgor2!
    I have found an article that should help you resolve this issue with updating your iTunes. The article can be found here:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    and the specific part of the article you will want to look at first is right here:
    "Error 42023" through "Error 42408"
    These alerts might occur when trying to authorize iTunes or during launch when iTunes checks for authorization information.
    Install the latest iTunes from apple.com/itunes/download/
    Remove the SC Info folder.
    If that does not resolve the issue, see iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3.
    Thanks for using the Apple Support Communities!
    Regards,
    Braden

  • I'm trying to download some purchased TV shows to my iPad Air.  I keep getting the dreaded Download Error Tap to Retry Message.  I've signed out of iTunes and back in.  I've updated my software.  I have plenty of room for them on the Air.  Help?

    I'm trying to download some purchased TV shows to my iPad Air.  I keep getting the dreaded Download Error Tap to Retry Message.  I've signed out of iTunes and back in.  I've updated my software.  I have plenty of room for them on the Air.  We are taking a long flight this week, and I wanted to have something new to watch.  I've read through lots of threads on this but I can't seem to find a good solution that I haven't tried.
    If I can get them to download them on my iMac computer, can I then transfer them to my iPad?  How is this done?  (Please pardon an older lady's ignorance, and thank you for any assistance!)
    Jody

    Hello jody5758
    Continue your troubleshooting with the article below. IT will walk you through checking the Date & Time as well as checking the settings of your router to ensure a proper connection.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Regards,
    -Norm G.

  • HT1222 I tried to download Itunes update 11.1.4 to my windows xp desktop computer. Somehow, It was not succesful. Now , I cannot open Itunes. It gives error message of R6034-runtime error. How can I resolve it?

    Hi,
    I tried to download Itunes update 11.1.4 to my windows xp desktop computer. Somehow, It was not succesful. Now , I cannot open Itunes. It gives error message of R6034-runtime error. How can I resolve it?

    Click here and follow the instructions.
    (99025)

  • Repeated failures trying to download iTunes update 10.5.1.42 for WinXP

    I have failed 4-times trying to download iTunes update 10.5.1.42 for WinXp. What is causing the installer failure? I have maintained the Windows XP system files and Windows Installer, along with iTunes versions until now.  The install process message says "THERE IS A PROBLEM WITH THE Windows Installer Package. A PROGRAM RUN AS PART OF THE SETUP DID NOT FINISH AS EXPECTED. CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR."
    This is the first time I have had a problem updating iTunes on my XP desktop. 

    After reviewing other Download related problems, one reply suggested using the REPAIR feature from Window Control Panel, list of Software Installed.  I repaired 3 Apple software files and iTunes main file. Took about 10-12 minutes. Then reran "Check for updates" from iTunes/Help menu. Surprised to find 1 program listed that didn't popup "before" I repaired the Apple files.  New version of APPLE SOFTWARE UPDATE 2.1.3.127.  Tryed to install but it hung up/stalled. Then tried again only used the DOWNLOAD option instead of install option. Then Manually "Ran" that file from my Apple/Apple Software Update folder.  filenamed "APPLESOFTWAREUPDATE, type "Windows Installer Package" from Apple. It worked!! 
    Then Checked for updates from iTunes/Help, surprised to see (4) new files available. Safari 5.1.1; Mobile Control Panel 1.6.7; iTunes 10.5.1.42; and Quicktime 7.7.1. Installed all 4 and now iTunes 10.5+ runs great and my iCloud works, letting me catch up Downloads from the Apple/iTunes servers.
    What a pain in the @$#!!!! and it only took 2.5 hours to get it all figured out with 6 total attempts to update to iTunes 10.5.1.42. 
    Ready for double Scotch rocks.....

  • Trying to download ITunes latest version on my Windows XP and I get this message "The installer has insufficient privileges to access this directory: C:\Program Files\ITunes.  The installation cannot continue. HELP!!

    Trying to download ITunes latest version on my Windows XP and I get this message:  "The installer has insufficient privileges to access this directory: C:\Program Files\ITunes.  The installation cannot continue.  Log on as administrator or contact your system administrator."  HELP?

    Hello PamelaFox14,
    Thank you for using Apple Support Communities.
    It sounds like you need to log in as the administrator to update the iTunes application properly.
    Take a look at this article named:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    This section in particular:
    1. Make sure you have administrator account access
    To install iTunes or QuickTime software, you need to be logged in as an administrator on the computer. If you're not sure if you have administrator account access, you may find this Microsoft article helpful:
    Windows 7: How do I log on as an administrator?
    Otherwise, refer to the Help documentation from Microsoft, contact your IT department, or visitsupport.microsoft.com for more information.
    All the best,
    Sterling

Maybe you are looking for

  • Question about partner determination for customer master

    Hi, experts, I have already read the documentation about this topic at forum. Still I have the following question: why should we assign the partner function to the account group? According to my understanding, the partner function has to be assigned

  • How can i output a voltage on PCI-6229 port with visual basic 6 ?

    Hello, PCI-6229 card is using DAQmx, that not support VB 6 officially. However, members of this forum found out a way to write/read on digital port with vb6 and DAQmx. This was working well for me indeed. Then, i wanted to output a voltage on AO. I f

  • Singleton vs. Static

    I'm developing an application and I have read a number of articles on the use of a Singleton vs. a static class (a class with all static members). From my perspective, it seems that it's best to use static classes when you have pure, stateless functi

  • "xdo" failed to preload on startup in Web application: "xmlpserver".

    I have been able to deploy OBIEE onto Weblogic 10.3 however no success in BI publisher 10.1.3.4.0. I'm using JDK 6.14, not JRockIt. I have tried expanding the xmplserver.ear -> xmlpserver.war -> expanded files i have used the following link to deploy

  • Java.lang.ClassCastException ( Nested Table )

    while (rs.next()) { orderNO = rs.getInt(1); java.sql.Struct channelType = (java.sql.Struct)rs.getObject(2); ============> java.lang.ClassCastException During the run time, the above error message occured.. How can deal with this error message? He~~~l