HT1926 when i try to download itunes 11 my computer stops the download and displays the message could not access network location #user profile%\start menu\programs\startup\
when i try to download itunes 11.1 or any updates i get the message could not access network location #user profile%\start menu\programs\startup\. any help
Let's try the fixit from the following Microsoft document with that one:
Fix problems with programs that can't be installed or uninstalled
Similar Messages
-
When i try to install i tunes, it goes so far down the installation process and then comes up with a message ' could not access network location %APPDATA%\. I then retry and it comes up with the same message.
It also tells me i tunes needs 'Quick Time' to support the software. I have downloaded Quicktime from i tunes seperately and gone through the whole process again, only to get the same message.
Can anyone please help?These kind of messages can often be cleared by using the Microsoft Installer cleanup Utility.
Here is a method for cleanup of your old iTunes installation and reinstall.
== uninstall with cleanup ==
Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Save the files on your PC.
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program. The installer doesn't give any message to confirm the installation.
http://support.microsoft.com/kb/290301/
(To run the program – All Programs>>Windows Install)
Now use the following method to remove iTunes and its components:
XP
http://support.apple.com/kb/HT1925
Vista or Win 7
http://support.apple.com/kb/HT1923
*If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
restart your PC
Install the stand alone Quicktime and check that it works.
If it does, install iTunes. -
When trying to install Itunes 10.2 I get an error message "Could not access network location %APPDATA%\." How can I fix this?
With that particular variety of 1606 (it's a 1606 error message even though the 1606 error message number isn't returned by the iTunes installer), the following Microsoft document is worth a try:
You receive an "Error 1606" error message when you try to install or remove a Microsoft program -
Trying to update iTunes on XP. Keep getting message "could not access network location iTunes\."
Any ideas"could not access network location iTunes\."
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Help can't install or uninstall itunes keep getting the message " could not access network location %APPDATA%\, "
And follow this:
http://support.apple.com/kb/HT1925
Apple moved some drivers for 64-bit now to where they should have been.
Quicktime also use to place files outside the norm.
One of the reasons I recommend when it comes to Apple:
Wait for the ".1" and always use the uninstaller first and then install.
That means you may want manual standalone installer instead - and that way you have 10.4.1 in case you need to later downgrade. -
When attempting to install itunes error message could not access network location \. (Windown 7)
When I try installing / updating any apple product I recive the error massage "could not access network location \." I have a windows seven operating system. I am not that computer savy, and dont know what to do. I tried uninstalling my apple products originally on my computer before I started getting the error message, and they all uninstalled besides for bonjour. They will however not reinstall. HELP!!!!
not sure it's the latest version but a simple google search helped me find it for you:
http://www.softpedia.com/get/Security/Secure-cleaning/Windows-Installer-CleanUp- Utility.shtml
anyways, you might want to wait until another user more versed in windows points you in the right direction.
good luck ! -
ITunes will not install, error message "could not access network location"
I just got a new iPod Classic for Christmas but I have an older Mac so I was going to use an extra PC that we have laying around the house but every time I try to install iTunes, I get this Error:
Could not access network location \\S090100\d$\Data.Backup\C09010009-FDR\My Documents\My Pictures\.
It does not have Error 1606 anywhere on it and it asks me if I want to Retry or Cancel. I have tried EVERYTHING, please help!!For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
Cant install itunes on windows xp,i get a message "could not access network location iTunes/.
cannot install itunes after software update on iphone 4s all i keep getting is " could not access network location itunes/.
I have uninstalled and reinstalled many times but i still get the same messageLet's try the fixit from the following Microsoft document with that one:
Fix problems with programs that can't be installed or uninstalled -
please help
With that particular variety of 1606 (it's a 1606 error message even though the 1606 error message number isn't returned by the iTunes installer), the following Microsoft document is worth a try:
You receive an "Error 1606" error message when you try to install or remove a Microsoft program -
How can I get rid of this?
With that particular variety of 1606 (it's a 1606 error message even though the 1606 error message number isn't returned by the iTunes installer), the following Microsoft document is worth a try:
You receive an "Error 1606" error message when you try to install or remove a Microsoft program -
Could not access network location %APPDATA%\ when attempting to install update
Received error message "Could not access network location %APPDATA%\ " when attempting to update itunes and safari on my pc running windows 7 premium home addition. Everything had been working fine. Needed to update becuase Itunes no longer recognized itouch.
With that particular variety of 1606 (it's a 1606 error message even though the 1606 error message number isn't returned by the iTunes installer), the following Microsoft document is worth a try:
You receive an "Error 1606" error message when you try to install or remove a Microsoft program -
i try downloading iTunes then a mesage pops up saying i can't access %APPDATA%
Thsi solved the same error for someone else:
Carolyn Samit San Francisco Bay Area / Hawaii
This helped meRe: Windows 7 error when installing iTunes 'Could not access network location %APPDATA%'
May 2, 2011 2:16 PM (in response to hardly embly)
Try disabling anti virus software and turning off the Firewall
Disable antivirus software
Turn-Windows-Firewall-on-or-off -
i am trying to download itunes on my coumputer and when its done downloading its says could not access network location %APPDATA%/
Let's try the following user tip with that one:
"Could not access network location %APPDATA%" install errors -
When I try to install iTunes.. I get an error saying: "Could not access network location %PUBLIC%\Desktop.. I tried some tutorials on YouTube to try an fix this problem, but none seem to help.. So does anyone have any suggestions on how to fix this? Please help ASAP.
This user tip:
"Could not access network location %PUBLIC%\Desktop\" install errors
Click on the words in the title of the user tip. It's a link to the user tip. -
I keep getting the following message after trying to install iTunes. Please help. could not access network location iTunes\.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?
Maybe you are looking for
-
W520, 55++, 27++, unplugged from power adapter, 0% battery. Press Power button -- power up loops.
Just faced a rather strange issue, but not really an issue, just different system behaviour than expected. System: W520 Batteries: 55++ connected 27++ connected Power adapter: Unplugged No other accessories connected. Scenario: I was using the system
-
EAS 9.3.1.4 service pack does not contain eas.ear
Hello Experts, One of my customer has the following issue: Currently at version 9.3.1.0.0.135 of EAS and version 9.3.1.0.0 for Essbase. They have downloaded the EAS 9.3.1.4 Service Pack and extracted the zip file and setup.jar file but the package do
-
BPM: Multiple IDOC collect into one file
Hi I have done collecting multiple IDOCs of same type into one file using BPM I have used the following blog which is collecting different types of IDOCs. IDOCs (Multiple Types) Collection in BPM But i have done collecting of IDOCs which are same typ
-
Passing values from one iView to other iViews in the same page
Hi all, I have one entry jsp+htmlb iView and two other BW iViews( URL based). The entries made in one iView serves as the input for the other two iViews to generate BW reports. I know we should use EPCM event API but how do I dynamically change the
-
Images won't open properly in cs6
I upgraded from cs5 to cs6 and my images are not opening properly in cs6. What can I do?