HT1937 I have successfully restored my iPhone 3 gs( Ios ) by itunes. After activation it is asking for activation. When I am going for activation its saying that no SIM card is inserted, but I have already Ufone SIM card is inserted. I checked it with ot
I have successfully restored my iPhone 3 gs( Ios ) by itunes. After activation it is asking for activation. When I am going for activation its saying that no SIM card is inserted, but I have already Ufone SIM card is inserted. I checked it with other SIM card like Zong etc but the response was same i.e; no SIM card is inserted. It not catching the signals. I am trying to use my wifi to activate my iphone but it iss not processing then i used itunes to activate by it's again saying that no sim card is detected.
My all contacts and all data is in this mobile. Now Iam unable to contact anyone. Please help me. How can I sort it out?
Thank you
Regards
Wazir Ali
Well, if you did it yourself, then there is a chance that you damaged some other component inside the device that is causing your issue. The iPhone's are not user serviceable, and once you have opened the device you have voided any warranty and post-warranty support from Apple. I would try Google to see if you can find any other way to repair your device, as Apple will no longer look at it.
Similar Messages
-
Every time I try to install iTunes on my Macbook it comes up with an error messaging saying that my software is out of date. How do I get it to download?
What is the exact message?
Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About This Mac". Write down what it says about "version"and report that here. Now continue to "More Info..." Copy and paste the information here, but omit the serial number and Hardware UUID (if present).
Which version of iTunes are you running? -
i have tried everything but its not working!!! @
1. Download the .dmg file and save it to a folder on your computer.
2. Quit After Effects CS6 if it is running.
3. Double-click the .dmg file to open it, and then double-click the AdobePatchInstaller.app file to launch the patcher.
4. Follow the on-screen instructions. There might be a slight delay before the update progress meter starts moving.
im having trouble updating after effects.
im having problems with the third step. help me please -
I get this when I load the program. It is a stand alone version on Win7
That was it, Thought it was smarter than that.
Thanks for your help. -
i already restored my iphone succesfully using an itunes on my desktop, my iphone restarts and to configure language,country etc.unfortunately, activating my iphone is not possible itunes told me to insert a sim but my simcard was inserted...help me pls.
Most likely, your phone was previously hacked to carrier unlock. When you restored the phone, the hack was removed and the phone re-locked to its original carrier. It now will recognize only the SIM card from that carrier, and can be used only with that carrier.
-
Every time i connect my iphone to itunes and trying to do a backup or get the new update it says i have to restore my iphone. and then that doesnt work, i tried to reinstall itunes but it doesnt work. i get this all the time. fix it please.
iTunes states " There's a problem with your Iphone, please contact apple service center " Also i took my iphone to a local service man and he told me the IMEI code has been corrupted and there's nothing that can be done about it. Please help, if you have any solution.
Thank you -
i have updated my 4s iphone to ios 6.1.3 and have trouble connecting it to wi fi . i tried to back up it on itunes and then restore it but now i have left with a phone that still doesnt connect to wi fi and lost all my data. anyone knows how to fix it?
If no change after restoring the iPhone with iTunes as a new iPhone or not from the backup, there is a hardware problem.
-
I tried to play a song on my iphone 4 but it didnt let me so i thought let me update my iphone to the IOS 6.0.1 since i havent done it yet. When i did it told me to connect to itunes after doing so it told me i have to restore my iphone. But i cant since i have so many things in it that are needed to me and my iphone is not synced into my computer. what can i do to make my iphone work again without restoring
You are in Recovery Mode.
You need to connect to iTunes and restore.
Hopefully you have a backup. -
After my friend locked me out of my iPhone with too many wrong password attempts I restored my iPhone via recovery mode and now it is showing that picture of a cable leading towards itunes, and itunes says the sim is not supported but it is the original sim. How do I fix this?
Something went wrong with the update, this can and does happen with every version of iOS.
There is nothing wrong with the update.
Simply restore the device via iTunes on the computer.
If iTunes is stating it will take hours to update, that indicates an extremely slow Internet connection and is likely the reason the OTA update failed. -
i had recently followed orders to restore my iPhone 3gs (iOS 6.1) from a question on apple support. However it was working fine before that, it's just that my phone didn't have signal. So it said to restore my iPhone and now it says that the Activation server is temporarily unavailable and when i plugged it into my mac, it said that i ddn't have a sim card installed. What can I do to fix this besides bring it to the store? it also bugs me because this answer was supposed to work but it just messed my phone up even more. This has already happened once and i had to take it to the store. What should I do to fix this? Thank you so much for all answers. i really appreciate.
no so i dont know what happened
-
i updated my iphone 3gs to ios 5.0.1 from ios 4 , now its saying that sim is not activated but the sim is still inside
PLSS HELP ME OUT !!!!Sounds like your phone was hacked to work with any network. Doing the update re-locked it to the original carrier. All you can do now is contact the carrier it is locked to to see if they have an unlocking policy. Note that if it's AT&T they do not offer unlocking. otherwise find an un-activated sim for the original carrier and you can use it as an iPod.
-
i need to free up storage on my iPhone 4s to do an update. I have turned off my photo stream, but when I go into Usage Settings, it says that photo stream is using 3.7gb of space. How do I get rid of this?
iCloud is not designed to "store" photos (as in long term storage). iCloud can be used to sync photos from one device to another (photo stream) and to store a backup of the camera roll. But that's pretty much it.
Camera roll is the group of all photos taken by the device (but not other photos synced to the device from another source). Your extra storage on icloud will do you no good. The recommended way of storing photos on a device is to sync them to a computer.
So, your questions..
1) You don't/can't
2) No, because of 1.
3) On a computer, deleting large groups of photos is relatively painless. not so on a device.
4) You can't access photos on iCloud because they can't be store in icloud. You can't view/access photos in a backup on icloud unless you restore a backup to a device.
Read this... import photos to your computer...
http://support.apple.com/kb/HT4083 -
Why do I have to restore my iphone repeatedly?
My iphone keeps dying and I have to restore my iphone repeatedly. I just restored as a new devise last week. Today I tried uninstalling and installing an app that refused to open and all my apps disappeared even the pre-installed ones like mesaages, itunes, phone and such? Is it time to get a new phone?
I still have a fully operational original iPhone so while it absolutely can, that doesn't mean that it will. There's a number of things that could cause this. You could check with your local Apple Store to see if it can be repaired but personally I would just get a new one in your scenario.
-
I forgot my password\i get my phone back and i forgot my password so i read that you have to restore your iphone so when i tried restoring it it said the i phone cannot be restored at this time something about cant be contacted with the server and i youtubed how to fix that and it did but when i tried it again it said error (3194) so i went back and it said it cant be restored at this time please im paying 100$ per month and i cant use my i phone 4 hep....
Error 3194 most often means that your Computer Hosts file is blocking Apple from signing your firmware. Search on your computer for the word 'Hosts'. Open the Hosts with a word processor. If gs.apple.com is present your Hosts file is blocking Apple, and therefore giving Error 3194. A stock Hosts file does not have gs.apple.com in it. If want Apple to Restore your Firmware you will need to remove the lines with gs.apple.com in them.
-
i restore my US version iphone 5s by connecting itunes after restore it shows hello and select country, and activation, but it does not activating why? is it work in china ?
If the iPhone is locked to a US carrier, you cannot use the SIM card of another carrier on it to either activate it or use the iPhone.
If you want to use your iPhone with China unicom, you need to get it unlocked by your US carrier. Contact them to see what their unlocking policy is and if you qualify.
Maybe you are looking for
-
Importing swf file with skin and closed captioning problems
I created a flv file in Preimere and I pulled it into flash to create close captioning. When I publish it, it creates a swf file that I can open up on its own and it has the skin with the button to push to show the closed caption. When I try to bri
-
Is it possible to increment the table rows automatically?
In my HTML page I created one table with some columns but i'm unable to write code for incrementing the rows dynamically.... i.e.. soon after entering the data in the last column, a new row should be automatically created by pressing enter key (witho
-
Is it possible to do 3D fitting in Labview?
Hi, I have a function of the type z=f(x,y). Is it possible to fit z in terms of polynomial of the form z=a+b*x+c*x*y+d*x*y^2+.... using Labview. I have Labview 7.1. Thanks, Hamza
-
Problem is , if I have a text in excel column as " line1 'alt ENTER' line 2 " and if I read this text using VBAscript and write it back to illustrator, it appears continuously like "Line1Line2" the line break does not happen. Mark Mcclure, please hel
-
Seeburger EDI Text to EDI XML conversion failure should throw an error
Hi, I am expecting an error message to be thrown when EDI Text to EDI XML conversion fails at Message splitter of Seeburger module. I am getting the following error in the log. "2012-01-19T01:46:08.032-0800 ERROR [Error:ID=2150;LEVEL=3] counter value