HT1977 I have tried these steps, but I cannot even select the Sync Apps box at the top of the apps page. I would much rather add my apps manually instead of using my 3G, but I cannot. What should I do?
The only thing my itunes is letting me do is to click on the Sync option on the bottom right corner.
The only thing my itunes is letting me do is to click on the Sync option on the bottom right corner.
Similar Messages
-
I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work. I am using Yosemite. May I know what should be the command line so that I can shift to an open DNS? Thanks
>SystemPreferences>Network>DNS
-
HT4097 I trie these steps but it only shows the silver apple and it won't go to the home screen.
It won't even open iTunes when I connect it.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
When I try to print from I photo ie a A6 lanscape picture a page apears showing me how I want the picture on the selected paper and size ie "fill" I then press print and then a window apears showing how it will apear on the paper and it continously shows the paper as portrait and the picture I am trying to print appears in a lanscape form so that only the center of the picture is printed with two white areas apearing top and pottom. Why does the picture not print in the correct direction as the print page shows I selected landscape format. I hope you understand.
Hi,
Tried all the cleaning programmes and it still will not print...I am lost. -
My apps are not updating as I have no longer access to my eariler apple Id and now I am using a new apple Id which is allowing to download apps but while updating those apps my iPod wants eariler apple Id password to update what should I do ?
Hi Kanishk,
Those apps are forever tied to the Apple ID they were purchased under. You can either delete them and re-purchase them, or you can go to Manage your Apple ID and reset the password on the old Apple ID so you can use it to update your apps: Apple - My Apple ID
If you decide to continue to use them under the old ID password, I would suggest that when you reset that password, you change it to be the same password as the one you are currently using. That way when apps need to be updated you will only need to know one password and you won't have to be concerned with which Apple ID is displaying.
Cheers,
GB -
it's not working, my itouch freezes on the main menu "unlock" i did these steps but it just won't do. what should i do?
- Try placing the iPod in DFU mode and then restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Next, try restoring on another computer. -
i have 4 ricco md2 mini USB speakers and i can't get them to play at the same time. i have tried using the aggregate device feature but have had no luck. i can play each pair separately, but not together. what should i do?
i have 4 ricco md2 mini USB speakers and i can't get them to play at the same time. i have tried using the aggregate device feature but have had no luck. i can play each pair separately, but not together. what should i do?
-
I started my app store account with a gift card. I have $0.68 credit remaining and I cannot change my settings to use a new gift card. What should I do?
Done what? All you can do with an iTunes gift card is redeem it:
-
I already try these steps but I still got the problem I can't make a video call at all or receive .
Here som other steps you can try;
Make sure that you have an internet connection
Make sure that you have a valid Apple ID (check here: myinfo.apple.com). Note that your Apple ID to register FaceTime on iPad 2, iPod touch, or FaceTime for Mac must be an email address. You can create a new Apple ID or make changes by visiting myinfo.apple.com and using the “Manage your Account” part.
Tap Settings > FaceTime to see that your email address is verified. If your status is saying “verifying,”; then try toggling FaceTime off and on (Settings > FaceTime OR FaceTime for Mac: FaceTime > Preferences)
Try turning FaceTime off and on again using the following (iOS: Settings > Phone OR FaceTime for Mac: FaceTime > Preferences)
Make sure that FaceTime is enabled (Settings > FaceTime.)
Make sure that the camera for FaceTime is not restricted (Settings > General > Restrictions.)
Tap Settings > General > Date & Time to check date and time are set correctly.
Make sure that you are using the correct method for calling the person. iPhone user: Use the phone number; iPad 2, iPod touch, or FaceTime for Mac user: Use the email address -
Ipod not syncing to itunes and i have tryed every step it told me to what do i do?
ipod is not syncing to my itunes and I have tried every step on the apple troubleshooting and it didn't work what should i do?
We may need more information: have you been able to sync before? when the ipod is plugged in and itunes is up is the device recognized?
-
i have tried to reinstall itunes because it is saying i cant use my itunes due to an error 7, itunes helper not installed correctly, please reinstall, i have tried several times but still not allowing me to use, ive never had this problem before in all the years i have used itunes, i have gone through all the troubleshooting but still no access, can you help
Many thanks.
That suggests that another application has stashed old QuickTime componentry in your system files.
So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
If you have a 32-bit version of Windows, open the "System32" folder.
If you have a 64-bit version of Windows, open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.) -
I have a Ipod Touch 5G and a Ipad 4th Gen with a Bose sound dock with a 30 pin adapter. I have tried several connectors but cannot get any audio on the sound dock. Do you have any suggestions?
Have you tried this adapter from the Apple on-line store http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=3c They also have one that uses a cord to connect the dock to lightning that is $10 more.
-
i am having major issues! this does not work i dont understand..does the ipod have to be off while pressing the buttons if so how is it possible if it is connected to the computer either way it turns on..and when i tried these steps while the ipod was on it still doesnt work it just asks me “slide to power off” please someone help me i just cant seem to put my ipod in DFU mode
To get the iPod in recovery mode and DFU mode you first have to turn the iPod off.
Just what is the problem you are tying to resolve?
Sometimes you have to let the battery fully drain if you can't turn the iPod off. After charging for at least hour try again. -
I purchased iPhone 5S unlocked from T-mobile. But now I am in India and I want to use India's Vodafone GSM. What should i do ?
Put the Indian sim card in the phone and start using it, that is always assuming that you have not first activated the phone using the T-Mobile sim card, in which case the Indian sim card will not work as the phone will become locked to T-Mobile and you'll have to get it unlocked by them.
If not, put the Indian sim card in the phone to activate it and then start using it. -
Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/
Have you moved Pages from its installed location? Or just dragged a copy to your current system?
It can't find some of its resources apparently.
Peter
Maybe you are looking for
-
How Do I use my time machine as an external hard drive?
-
Having trouble installing Photoshop on Mac OSX 10.7.4
Hello Im having trouble installing Photoshop CS6 and Illustator CS6. I am geting the following errow while trying to install in Creative Cloud Download Manager: Exit Code: 34 -------------------------------------- Summary ----------------------------
-
Setup for Down Payment made to the Vendor for Capital Assets(Otherthan AUC)
Hello, Can any one explain how we can make down payments to vendors against capital assets and what setup is required for this. Plz advice.
-
I know you can't set an swf file as a cell or table background, so I'm now trying to use a swf file as the background on my web page. Set up some div tags, but can't seem to get that to work, either. Is it even possible to do this? I'd like to have t
-
how do I switch between windows in the same programme? I know that I can use Command tab, however this takes you through all of the programmes that I'm using. What I need to do is have a shortcut to switch between windows in the same programme. For