HT200156 after opening aperture 2 when attempting to work with a thumbnail aperture closes.
after opening Aperture 2 and selecting a thumbnail to work on Aperture quits . Does anyone know how to fix this?
Does anyone know how to fix this?
Upgrade to Aperture 3
Seriously Aperture 2 has been marginal ever since Lion came out. People have been able to get it to limp along but there have been major issues. That is has worked at all till now is somewhat amazing.
If you continue to try and work with Aperture 2 in Mavericks make sure you have good working backups of your libraries. There is a chance that using 2 with Mavericks will corrupt your libraries.
Similar Messages
-
CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there a way around this? Is there a patch to correct it?
To build CD's???
What problem does Encore have with DL?
If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore. -
Compressor crash when attempting import files with 00* in name
I produce several short video files every day and name them using a sequential five digit numerical naming convention.
I'm finding that whenever I'm near, at or shortly after crossing a 100 mark Compressor crashes when I try and import single files with the following filenames (these are the most recent examples):
20993
21000
21001
21005
The only way to import these problematic files is to select the file before, or after, then Command click on the filename causing the crash. Click Open to import both into the batch, and then click on the file I first clicked on and hit Delete to remove it from the batch, leaving the file with the problematic name.
For Example. I want to import 21005 into Compressor for processing, but every time I try and import it Compressor crashes. So I re-launch Compressor, click the little Q button and click on 21004, then press Command and click on 21005. Click Open, import window goes away to reveal the Batch window. Click on 21004, press Delete button on keyboard leaving me with the file that was causing the crash.
FWIW apart from the file duration/size, there's no difference between these files. In fact I can change the names and the files that used to import fine now crash Compressor when attempt to import with any of the filenames above.
Here's the info behind two of the problem files and also that of the two adjacent files that import fine:
(all files: Dimension: 720 x 480. Codecs: DV/DVCPRO - NTSC. Channel Count: 2. Kind: Final Cut Pro Movie File. No color labels.
20999 (Imports Fine):
File Size: 394,475,469 bytes
Duration: 01'44
21000 (Compressor Crasher):
File Size: 324,052,925 bytes
Duration: 01'26
21001 (Compressor Crasher):
File Size: 339.730.909 bytes
Duration: 01'30
21002 (Imports Fine):
File Size: 348,707,181 bytes
Duration: 01'32
Compressor 2 - 2.0.1
Dual 2 GHz PowerPC G5
1.5 B DDR SDRAM
Mac OS X 10.4.8Hello,
Thanks for the replies/info.
Yes the Panther and Jaguar install disks are retail versions, not specific machine versions. And the Jaguar ones worked for the Powerbook before.
The Powerbook I have is the Firewire 500mhz one, Pismo I think it's called. The hard drive is a 60GB one. I didn't have to partition it before.
Reviewing all the above, it would appear that the problem is me not being able to use an internal, built in CD/DVD drive to install from this time? The only other thing it could be I think is the crash I recently had has had some bad effect -- but that's unlikely right? So, I need to get a new DVD drive? Or is there any other way to get the OS onto the Powerbook without getting another internal DVD/CD drive? Is there anyway to install onto the PB from another machine maybe?
Does that sound right?: not being able to use internal DVD/CD drive is the source of my current problem?
Thanks. -
Baud rate and parity are set correctly, RS-232 cable is also connected correctly. My QuickBasic program has no problems to read and write to the Multimeter. It is obviously a software problem: the same error is persistent if I disconnect RS-232 cable.
I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm digital.ni.com and installed it. But it did not help.
Thank you in advance
Best regards
Alexei SolovievHi Steve
I have problems with the 34401A and serial communication. Do you remember
where the error was in the code ?
Thanks
Klaus
wrote in message
news:[email protected]..
> Alexei,
> This may or may not help, I was tasked to do something similar
> recently and found an error in their driver. The GPIB VISA worked
> fine, but when I tried it on serial it played up. There was an errant
> carriage return (or CR/LF I can't remember). GPIB liked one and Serial
> liked the other. It always amuses me that we never have problems with
> Quickbasic!.
> If you want me to dig deeper give me a shout.
>
> Steve Watts
>
> On Thu, 24 Jan 2002 06:16:55 -0800 (PST), "Alexei V. Soloviev"
> wrote:
>
> >When trying
to work with Agilent 34401A multimeter (serial RS-232
> >connection), HP34401A Getting Started.vi gives always the message:
> >"Error 1073807369 occurred at Old VISA Open ".
> >
> >Baud rate and parity are set correctly, RS-232 cable is also connected
> >correctly. My QuickBasic program has no problems to read and write to
> >the Multimeter. It is obviously a software problem: the same error is
> >persistent if I disconnect RS-232 cable.
> > I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm
> > digital.ni.com and installed it. But it did not help.
> >Thank you in advance
> >Best regards
> >Alexei Soloviev
> -
When attempting to print with an HP P2015 cabled to an AirPort Extreme, the network won't connect to printer. The Print Que message is "Network host (name) is busy; will retry in (number) seconds." When I delete the file to be printed, the Print Queue screen says "Printer Ready".
More Information:
The printer's Queue Name is Hewlett-Packard HP LaserJet P2015 Series
The Location is "(my name) AirPort Extreme"
URL is "Hewlett_Packard%20%HP%20LaserJet%20P2015%20Series._pdl-datastream._tcp.local./ ?bidi" (for whatever that means)
Driver Version is 18.4
Printer Software is HP LaserJet P2015 Series
The printer is listed as a printer on System Preferences/Print&Fax screen
If I connect the printer cable directly to the iMac, the printer works fine.
Any helpful directions would be greatly appreciated.I came across an Apple article last modified 6/2/08 (Printer troubleshooting for AirPort Base Stations and Time Capsule). It suggested the old standby, i.e., disconnect the AirPort Extreme Base Station from its power source, turn off the printer, turn on the printer, and reconnect the AirPort to its power source. It worked. I guess disconnecting the AirPort cleared out the network host. Yea.
-
Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks. -
I accidentally input the wrong email address when attempting to register with iCloud. Therefore, I can't verify the account because the email address that I accidentally used does not exist. Can someone help me figure a way out of this because there does not appear to be a way to edit the email address?
try https://appleid.apple.com... enter the new icloud id, and try to edit the email address assocaited.
-
I am unable to print to the Lightning PDF software (by Avanquest Software) after updating to 6.02. It worked with the previous version of Firefox. Is there a patch or fix for this problem?
This is the error that is received:
Cannot open file "C:\Users\Calandra\AppData\Local\Temp\Ask_a_Question__Firefox_Help.pdf". The process cannot access the file because it is being used by another process
Any information that you can provide will be greatly appreciated.Sorry to say that, but the entire system seems ill-designed.
If I understand correctly, then to add a new Section to a site, you have to subclass SubSection and somewhow integrate that into the system?
I would be my expectation that you only need to subclass SubSection when you tried to introduce a new type of SubSection.
The title & all other natural language Strings should never be hardcoded in Java code, but rather taken from some external storage (Database, XML, flat files, ...). -
Bugged audio playback? When I start working with more than 1 audio track.
Hi!
I have been using premiere elements 12 for editing FullHD videos.
Brand new for me just bought it like 2 weeks ago.
Now during the last couple weeks I have had this MAJOR proglem with editing the audio.
This problem is headache and turns my simple editing into almost impossibilites.
I have had this problem with all my projects. _ALL_
Usually the problem seems to appear when I want to start working with several audio tracks.
At somepoint my projects just get ruined, I simply cannot hear the audio tracks.
The audio starts to disapear randomly from all the audio tracks.
It is not only playback problem. When I exported the video, the audio was partly missing, same as the project.
I have tried to look help on forums and search all what I could find, but havent been able to solve this.
Small fix has slightly helped:
I export audio to single track and bring it back to project. This works but I still usually have more editing to do.
I simply cannot understand why the playback disapears, I fear it is a bug.
I found lot of earlier version problems on people with similar type of problems, but no help for this version of program.
To solve the matter I have changed my audio setting in PE12.
Tried Premiere Elements WDM Sound and ASIO4ALL V2, but same problem on both.
I have looked up that my audio playback device and PE12 matches, and are not muted, and volumes maxed.
I have deleted my C:\ appdata\roaming\adobe premiere elements & premiere elements 12 folder preferences.. not helping..
I press the update pretty much everyday hoping for new version.. But yes, program keeps telling me its the latest.
I usually only work with 3 audio track maxinum. And I am doing really the most basic stuff here..
I have set all my audios to foreground and it has given me best results, but it does not seem to take the problem away as at somepoint randomly my audio playback is missing again, randomly across the playback.
Please anyone? I am feeling hopeless here.
Info on my computer:
Operating system: Win7
Processor: AMD Phenom(tm) x4 955 processor 3.20 GHz
memory (RAM): 4GB
system: 64bit
<moved from downloading, installing, setting up forum by mod- kglad>
Message was edited by: kgladFirst of all, thank you for replying my message!
I will go and try to answer best I can.
Source media properties:
Progressive frame rate, I record this from a game.
Recording program: dxtory
codec: Lagarith Lossless codec
Format: avi
Frame width: 1920
Frame height: 1080
Data rate: 1990656kbps
total bit rate 1992192kbps
Frame rate 30/frames/seccond
Audio of video properties:
Codec: PCM
Format: 16bit, stereo
Bit rate: 1536kbps
Channels: 2(stereo)
Audio sample rate 48 kHz
In addition to that I use wav files for music and narrate
Music files sizes 20-50mb
bit rate: ~1411kbps
In total sizes of audio involved is usually something like 300mb
What are you or the program setting as the project preset in the new project dialog. See Edit Menu/Project Settings/General and its Editing Mode, Timebase, and Frame Size readings.
I opened new project and this is what i got:
Editing mode: HD 1080i
Timebase: 25,00 frames/second
Frame size: 1920 x1080
Audio is 48000 Hz
(I dont know how to change these, btw. Program don't seem to let me change editing mode.
I also looked up my most recent project and found these settings:
Editing Mode: DSLR
Timebase: 30,00 frames/second
Frame size: 1920 x1080
..and same audio settings
Do the problems persist if you start a new project? Do you find the audio problems develop when the Timeline content is fairly well developed or can the problems occur when there a minimal amount of content of those tracks? Let us look at the size and duration of this project.
Yes, I have had this problem with all my projects. Sometimes it goes away tho, just enough for me to work bit more. My work progress usually starts by clipping the video material, like 1h material to 8minutes in clips. After that I want to work with audio tracks, and here problems start! When I start working with more than 1 track, so the problem is at later stage. To fix the problem a small fix I have used, I export audio like music and effects tracks together to 1 wav and bring it back. After that, I start working with narrate track. To describe the problem with audio:
Audio Randomly starts to disapear when I playback, and can also be gone if I export the video out.
My source videos total size are usually within 80Gb max limit and audio edit material 300mb total.
In my last project my biggest source video was 47GB and leingth of 1h 4m, in addition to that I had 3 smaller videos, sizes of 1GB, 1,54GB and 300MB.
Is there any evidence that you are accidentially moving the audio track rubberband to alter the audio volume. That rubberband is the orange line that runs horizontally through the middle of the audio clip when you are looking at the wave form display style of that audio track. The rubberband represents audio volume.
No, audio volumes might have been adjusted in my tracks but they are present. The problem is usually like ~2-5seconds, a random audio track can be heard (like music or narrate) or just no sounds at all. This makes it very difficult to work with the audio. Also I gotta say that this problem starts by simply having the 2-3 audio tracks.. In my recent project the only adjustment I used to edit the audio was fade in/out.
I don't have any other audio problems with any other programs.
I am more than happy to provide more information if needed. I hope this information helps.
In addition I can say that when I close Adobe Premiere Elements 12, it crashes. No idea why.
I have also looked up my firewall settings, anything involved adobe and premiere..
In addition some effects like HD text templates make "Adobe Media Core CS6" crash. I tend to just not use em, or if I need em, I add em at end of the edits.
I hope this helps, I would really like to solve this problem.
Thank you alot for taking the time to answer! I welcome anyone to help mee too! Please giev links to similar problems too. Thank you everybody! -
Quick Time screen capture freezes when i'm working with Modo 3D. Any solution?
Hi guys, When I'm working with Luxology Modo, Quick Time screen capture freezes every time on Mac OS X Mavericks. When I'm doing some operation in Modo, like slice geometry per exemple, QuickTime crashes. I must force quit quicktime and when I relauch the application, the screen capture opens but screen capture ends at the time when I cliked on the Modo slice operation. It's frustrating because I can't do nothing with screen capture. I tried other screen capture applications but the problem persists! When I was using Snow Leopard Quick Time works very well!! Do you have some resolution for this problem? Regards, César.
I'm using OS X Mavericks as well, and it seems like the same thing happens when I try to type in MonoDevelop, part of the Unity package. Unity works fine, it only seems as though I can't screen record typing in MonoDevelop. It looks like it's still recording, it just has the rainbow wheel of death after I try to finish out the Quicktime. I left it up for several days and ignored it, but it still didn't finish. I finally had to force quit it and reopen it and when I did it opened up the temporary file of the video I was recording, but it stopped whenever I started to type into the MonoDevelop interface. The first time it let me save the video to the desktop. The second time, the time which I left it open for days, it would not let me save it, on command-S or on exit. I don't know exactly what's wrong, but I believe that you know as much as I do. Please post a reply if you need any more information or have a fix.
-
TS3999 when will iCloud work with outlook 2013?
when will iCloud work with outlook 2013?
I have been running Outlook 2013 for a couple of weeks now using W8 64bit.
It works with iCloud and is a little flakey, what I've found.
1. 4 X Junk Folders.
2. Some emails cannot be moved into saved folder, saying message has changed, but opening in outlook safe
mode allows move.
3. Sent Items (this computer only) and Sent Messages, so you have to move emails from Sent Items to Sent
Messages if you want them to sync across devices.
4. Icloud control panel say's there is a problem and not syncing but it is no problem.
I can live with the bugs, but I wish the last icloud update would have corrected the issues. -
When I'm working with my Ipad it locks on its own and every several minutes I have to unlock it. Help please
If your iPad was work provided there may be options that they locked out. For example, a privately owned device can be set to never auto lock (last I knew anyway) but it's not uncommon for work or school provided devices to not have the 'never' option.
-
HT5105 How can you do picture in picture when you are working with a Multicam clip?
How can you do picture in picture when you are working with a Multicam clip?
Im doing a drumming music video and with the multi cam clip all the angles are nicely sync'd top the audio.
Problem is if i want to have 3 angles on top of the main shot, im gonna have to re-sync them all to get them to line up manually. If i could use the multi cam clip they will already be aligned
Thanks for trying to help appreciate, hoping someone has some multiclip knowledge and will be able to tell me if yay or nay. -
My mac get very hot when I'm working with it is it normal??
my mac get very hot when I'm working with it is it normal??
When posting in Apple Communties/Forums/Message Boards.......It would help us to know which MBP model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
***This will help in providing you with the proper and/or correct solutions.***
============
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios. -
Why is firefox opening my jpegs when I am working in photoshop?
Firefox has taken over opening jpegs when I am working in Photoshop CS5. I am trying to work on my photographs and firefox is interfering. I do not want firefox to do this.
== After recent firefox update.Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
You have a driver from 2003 installed, you may want to check for a update to that.
* driverDate: 7-28-2003
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.
Maybe you are looking for
-
How to show a WAD template in Portal
Hi ALL How can i show a WAD report (WAD template) in Portal. what are the steps need to followed. Like for Bex Application Iview we create it by using a Query String(combination of infocube name and Query name), like wise what should be done from Por
-
ORA-00001: unique constraint @ impdp with table_exists_action=truncate
Hi everybody I can't understand why my data pump import execution with parameter TABLE_EXISTS_ACTION=TRUNCATE returned ORA-00001 (unique constraint violation), while importing schema tables from a remote database where the source tables have the same
-
hi friends, i have installed a different version of JDev 11.1.2.4.0 as per my new job requirements and i am unable to run my .jspx page ... i already have 11.1.1.6.0 installed and running ... the following is the error that i am getting... can anyone
-
Workbook Displays Data Not Present in the Cube for Non-Cumulative KF
Hi All, I have a user that is reporting using noncumulative info object 0TOTALSTCK. If I look in the cube, the data starts in October and goes from there. When viewing the data, there are figures that display for the months prior to October even thou
-
Problem is with Hotmail. Usually when I start to type an address which is in my contact list, it fills in automatically. Now I just get a circle going round and round. If I go to my contact list and select an address and click on "send e-mail" it goe