HT200197 my apple tv indicator light is blinking rapidly.
I have disconnected and reconnected everything. Still no change. Any ideas?
My Wifi is working. My Apple TV is updated (last one available)
The TV screen shows an image of a USB cable pointing to an iTunes image .. but I can't DO anything!
I was finally able to determine my generation and do a restore. Hoping that solves it.
Similar Messages
-
My Apple tv status light is blinking fast - how do I troubleshoot?
my Apple TV gen 2 status light is blinking fast and I am not able to see anything from my Apple TV - how do I troubleshoot? What I read on the Apple site is that my Apple TV has issues. My Apple TV is hard wired to my Ethernet network. It is connected to my TV using an HDMI cable. It worked in the past but when I turned it on today it did not work. I have not used it in several months and we had a bad thunderstorm here a couple weeks ago.
I'm having the same problems as you. Any solutions? This is what i'm facing
1. No video signal at all
2. Plugged in power cable only, there is no light
3. Plugged in micro usb, there is flashing light
4. Restore via iTunes is sucessful but problem still persists -
I've tried shutting it off, unplugging the device but nothing works.
I miswrote. I meant "how do you connect it to the computer?" Sorry. In any event, the posts here indicate that it will for now be a waste of my time to try the time-consuming fixes that have fixed things for nobody.
-
What is the problem?
Hi FraX93,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Here are the instructions on performing a software repair on the device.
1. Before you start you have to download the PC Companion software from http://www.sonymobile.com/gb/tools/pc-companion/
and install it on your PC.
2. Once installed on your PC, double-click the PC Companion icon on your desktop to start the update.
Note! For some models you will be prompted to do a backup prior to the update and then restore.
3. Install and open PC Companion then select Support Zone.
4. Phone Software Update.
5. Start.
6. Repair Phone
7. Continue
8. Accept data removal
9. Next
10. Wait for prepare
11. Select Phone
12. Follow the connection steps
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?
The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
http://support.apple.com/kb/HT4367 -
Apple TV status light blinking white
My apple TV status light is blinking white and the TV gets no signal. I have re-booted the apple tv and it gives me the sign to plug it into iTunes. I cannot do that as it has no USB connection so I am bit lost. I also have no idea how to tell which generation Apple TV I have. I have had it for a few years and finally had a reason to use it. I am pretty sure it is a 2G, but I am not sure. It worked when I initially set it up for a few minutes then required a software upgrade and everything went downhill after that. Any suggestions? Is it garbage?
I cannot do that as it has no USB connection
Yes it does. Its on the back.
The upgrade process failed for some reason. It just needs to be connected to iTunes via a USB cable so iTunes can manually install the firmware. -
Apple TV Light constantly blinking
Hi My apple TV is giving a problem of Light constantly Blinking and my TV mnonitor is not responding to the TV being connected .
I have disconnected the device 2-3 time as indicated in the Set Up Guide but no help.
Please advice how to fix this ..I would pull the plug for 30 sec and reconnect it
and if that did not help I would connect it by usb to the computer and use itunes to restore the firmware
if that did not help I would return it under warrenty -
My apple tv is not working, the front light its blinking
my apple tv is not working the front light its blinking the only image on my tv is the apple picture
You need to restore
Restore your Apple TV (2nd and 3rd generation) - Apple Support -
When I plug in apple tv the status light just blinks amber and nothing appears on the screen
When I plug in my apple tv (first gen) the status light just blinks amber and nothing appears on the screen. The status light never turns white and won't stops blinking amber. I've tried to over ride this with the remote, resetting it and trying to revert it to the factory settings. Is there a way to wake it up or is it a lost cause?
Welcome to the Apple Community.
The system looks like it's unable to start up, this could be software but more likely hardware, either way unless it will start up there is nothing a user can do to resolve this. -
When did the green, wifi indicator (in lower left corner) get added? And how can you get rid of it?
What WiFi indicator light?
Are you talking about on the actual Apple TV device or on some screen somewhere?
There is no green indicator light on the Apple TV device! -
My remote for my Apple TV just stopped working and I have tried putting in a new battery, re-pairing the remote, resetting the device by unplugging it, and I checked the infared coming from the remote is working. The light just blinks at me 3 times what else can I try to fix it?
Have you tried unpairing the remote? You do this by pointing your remote at the Apple TV and holding the MENU and Left buttons down together for 6 seconds.
-
HT1551 Apple TV Box light blinks rapidly and continously. What's the problem?
TThe light on my Apple TV blinks rapidly and continously and does not respond to the remote. What's the problem?
You'll need to use a micro USB cable. If you don't have one you can get one at most electronics store. If you have a gen 2 you'll need to disconnect everything from the Apple TV then hook up the cable and connect to iTunes.
-
HT5706 my apple tv light is blinking fast and telling me to hook it up to itunes
apple tv light is blinking fast and telling me to hook it up to itunes. is there any other way to fix this?
No.
You could take it to an Apple store for them to do it.
See:
http://support.apple.com/kb/HT4367
Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3. -
Apple tv 2 status light is blinking fast
hi after a restore
apple tv is not working now
1. No video signal at all
2. plugged in power cable only, status light is blinking fast
3. plugged in micro usb, there is no light
4. can not restore atv2 not recognized by computer (tried several ports, several micro usb cords, mac and win pc)
5. plugged micro isb and power, blinking fast
6. plugged power cord, and hold down menu and play button status light is going to blink faster after stop pressing menu and play it goes on blinking as it blinks before
what should i do ?Any solutions?I'm having the same problems as you. Any solutions? This is what i'm facing
1. No video signal at all
2. Plugged in power cable only, there is no light
3. Plugged in micro usb, there is flashing light
4. Restore via iTunes is sucessful but problem still persists -
Hello,
My wireless keyboard was paired with my iPad for a while, with no problem. Today I've unpaired it and tried to add it to my MBP (which I've done plenty of times in the past with sucess) but it's just not discovering it today.
Bluetooth is on, my laptop is discoverable
The MBP is picking up my phone, the iPad can see the MBP
The keyboard is turned on and blinking
Whether I try to 'set up new bluetooth keyboard' from Sys Preferences or 'set up bluetooth device' from Bluetooth menu, nothing happens.
Any ideas?
I've tried removing batteries, retarting the laptop..... Why should I try next?
Thanks in advance everyone1. Go to Settings > Bluetooth and turn off Bluetooth on the device.
2. Hold Power button of your keyboard until the light stops blinking.
3. On the Mac, go to System Preferences > Keyboard > Set Up Bluetooth Keyboard.
4. Turn on the keyboard. If it doesn't connect to the Mac, press any key of the wireless keyboard.
5. When the keyboard appears on your Mac, choose Continue
Maybe you are looking for
-
Error Message: Code could not be generated successful​ly for the VI
I created a simplified model of an 8-pole DC servo motor with friction brakes that drives an actuator through a gear train. I can't get past the subject error message. The error is about the VI named ""Sermat 3-Phase 8-Pole Motor with Friction Brake"
-
Can anyone point me in the right direction for solving this error? Having bought a pc and loaded up I-tunes before i was connected to broadband I am very dissapointed to find out that now I am on broadband.. every time I go into I-tunes and try to co
-
I get error 21 when I try to restore i tunes
I am getting error 21 when I try to restore I tunes
-
Change home page of an application
How to change home page of an application ?
-
Upgrade SM 7.0 to EhP1 - Windows service SAP SID _ inst.no does not start
Hi gurus, I have to upgrade our Solution manager 7.0 (Windows 2003 32-bit, NW 7.0 SP15, Kernel SP185, non-unicode) to the latest SP of EhP1. I downloaded the upgrade and update guides and followed them. 1. Updated to SPAM 700 SP38. 2. Stopped the ser