HT200199 Still not seeing AVCHD in Aperture 3.3

I upgraded to 3.3, but I still do not see my AVCHD files when I try to import them (Canon m2ts files).  I tried changing the file extension to mts or m2t, but no luck.  Clips are not 1080p60 or 1080p50.  Any ideas?

I have some AVCHD files captured on a Sony RX100 at 50 frames per second because I want the option to slow the clip to 25fps for smooth slow motion.
While Aperture does appear to import these (I suppose unorthodox for Aperture?) 50fps files, I am unable to do anything with them:
A quick look at the file info related to an "MAH03115" for example, indicates it is a 22.6 MB MP4 file that Aperture describes as "Unsupported Video Format".
Aperture suggests I open these files in Quicktime Player so I tried this and discovered I can export from Quicktime to 1080p, 720p etc. and import these back into Aperture. Seems a roundabout way to get things done.
The above seems aroundabout way to get clips into Aperture then it's a one step process in rival Adobe Photoshop Lightroom:
Just an aside: Are their rumours of Apple's intention to merge FCPX and Aperture into one application?
I suspect exporting at a lower quality format recognised by Aperture may be the answer, for now, but I'd be degrading existing files and wasting a lot of time.
It is especially frustrating as Lightroom had no problem importing similar clips shot at 50fps or in non-DVD non-Bluray formats available on the Sony RX100. Very straight forward. No extra steps necessary.
Lightroom feels a bit "busy" or cluttered for me and I found putting slideshows together more cumbersome than in Aperture. I am also more familiar with building photo books in Aperture and this feature also looks a bit cumbersome in Lightroom.
I switched from Aperture to Lightroom (with Premiere) and back to Aperture again because the Apple fiels (the photos/videos) and applications appear to be more seamlessly integrated and accessible... mostly.
When I was using Adobe, I had to export files (to the desktop) from Lightroom and import them into Premiere. Maybe I should have been using bridge.
I also felt Lightroom and Premiere slideshows were cumbersome and did not even try making photo books in Lightroom because it appears less intuitive.
Any tips appreciated. Many thanks.

Similar Messages

  • HT4759 i'm trying to access my new icloud email acct from my mac. I have OS X 10.6.8 and have just completed a software update. But still not seeing how to install my icloud email...?

    i'm trying to access my new icloud email acct from my mac. I have OS 10.6.8 and have just completed a software update. But still not seeing how to install my icloud acct...?

    You must upgrade your OSX to Lion (10.7) minimum, Mavericks (10.9) preferably.

  • Anyone still not seeing the update?

    I feel like I'm the only one not seeing the 4.x update...!?!! It's still telling me that 3.2.2 is the updated version (I'm currently on 3.2.1) instead of letting me know about 4.2.1!!
    It's been almost 24 hours since the release, and it seems like everyone else has it....??

    Thanks for this! I was getting thrown off by the fact that every time I would launch iTunes/connect iPad, the (outdated) message would pop up and I thought it was checking for updates at that moment.
    Downloading 4.2 now....

  • Help! Computer still not seeing Apple TV

    No matter what I do, my computer is not seeing my new Apple TV (got it used). I have a ATT Uverse modem and both my G4 (OS X 10.4.11) and the Apple TV are plugged into it. They can both connect just fine, but the computer is not seeing it when I go to preferences>Apple TV. Both iTunes and the Apple TV have the latest software and I even reset the Apple TV to factory settings and re-installed iTunes. I even went so far as to use a wireless modem plugged into one of the Ethernet ports on the back of the Uverse modem and connected both my computer and Apple TV to that modem so they are on the same network.
    Is there something I am missing? No matter what I do it is not working

    While I have a PC, I went through exactly the same problem you are having. No matter what I did, I could not get it to see the device. After clicking on pretty much every possible link, I found a message stating iTunes could not see Apple TV because the Bonjour service was not enabled. Only problem was ... there is nowhere to enable Bonjour + searching for this word through Apple's help had no results. It wasn't until I Googled it that I found a link to download the program (which the book never mentions by the way). The link ironically leads back to Apple's site. Once downloaded, it saw it immediately and worked fine. While a Mac is configured different, it sounds like you need the Mac version of this software.

  • Still not seeing times in week view

    *I still have not gotten a solution* to why the hourly times (eg 8 a.m., 9 a.m., etc.) no longer show in the left column of iCal in either the daily and weekly screen views. Only Noon shows in the column under the year header (2008).
    If I print a calendar for any of the three views, the times DO show on the printed page as expected.
    The problem showed up on this machine after the upgrade to 10.4.0. Dates do show on another machine on the same home network running 10.4.11. It is a basic iMac with only the fonts that came with it or software installed.
    I have removed the iCal prefs as suggested in a previous post, but that had no effect. I have adjusted my prefs to the day range and hours to show at a time and there were no changes. My pref setting are exactly the same as the other computer that shows times.
    I also removed iCal yesterday and reinstalled the program from the Tiger OS disc. No change.
    It is not the font conflict that causes the date of the dock icon to be misaligned (when don't use the Apple Helvetica). I have turned off/on fonts in font book to check. I have over 400 font families, but normally only about 50 families are active.
    *I have been trying for since November 2006 to get a solution to this*. Does anyone know?
    The closest Apple store is over two hours away and when I did visit it once, I was told I had to make an appointment on a future day to see a Mac expert.

    Greetings,
    The calendar will always have all 24 hours on it. What you can do is set the number of hours you want in the day, in preferences, which will scale the hours for you, then slide the screen to show the hours that you want, and then quit iCal. Restart it, and it should come up with the same view that you left with. This way it looks like just the hours you selected.

  • PE7 Not Seeing AVCHD Camera

    Hello, all,
    Why can't I get content from my new Canon VIXIA HF10 as an AVCHD device on PE7? I'm able to manually navigate to the files when I "Get Media" from "PC Files and Folders". But I'm curious why its not recognized as an AVCHD device and if some upgrade/patch would make it recognized as so.
    Scott

    Steve/Daniel,
    Actually, the path you suggest here doesn't work. When I launch the Media Downloader it doesn't recognize the drive that contains the AVCHD content. That drive is recognized by Windows--I can browse to it and pull off the files through explorer. But that drive is not seen in the Media Downloader.
    Susan,
    This is only a minor quirk. I am able to get to the content both through Windows and by using the generic "get media from file or folder" option in Premiere. But that isn't as slick as the AVCHD browsing I was able to do with my older camera. But it's still possible to get the content and I love the camera, so don't be overly concerned about this.
    Scott

  • Solaris 10 still not seeing all cpus, PROM does screen shot included...

    I installed the new 4x400 mhz cpus and vrms. (501-5446)
    .asr reveals all cpus enabled. I can disable them in the prom and renable them no problem. POST shows no issues. The system runs great, but when I do psrinfo I still only get 0 1 3 the exact same set as I had with the old set of 4 300 mhz.
    All of these are matching serials, and no matter what combination I only see 0 1 3.
    Is there some setting within Solaris 10 that is messed up? Is there a way to shut off and turn on cpus at the os level?
    I know there is a way to assign them to jobs.
    Here is a screen shot of the .asr
    http://141.161.196.100/screen.png

    Well this is a mess. So this is what happens...
    2 alone works fine.
    2 and 3 alone works fine.
    Add 0 or 1 to the mix and immediately 2 drops out.
    So
    0 1 = 0 1
    0 1 2 = 0 1
    0 1 2 3 = 0 1 3
    1 2 = 1
    0 2 = 0
    0 3 = 0 3
    1 3 = 1 3
    2 = 2
    2 3 = 2 3
    And I shuffled the cpus again before I started.
    At the OBP level, everything is always showing what it should.
    Considering how long it takes for this small airplane, I mean e450 to start up, this troubleshooting is a pain.

  • L&T not seeing AVCHD footage from Panasonic SD9

    Hi, all,
    I have a Panasonic SD9, with which I've shot several hours of footage. I've made disk images of all the cards, and they're on an external GRaid HD. I'm running an 3.06 GHz iMac Intel Core 2 Duo with all the latest updates to both Leopard and FCP (6.0.6). I've also got Perian installed.
    My issue is this: When I open Log and Transfer, FCP doesn't see any footage on the disk images (or off the camera when I attach it directly). No clips appear in the window. I know that they images are correct, because I've transcoded the same footage using my laptop without issue.
    An additional tidbit is that about 5 minutes after I open L&T to try to transcode, FCP crashes. It happens every time, regardless of whether I leave the window open or not.
    I've turned Perian off and on. No luck. I've deleted all preferences. No luck. I've reinstalled FCP. No luck.
    Thanks in advance for all of your thoughts and suggestions. Here's to hoping we can figure this one out.
    Best,
    Paul

    Do you have an old version of [FX Factory|http://www.noiseindustries.com/support/fxfactory201> installed of which you are not even using.
    Either uninstall it or [install a newer version|http://support.apple.com/kb/TA25088?viewlocale=en_US].
    http://www.noiseindustries.com/support/
    G.

  • 08/05/15 And I'm still not seeing a solution to the " - " in the capacity window of my MyCloud Drive

    Has anyone come up with the answer?  I've rebooted, rescanned, re uploaded, and the only thing that worked TEMPORARILY was a factory rest.  As I uploaded my files back to the drive few at a time the capacity would show, change, go to a dash, show again, and then at one point after uploading a certain number of files to the drive the " - " just started hanging around and now that's all that there is.  The drive shows Scanning as being in the Idle state. It worked fine for a long time and just started this **bleep** after I began uploading a bunch of files.  Answers anyone?  Mac OS 10.10.4  

    Maybe you should try contacting WD's Technical Support about this. You can do so either by phone or email.
    To Contact WD for Technical Support
    http://support.wdc.com/contact/index.asp?lang=en
    Support by Country
    http://support.wdc.com/country/index.asp

  • HT4407 my MBA is running windows 7 Home, 64 bit but windows is not seeing key hardware, i.e. network&sound. I followed the Apple directions "Installing Windows 7 drivers" and still no joy. Any help would be appreciated.

    My MacBookAir is successfully running Windows 7 Home, 64 bit but Windows is not seeing key hardware i.e. network,sound and
    camera. I have followed the Apple directions "installing Windows 7 drivers" and Windows is still not seeing hardware. Any Help would
    be greatly appreciated.

    Yes, I had MBA burn Apple's Window support software to a DVD. In Windows I am getting "Hardware not found" and during another attempt (using windows's update driver) "driver not found".

  • Scanjet5370C Windows 7 Pro does not see Driver!

    I am trying to add the Scanjet5370C scanner from my windows XP computer to my new Windows 7 professional. I downloaded the software from HP's site and restarted computer. It says device has no driver. I un installed driver tried to reinstall it still not seeing it. Does anyone have an idea whats wrong here?
    Windows update does not even have the driver for this scanner.
    Help!
    thanks in advance.
    This question was solved.
    View Solution.

    Hi Marcus25,
    Sorry to inform you, the Scanjet 5370c is not supported on Windows 7:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03403550&tmp_task=prodinfoCategory&cc=us&dlc=en...
    The driver listed on the HP site is intended for another model (Scanjet 5590) and seems to be wrongly pposted for your scanner.
    I have reported this issue in order to get it corrected..
    Altthough it is not officially supported, you may try the 3rd party VueScan application which seems to support your scanner wthout the need to install any drivers on the computer:
    http://www.hamrick.com/vuescan/hp_scanjet_5370c.html
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Can not see events screen on the left when open iphoto

    I am unable to see the events and other folders that usually are on the left side. I tried to refresh all of the thumbnails etc but still not seeing the events. When I go into time machine it appears but when go to main screen still unable to see. Anyone else ever have this problem?

    Welcome to the Apple Discussions.
    Move your cursor slowly to the extreme left of the iPhoto Window until it becomes a ‘+’. Then click and drag right.
    Regards
    TD

  • K7T266 PRO2-RU - win2k does not see big hdd

    Hi,
    I recently bought and installed a WD 160 GB disk on my computer (see below for details).  My problem is that I can't get win2k to see the new disk.
    I have searched for information on this subject and tried a few things but nothing seems to help.
    Some more info:
    1) I don't want to run RAID for the time being.
    2) I have removed the jumpers from both disks.
    3) FastBuild sees the both the old 80 GB disk and the new 160 GB disk.
    4) I defined one partition with GDISK using the whole disk.
    5) I also tried to define a partition of 80% (i.e. less than 137 GB), but this didn't help.
    6) I have created a raid array for each of the disks.
    7) FastCheck does not see the 160 GB array, only the 80 GB one.
    8) However, FastCheck does see the 160 GB disk on channel 2 of the FastTrak 1 controller, but reports 0nly 127.999 GB.  The location is reported as "Available" while the location for the 80 GB disk is reported as "Array 1".
    9) Windows 2000 and Red Hat 9 are installed on the 80 GB disk.  The boot loader is Grub.
    10) RH sees the 160 GB disk, and I can mount, write to and read from it.
    11) I have defined the "EnableBigLba" registry parameter and set the value to 0X1 (Microsoft Knowledge Base Article 305098).
    Anybody have any ideas?

    Hi again, and thanks for your continued interest!
    I flashed 3.6 but same situation; could still not see 160GB disk.
    I have win2000 with SP4 so that should be ok.
    I defined 2 arrays in Fastbuild and 2 arrays are reported by FastTrak bios. Array 1 is 79999M and array 2 is 160041M.  Both have a status of "functional".
    Each disk is on a separate cable, connected to IDE3 (80GB) and IDE4 (160GB).  Jumpers have been removed for both disks.
    I created a partition and formatted it, first the full disk, then 80% and finally 15%, as it is now.  I used gdisk (Norton ghost utility) to do the partitioning (booted from win98 diskette), and the disk is in the same location as it is now, i.e. connected to the raid controller, and without jumper.
    I have installed and run the FastCheck utility (downloaded from Promise and not from the driver diskette).  (Assaf, is this what you mean by "promise array management utility"?)  The utility shows only one array, WDC WD800BB-75CAA0, but in the Controller tab 2 channels are reported:
    -- Channel 1 = WDC WD800BB-75CAA0,  size: 74.504 GB,  location: Array 1
    -- Channel 2 = WDC WD1600JB-00EVA0, size: 127.999 GB, location: Available disk
    So, FastCheck does see the disk but only just...
    I hope I have answered all questions so far!

  • Aperture not seeing iPhoto Libraries on external drive when trying to do a REFERENCED import.

    I am trying to bring all my iPhoto libraries (one for each year) together into one REFERENCED Aperture library.  I have the iPhoto libraries on an external hard drive and want the Aperture Library on my main drive.  Whe I go to the Import window I do see my external hard drive on the list of drives, but the files do not show up.  It shows folders and any readable files in the folders, but not the iPhoto Libraries, which are not in any folders.  I am running out of space on my hard drive, so want to do a referenced import, not a managed one, but I can't seem to get it to work.  I have tried doing the copy drag and drop method (holding command+option and dragging and dropping from finder to Aperture, but it still copies the whole library to the main drive, it does not reference it).  Help, please!

    Whe I go to the Import window I do see my external hard drive on the list of drives, but the files do not show up.
    Aperture will not show you files in libraries in the import panel.  iPhoto libraries are not imported using the import panel. Importing the files using the import panel would result in importing a mess of thumbnails, previews, and originals, and you would lose your organisation in events and albums and probably  most of your metadata tags.
    You import iPhoto Libraries as library:
    File > Import > Library
    If the library you are importing is referenced, it will be imported referenced, if it is managed, the images will be imported managed. You can relocate the managed originals to your external volume directly after import using the command "File > Relocate originals"
    See: Aperture 3.3: How to use Aperture to merge iPhoto libraries
    Regards
    Léonie

  • HT201269 itunes cannot see my iphone backup.  I have a backup of the backup on an external HD, but even tech support cannot figure this one out.  I copy and paste backups into the correct folder but itunes still does not see it.  All I need are my contact

    Sorry for short novel I am writing.  I just wanted to cover as much backround as possible.
    So, here it goes.  I backed up my iphone 4 after renting a movie.  The movie only played the starting credits before I was called on for daddy duty.  A few days later the movie would not play, so I restored my phone from my backup.  The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie.  I then had a problem with my contacts showing up twice in the contacts list after the restore.  So I attempted another restore.  All was well at this point.  I then started having trouble with my pc and decided to copy the internal drive to an external source.  A week later I had a system failure and did a factory restore on my computer.  I re-installed itunes and tried to copy and paste the old backup into the new itunes.  Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh).  Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck.  The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine).  We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive.  Ok, this is where it gets weird.  We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files.  Whoohoo, itunes now see's a backup folder full of old files, or so we thought.  The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders.  When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored).  This left tech support and I both scratching our heads.  My service issue was escalated to the next level.  I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through.  As usual, apple disappoints again.  I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s.  I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files.  Any ideas or support in retrieving my contacts would be greatly appreciated. 

    Sorry for short novel I am writing.  I just wanted to cover as much backround as possible.
    So, here it goes.  I backed up my iphone 4 after renting a movie.  The movie only played the starting credits before I was called on for daddy duty.  A few days later the movie would not play, so I restored my phone from my backup.  The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie.  I then had a problem with my contacts showing up twice in the contacts list after the restore.  So I attempted another restore.  All was well at this point.  I then started having trouble with my pc and decided to copy the internal drive to an external source.  A week later I had a system failure and did a factory restore on my computer.  I re-installed itunes and tried to copy and paste the old backup into the new itunes.  Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh).  Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck.  The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine).  We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive.  Ok, this is where it gets weird.  We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files.  Whoohoo, itunes now see's a backup folder full of old files, or so we thought.  The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders.  When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored).  This left tech support and I both scratching our heads.  My service issue was escalated to the next level.  I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through.  As usual, apple disappoints again.  I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s.  I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files.  Any ideas or support in retrieving my contacts would be greatly appreciated. 

Maybe you are looking for

  • Mac Pro - crashed and now won't start up, stripes on screen + kernel panic?

    My computer apparently crashed while the screensaver was up (I was away for 10 or so mins, just Firefox and World of Warcraft in windowed mode running), as it was showing a black screen with a fuzzy whitish line along the top and was completely unres

  • Problem with 'Fade Out'

    As part of an edit, I am trying to both 'Fade In' and 'Fade Out' of a particular video. The 'Fade In' works fine, but I'm having problems with the 'Fade Out'. For some strange reason, while the video part of it fades out properly, the audio that also

  • How to open documents no longer supported by Mac

    I have text files that will not open "Np longer supported by Mac etc" How to open and with what program application. Eudora mail Text Edit Word

  • Using Print Utility on USB Shared Printer

    Hi all - I have an Epson C84 printer connected to the USB port of my Airport Extreme. My Tower (10.3.9) is connected to AEx via ethernet, and my MacBook (10.5.6) is wireless. Both computers can successfully access and print to the Epson. So far, so g

  • Why is Lightroom5 copying both RAW and Jpeg files into the destination folder ?

    Hi all Lightroom experts, I want to copy the RAW files from my SD csrd to my Drobo harddisk. And everytime I did that, Lightroom copied BOTH the raw & jpeg files How do I instruct Lightroom to copy only the RAW files ? Just to disgress a bit, in fact