HT200238 I want to create my profile so the passcode lock setting is inaccessible on the iPads I deploy.

I want to create my profile so the passcode lock setting is inaccessible on the iPads I deploy. In other words, I do not want users to be able to set the passcode on our iPads. Is there a way to do this?

I seem to remember the discussion suggesting to use the Restrictions passcode to prevent users from accessing the passcode - parental controls. I may not remember it correctly. A passcode must be set, then the restrictions passcode is used to set controls on the user. Putting the device into supervisor mode then locks it permanently. That's sort of how I remember it.
Found the discussion link: How do you keep users from resetting ipad

Similar Messages

I want to create a book using the photos in the order I have them in the album I created, but book has them all mixed up

I want to create a book using the photos in the order I have them in the album I created, but book has them all mixed up

the only reported way is to redo the dates in the album and then start the book since books use date order
LN

While creating partner profile, if the partner type is u0093LIu0094 what r the sett

While creating partner profile, if the partner type is LI what r the settings we need to configure?

Hi Chiru,
For a IDOC to File scenario, just follow these steps:-
SLD-
1) Create a Product/Software Component
2) Technical System pointing to R/3 system
3) Business System for the above technical system
In the Repository
1) Import the Software component created in the sld
2) Create a namespace,
3) import the idoc and then create sender data type/message type etc and mapping
4) Mapping Rules is depends on the requirement
In the Directory
1) Create a Scenario /import the business system
2) Create Receiver/Interface determination
3) Create communication channels for sender and receiver
4) Sender Agreeement and Receiver Agreement.
Then the file adapter configuration is depend on the input file format.
Also you need to have Logical destionation created in the XI , and the IDX1 entry
In R/3 Port, Partner profiles etc should be created
Have a look into this document~
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
In addition do the following in XI:
1. SM 59 - Create RFC destination pointing to R3.
2. IDX1 - Create a port for R3
3. IDX2 - Import IDOC metadata.
I hope this provides you a solution.
Regards.
Praveen

When I want to create a new project the view screen on the right is blank ? Since creating a new project, when almost done something happens

When I want to create a new project the view screen on the right is blank ? Since creating a new project, when almost done something happens

Hi
Need more info
• Free space on Start-Up (Mac OS) hard disk - How much ?
• Did You try to trash iMovie pref. file while iMovie is NOT running ?
• Can it be something that corrupt Your movie project e.g. use of alien video codecs or audio file formats ?
(What did You use ? Video-codecs, Audio file formats and Photo file formats ? )
Yours Bengt W

Is it possible to create floating events on the iPad iCal?

iPad's ical recognizes floating events transferred from a desktop, but it does not allow create floating events on the iPad iCal.
The only way is to create those events in the default time zone calendar, which is very confusing,

This might work. Create a whole lot of floating events in iCal on your laptop / desktop and put them at the end of your day. You can do this quickly by creating one event in iCal that is floating and then copying it. You do that by dragging the event with your finger on the Option Key. This gives you floating events in your iCal which you are not using yet. Then when you want to use your iPad just drag one of these events from the end of the day to where you want it and use it.
It should work. I tested it just now on my iPad and laptop and it worked perfectly. I use Lion as an operating system. I don't know for Leopard. I use a weekly view. On Lion you cannot drag from the end of one week into the next. This has been corrected in Lion. I use ONLY floating events as I travel a LOT. It is the best way for me.
For creating floating events on my laptop I don't create new events, I always copy an existing event. This way all new events are automatically floating. It took a little while to get used to it. Now it is second nature to me. Since many events are the same as past events, it also saves time not typing in the event details.
For example I might schedule playing badminton at irregular times in a week. I simply create one event and then drag a copy to the new event's locaiton. It is already floating and named correctly. Otherwise I drag a different event and just rename it.
This does not work on the iPhone / iPad / iPod as you cannot copy events. That is why you need to create extra floating events on your laptop at the end of the day so that you can drag them down when you want to use them.

I have 2 id apple. 1of them don´t recongize my adress in Brazil. I tried to create another account but the ipad refuse it. I´d like to exclude these 2 accounts and creat a new account with my same email. How can I do it?

I have 2 accounts at ID apple. One of them the system don´t recongize my addres in Brazil, I tried to create another account but the ipad refuse it.
I´d like to exclude my accounts and creat another account with my same email. How can I do It?

I don't know if that works on the iPhone, but....
View your SETTINGS and choose ICLOUD. That will give you your cloud settings. At the very bottom it has a delete button. Click it an see what happens. After deleting the account (and potentially loosing data connected with it) you should be able to log in to iCloud using your old id.

I have an ipad 2 and want to put my dvds onto the ipad. i have converted the dvd into an mpeg4 file but cannot get it to open in i tunes does anyone know how i do this?

i have an ipad 2 and want to put my dvds onto the ipad. i have downloaded handbrake and converted the file into mpeg4 file but i cannot get the file to open in itunes

I have the same problem , i've converted my videos to mp4 , by using different programmes and tried to open them in itunes but it didnt .
Some people suggested the following although it didnt help me , it might help you
One suggested to paste the videos that you want in automatically add to itune ( go to your music folder m then click on itunes , then itunes media , and you will find it there )
Others suggested to o to the ontrol panal , then programmes and features m then lick on quick time (. Or itunes) then Change then repair
If it didnt help. And you find another method m please let me know
Thank you

What version of GB is needed to open .band files created in GB for the iPad. I am running GB '08 on my desktop PPC G5 with OS X 10.5.8, so I can't go to GB '11. Any solution?

What version of GB is needed to open .band files created in GB for the iPad. I am running GB '08 on my desktop PPC G5 with OS X 10.5.8, so I can't go to GB '11. Any solution?

jerryfromtorrance wrote:
What version of GB is needed to open .band files created in GB for the iPad.
6.0.2
jerryfromtorrance wrote:
I am running GB '08 on my desktop PPC G5 with OS X 10.5.8, so I can't go to GB '11. Any solution?
although i ran GBX6 under 10.5.8, i do believe an intel processor is required. that means that the only complete solution would be a new computer, i'm afraid.
the best you could do is export each track as an audio file from GBi and drop them into your GBX project

Hi, I want to buy a app on the iPad store, but I don't have a credit card. Any advice.?

Hi, I want to buy a app on the iPad store, but I don't have a credit card. Any advice.?

Buy an iTunes card which are available in many retail locations
as well as on line and redeem it in the AppStore so
you can purchase the app you have in mind. The iTunes
card must be from the same country as the AppStore
you are using which should be the same as your country
of residence.

TS1702 I have recently begun to use Pages and want to transfer a document between the iPad and my PC. I can transfer to the iPad, but not the other way, and am told I do not have sufficient 'privileges'. What does this mean? Also can't use iCloud with Pag

I have recently begun to use Pages and want to transfer a document between the iPad and my PC. I can transfer to the iPad, but not the other way, and am told I do not have sufficient 'privileges'. What does this mean? Also I can't use iCloud with Pages between the iPad and PC, although I purchased extra storage in order to do this.

If you have a PC, you don't have Pages on it. You can transfer Pages presentations to/from iCloud via http://www.icloud.com , however -- you just won't have an app on your PC to deal with Pages documents. Make sure that you have your iCloud account properly configured on your iPad.

Want to create XML tag from the query

Here i want to create a xml output from the below code for the given P_repair_number can anyone help me for the code i have written
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
facing the above error when run from concurrent program
Procedure dfdfdf(p_repair_number number,
                          errbuf        OUT VARCHAR2,
                          retcode       OUT NUMBER) as
v_error_code NUMBER; -- error code
v_error_message VARCHAR2(255); -- error message
v_text_msg VARCHAR2(100);
cursor Rodetails(p_repair_number IN NUMBER) is
SELECT
dra.repair_number,
dra.repair_line_id,
items.concatenated_segments item_name,
items.description item_desc,
dra.inventory_item_id,
sr.incident_number sr_incident_number,
decode(dra.customer_product_id, '',dra.serial_number,cp.serial_number) serial_number,
ltrim(oeh.order_number) rma_number,
rstl.resource_name ro_owner_name,
fndl.meaning flow_status_name,
dra.status ro_status_code,
drtt.name repair_type_name,
dra.problem_description,
dra.promise_date,
rgtl.group_name repair_org_name,
decode(dra.customer_product_id, '',dra.item_revision,cp.inventory_revision) revision,
cp.lot_number,
dra.unit_of_measure uom_code,
uom.unit_of_measure_tl uom_name,
dra.quantity,
cp.instance_number ib_instance_number,
plkup.meaning ro_priority_meaning
FROM
csd_repairs dra,
csd_repair_types_tl drtt,
cs_incidents_all_b sr,
csi_item_instances cp,
fnd_lookups fndl,
csd_flow_statuses_b fsb,
mtl_system_items_kfv items,
mtl_units_of_measure_tl uom,
jtf_rs_resource_extns_tl rstl,
jtf_rs_groups_tl rgtl,
oe_order_headers_all oeh,
cs_estimate_details edt,
csd_product_transactions txns,
fnd_lookups plkup
WHERE dra.repair_type_id = drtt.repair_type_id
AND drtt.language = userenv('LANG')
AND dra.repair_mode = 'WIP'
AND dra.incident_id = sr.incident_id
AND dra.CUSTOMER_PRODUCT_ID = cp.INSTANCE_ID(+)
AND dra.flow_status_id = fsb.flow_status_id
AND fsb.flow_status_code = fndl.lookup_code
AND fndl.lookup_type = 'CSD_REPAIR_FLOW_STATUS'
AND dra.inventory_item_id = items.inventory_item_id
AND dra.unit_of_measure = uom.uom_code
AND uom.language = userenv('LANG')
AND dra.resource_id = rstl.resource_id (+)
AND rstl.category (+) = 'EMPLOYEE'
AND rstl.language (+) = userenv('LANG')
AND dra.owning_organization_id = rgtl.group_id (+)
AND rgtl.language (+) = userenv('LANG')
AND dra.repair_line_id = txns.repair_line_id
AND txns.estimate_detail_id = edt.estimate_detail_id
AND edt.order_header_id = oeh.header_id
AND edt.line_category_code = 'RETURN'
AND dra.currency_code = oeh.transactional_curr_code
AND dra.ro_priority_code = plkup.lookup_code(+)
AND plkup.lookup_type(+) = 'CSD_RO_PRIORITY'
AND items.organization_id = cs_std.get_item_valdn_orgzn_id
AND dra.repair_number=p_repair_number
AND rownum <50;
begin
errbuf := NULL;
retcode := 0;
SAVEPOINT Create_external_orders;
--retcode             := FND_API.G_RET_STS_SUCCESS;
IF (fnd_log.level_procedure >= fnd_log.g_current_runtime_level) THEN
    fnd_log.STRING (fnd_log.level_procedure, 'CSD.PLSQL.XXTNT_CSD_CREATEORDER.SUBMIT_CREATE_ORDER.BEGIN', 'Enter - PrintTraveller');
END IF;
--FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<?xml version="1.0"?>');
--FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<REPAIR_ORDER>');
FOR v_rodetails IN Rodetails(p_repair_number)
LOOP
/*For each record create a group tag <G_RODETAILS> at the start*/
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<?xml version="1.0"?>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<REPAIR_ORDER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<G_RODETAILS>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<REPAIR_NUMBER>' || v_rodetails.repair_number ||
                                   '</REPAIR_NUMBER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<REPAIR_LINE_ID>' || v_rodetails.repair_line_id
                                || '</REPAIR_LINE_ID>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<ITEM_NAME>' || v_rodetails.ITEM_NAME
                                 ||'</ITEM_NAME>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<ITEM_DESC>' || v_rodetails.ITEM_DESC
                                || '</ITEM_DESC>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<SR_INCIDENT_NUMBER>' || v_rodetails.SR_INCIDENT_NUMBER ||
                                   '</SR_INCIDENT_NUMBER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<SERIAL_NUMBER>' ||v_rodetails.SERIAL_NUMBER
                                 ||'</SERIAL_NUMBER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<RMA_NUMBER>' || v_rodetails.RMA_NUMBER
                                || '</RMA_NUMBER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<RO_OWNER_NAME>' ||v_rodetails.RO_OWNER_NAME ||
                                   '</RO_OWNER_NAME>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<FLOW_STATUS_NAME>' || v_rodetails.FLOW_STATUS_NAME
                                 ||'</FLOW_STATUS_NAME>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<RO_STATUS_CODE>' || v_rodetails.RO_STATUS_CODE
                                || '</RO_STATUS_CODE>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<REPAIR_TYPE_NAME>' || v_rodetails.REPAIR_TYPE_NAME ||
                                   '</REPAIR_TYPE_NAME>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<PROBLEM_DESCRIPTION>' || v_rodetails.PROBLEM_DESCRIPTION
                                 ||'</PROBLEM_DESCRIPTION>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<PROMISE_DATE>' || v_rodetails.PROMISE_DATE
                                || '</PROMISE_DATE>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<RO_OWNER_NAME>' || v_rodetails.RO_OWNER_NAME ||
                                   '</RO_OWNER_NAME>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<REPAIR_ORG_NAME>' || v_rodetails.REPAIR_ORG_NAME
                                 ||'</REPAIR_ORG_NAME>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<RO_STATUS_CODE>' || v_rodetails.RO_STATUS_CODE
                                || '</RO_STATUS_CODE>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<REVISION>' || v_rodetails.REVISION ||
                                   '</REVISION>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<LOT_NUMBER>' || v_rodetails.LOT_NUMBER
                                 ||'</LOT_NUMBER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<UOM_CODE>' || v_rodetails.UOM_CODE
                                || '</UOM_CODE>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<UOM_NAME>' ||v_rodetails.UOM_NAME ||
                                   '</UOM_NAME>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<QUANTITY>' || v_rodetails.QUANTITY
                                 ||'</QUANTITY>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<IB_INSTANCE_NUMBER>' || v_rodetails.IB_INSTANCE_NUMBER
                                || '</IB_INSTANCE_NUMBER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<RO_PRIORITY_MEANING>' || v_rodetails.RO_PRIORITY_MEANING ||
                                   '</RO_PRIORITY_MEANING>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'</G_RODETAILS>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'</REPAIR_ORDER>');
END LOOP;
IF(retcode != FND_API.G_RET_STS_SUCCESS) THEN
                RAISE FND_API.G_EXC_ERROR;
              END IF;
              IF (fnd_log.level_procedure >= fnd_log.g_current_runtime_level) THEN
                fnd_log.STRING (fnd_log.level_statement, 'CSD.PLSQL.XXTNT_CSD_CREATEORDER.SUBMIT_CREATE_ORDER', ' In PrintTraveller');
              END IF;
fnd_file.put_line(fnd_file.log, 'Successfully completed PrintTraveller');
EXCEPTION
|| Catch all error.
WHEN OTHERS THEN
ROLLBACK;
v_error_code := SQLCODE;
v_text_msg := 'Fatal Error, Oracle Error is: '
|| TO_CHAR (v_error_code, '99999');
fnd_file.put_line (fnd_file.log, v_text_msg);
v_error_message := SQLERRM;
fnd_file.put_line (fnd_file.log, v_error_message);
end dfdfdf;Edited by: user12053530 on Apr 19, 2010 5:54 AM

However using SYS.ODCIVARCHAR2LIST makes sense if your query is a part of bigger processing (PL/SQL procedure or function) and you will do some processing depending on File_Type, like in this example (not compiled, could contain syntax errors):
DECLARE
l_stid           VARCHAR2(10);
l_address        VARCHAR2(30);
l_File_Type_tab SYS.ODCIVARCHAR2LIST;
cur_cursor IS SELECT STID,
                ADDRESS,
                CAST(COLLECT(DISTINCT File_Type) AS SYS.ODCIVARCHAR2LIST) AS File_Type
                FROM (
                      SELECT STID,
                             ADDRESS,
                             File_Type
                        FROM DUMMY
                GROUP BY STID, ADDRESS;
BEGIN
OPEN cur_cursor;
<<main_loop>>
WHILE (1=1) LOOP
     FETCH cur_cursor INTO l_stid, l_address, l_File_Type_tab;
     EXIT WHEN cur_cursor%NOTFOUND;
     -- Now do processing for each File_Type in l_File_Type_tab;
     <<each_file_type>>
     FOR i IN l_File_Type_tab.FIRST .. l_File_Type_tab.LAST LOOP
       -- for example:
       -- IF l_File_Type_tab(i) = 'SALES'
       -- THEN
       --   do_something(l_stid, l_address);
       -- ELSIF l_File_Type_tab(i) = 'TRANSFER'
       -- THEN
       --   do_something_else(l_stid, l_address);
       -- ELSE
       --   do_something_default(l_stid, l_address);
       -- END IF;
     END LOOP each_file_type;
END LOOP main_loop;
CLOSE cur_cursor;
END;

I have a camcorder that records in the .MOD format. It is a Panasonic SDR-S26 and is not compatible with MAC. I want to create a DVD using the video on my camcorder. How can I do this?

My operating system is OS X (version 10.6.8) and I have a Mac Mini.

Trust me when I say this coming from 20 years of experience.
Get a powered external drive, format it 1 Partition Option: GUID and OS X Extended Journed as the format in Disk Utility.
Download and install Carbon Copy Cloner, clone internal drive to external drive.
Set a schedule to remind you to do it at least once a week, keep it near your charger.
When you plug your charger in, do plug the clone and power the machine up, set the display to sleep only,
CCC will do the rest.
If you want to boot from it, hold the option/alt and select it Startup Manager.
I've seen many TimeMachine and TimeCapsule nightmares and so far haven't seen a problem from anyone using a bootable clone.
It's simple, it's easy, it's more reliable and more powerful than what Apple does and it only takes plugging in a extra cable.
Make as many clones as you want, keep them time seperated, off site etc. etc.
Cables don't have network issues, clones can be verified in seconds merely by booting from them.
Clones protect your productivity, your up in seconds on a clone despite even the hard drive dying.
Software problem? No sweat, boot of the clone and reverse clone your problems away.
If you want to fuss and muss with half implemented TimeMachine and TimeCapsule network headaches then prepare to suffer.
I don't like to suffer, I bought a Mac not to suffer, but it appears you do with TimeMachine and TimeCapsule.
Most commonly used backup methods

Want to create interactive pictures that the viewer can zoom and pan

I want to make every image on this page zoomable on an ipad or iphone or whatever, within their current frame. Found a bunch of useless information about slideshows, but no step by step instruction on how to accomplish this. A
moderator locked down my last question instead of moving it. I hope this one is in the right spot.

No result? Of course not. The preview panel is for SWF export only.
You need to preview it on the iPad or in the desktop Adobe Content Viewer.
Speaking of which, when was the last time you updated the tools?
Bob

How can I transfer Albums created in Fotos in the ipad to the mac?

Hello,
I created an Album in Fotos app in the ipad with some pictures I had previously imported from the mac, once edited in the ipad.
Now, I want to transfer the album back to the mac, but to my suprise, it does not syncronize.
How can I do it?
Thanks

Use an app like photo transfer.
See here:
Photo Transfer App - Easily copy, delete, share and backup pictures and videos over wifi between devices and computer by ERCLab, LLC
https://appsto.re/us/SQ8Wv.i

Is there a lens correction profile for the IPad Air 2 in LR available?

I would like to use the lens correction in LR on pics I took with my IPad Air 2.
Is there a profile available?

There are no profiles available for any Apple iPads (There are a few for iPhones only).
I checked through the Adobe Lens Profile Downloader software and no profiles listed for Apple devices there either.
Your choices would be to wait and see if Adobe ever adds a profile or to create your own using the Adobe Lens Profile Creator .
See the profile list and link for the Lens Creator software here:
http://helpx.adobe.com/x-productkb/multi/lens-profile-support-lightroom-4.html
Bruce

HT200238 I want to create my profile so the passcode lock setting is inaccessible on the iPads I deploy.

Similar Messages

Maybe you are looking for