HT201210 i have updated my ipad and now it has a passcode that i have not set up and do not know the passcode for. my ipad is now disabled. what do i do!
i have updated my ipad and now it has a passcode that i have not set up so i do not not have the passcode to put in and now it is disababled! HELP!
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.
Similar Messages
-
It connects to internet fine. I have tried restoring back to factory condition and hard wire update by connecting it to my Mac mini .
The date and time won't set. And won't acknowledge my Apple ID and password......... I am usually tech savy but this has caused me grief .
Do I need to downgrade my update....
But can't get any menus until I log in my apple account...
It can't log into my iTunes account until time and date have been set.
When I did the hard wire restore connected to Mac mini it wouldn't go past the date and time screen as it wouldn't when I did the wifi update too.
it just would get past that screen.
Anyone help!!This is the result of a network issue. Ensure port 123 on the router is open.
-
I am not able to access my Ipod using the email address because it has been deactivated.
Recovery the password and change the ID email address
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. See Changing your Apple ID password if you'd like more information.
I no longer have an email address that was also my Apple ID. Can I still use the email address as my Apple ID?
Apple recommends you change your Apple ID to your current, working email address. This will not create another Apple ID, it will only change it to your working email address. See Changing the name you use for your Apple ID if you'd like more information.
If necessary:
Forgotten Security Questions/Answers
You need to contact Apple by:
1 - Using this form
Apple - Support -form iTunes Store - Contact Us
2 - Call Apple in your country by getting the number from here:
http://support.apple.com/kb/HE57
3. Contact Apple by:
Apple ID: Contacting Apple for help with Apple ID account security
For general information see:
Apple ID: All about Apple ID security questions -
my friend gave me her ipod about 2 years ago. neither of us know the passcode and now we have no way to link it to the original itunes account. is there a way i can reset it so i can use it?
I have tried plugging it in and holding the sleep/wake button and home button at same time and all it does is gives me the "slide to power off" option. Is there anything I can do??? Please Help!
Message was edited by: Unordinary92Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Or try using this program to place the iPod in recovery mode
RecBoot: Easy Way to Put iPhone into Recovery Mode
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer -
Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help with this, please.
jpg does not support Layers.
Just to make sure, what exactly do you mean by "stacking photos" and what do you want to achieve thereby? -
How do I delete an iCloud account from my iPad that I no longer know the password for and have no access to the email account to change it?
You will need the password. If you can't get it reset via http://iforgot.apple.com (if you remember the answers to the account's security questions then you should be able to reset it via them) then try contacting Support in your country, they should be able to reset it.
Contacting Apple about account security : http://support.apple.com/kb/HT569
If your country isn't on that page then try this form and explain and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html -
Sorry but i have a problem my IPAD has been stolen and i want help to know where is the place of it ? can i send the serial number or anything i want help to know the place of my IPAD and thanks My name is :- Osama Rezk I'm From :- Egypt my icloud ID
<Email Edited by Host>You will only be able to track your iPad if you have find my iPhone active and the iPad is connected to a network.
Take a look at this link, http://support.apple.com/kb/PH2580 -
My ipad is disabled, I dont know the passcode and I dont have a computer to connect to itunes... is there anyway of reactivating ipad without connecting to itunes?
Sorry but no. You will need to get access to a computer with iTunes somewhere to restore the iPad. You can get help with this at an Apple Store if you have them in your area. Note that if you haven't backed up your iPad to iCloud, you'll lose all your data. Apps and other purchases from the iTunes Store can probably be re-downloaded.
Regards. -
I have an old i phone 3G and do not know the password for it. trying to restore it from itunes so my daughter can use it as an ipod but keep getting error code 1015, any help on how to get passed this please?
Hi ratcat14!
I have an article that can help you troubleshoot this issue:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden -
I have two options in my apple contacts. And I chose to not expose my hotmail contacts to limit the length of my list. Now whenever I add someone they get saved to my hotmail contact list, rather than iCloud. How do I change this?
Settings>Mail,Contacts,Calendars>Default Account (in the Contacts section), set this to iCloud.
-
I've updated my iPhone 6 with iOS 8.3 after that i have lost all iCloud shared albums on phone but i sill have those albums on mac book and on phones of people i had shared with
You need to update iTunes to 11.1 on your PC
-
So I have an iphone and for some reason I don't know the password for my Apple ID so I can't download apps and I don't have the password to my email to change it and I don't know the secret questions , what can I do to make a new Apple ID ?
I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option? -
Hello, my name is Karan Taneja and i have been a loyal Apple customer.
I have been using Apple since it introduced iphone 4 and have been upgrading/buying every new phone Apple introduces after that.
I was always happy and surprized to see Apple doing so good to its customers.
Unfortunately, i experienced some thing really unprofessional and different this time.
It begun suddenly one day when i tried to charge my phone, the phone was on silent mode and as usual the phone vibrated when i kept it for charge.
After a few seconds the phone vibrated twice or thrice again when i re-inserted the cable thinking it might be loose.
It continued to charge well when i left the room for 2 hours and finally when i returned i could see a damaged i phone 5
lying on the floor and the phone vibrating continuously and i figured out there was a fault with the cable and the
current wasnt flowing continuously due to which the phone continued to vibrate and fell off the shelf.
Next day i took the iphone to Apple service centre at Saket which was closed.
Thinking its August 15 and so the store might be closed i went back to home and waited for the next day but unfortunately could not turn up since
i had to go to work on odd timings.
I again went to the same service centre on 17th August 2013 and saw the service centre closed again when i tried to contact
the other service centre and was informed about Saket's service centre already been shut down.
There was no hoarding/ banner any kind of intimation for the customers.
Since 18th August was Sunday and i was occupied on 19th August i went to service centre at Ansal Plaza Khel Gaon Marg on
20th August 2013 to complaint about the Faulty Cable and the damaged caused to my iphone 5 due to the same.
I very well explained the same to one of the person at the receiving desk at the service centre who accepted the cable
but explained me that he doesnt have the authority to accept my iphone without permission from the technical support people
who will be able to help me in that case and gave me the toll free number.
i Tried to reach the toll free number and finally managed to get online with a technical support executives who too all my details and
summary of the problem i experienced and finally kept me on hold for almost 10 minutes ormore after which he said he said that my
case cannot be considered and while the discussion was on, the call was disconnected and i was left frustrated as i still was at the service centre
but finally i left with no hope from Apple .
I tried to reach again at the toll free number, and finally managed to talk to a well behaved person who assured me of considering my case and suggested
me to go back to the service centre and advice the the person at the recieving end there to get me connected to the technical support team when i reach so that i could
submit my phone but, since, it was already around 4:30 and the service centre was about to shut and due to traffic
conditions all around i thought of visiting the service centre next day.
On 21st August 2013, i went back to the service centre and spoke to the one of the store person who adviced the case to the manager Mr. Alok ( as i remember )
who was really rude to tell me that i will have to call the technical support team on my own and then he will connect and that its not his work and all that .
I finally connected to one of the senior technical support executives Mr.Mohamed Azharuddin K who understood my concern and spoke to the manager of the store to accept
my iphone.
My iphone was finally collected and i was assured i would get a call back next day from the service centre about the update.
It was now 22nd August 2013, no update was given,no call was received, i tried to call the service centre at 12:30, they were unaware about my case and knew only about the cable and said will call me
back very shortly.
I called back at 2:30, still no update, at 4:30 i called back again when i was told that my case cannot be considered and i can collect my phone.
Similar discussion was held with Mr.Mohamed Azharuddin K.
I knew by the time i will reach the service centre would again close.
He told me that my case cannot be considered since the cable was recieved in the dead condition and wasnt working at all unlike what i told him about the cable.
On 23th August 2013, i went back to the service centre and collected my phone. When i asked about my old cable and told them that it was working and i wanted the technician
to check it properly when i handed it over, they had no answer but to say its already shipped. I spoke to the manager who said that he never told any body that the cable
was received in dead condition and he only conveyed to other authorities that the cable had fault .
I finally dont know what to do and came back with the new cable.
I just visited my time, petrol and parking charges in getting the cable replaced.
If i calculated i have spent around 16 hours and 2000 worth of money in just getting the cable replaced and have a broken phone in hand.
More than a weeks torture.
Is that the way apple compensates for its fault ????????????????
I will make sure that i never buy any thing from Apple and advice all the people i know to not trust Apple blindly.Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off. -
My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Revision: 9287
Author: [email protected]
Date: 2009-08-13 15:53:43 -0700 (Thu, 13 Aug 2009)
Log Message:
Fixes bug with shader-transition effects (AnimateTransitionShader, Wipe, and CrossFade) when acting on targets that either have filters or are inside a hierarchy with filters. Fix was to capture the bitmap snapshot of the target without any of its own filters applied and to then use the ShaderFilter in conjunction with the target's filters during the animation.
QE notes: Probably need more tests in this area, now that we handle it
Doc notes: none
Bugs: sdk-20250
Reviewer: Jason
Tests run: Checkintests, Mustella (spark/effects/[AnimateTransitionShader|Wipe|CrossFade])
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/sdk-20250
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/AnimateTransitionShader.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/supportClasses/AnimateTransiti onShaderInstance.asLots to be excited about. BUT...Just updated to 8.1 on one of my computers to test it out...
Sadly, the following issue is NOT fixed for me. Is it with new projects only? I haven't started a new project on 8.1 I've only opened an old project but the issue that I'm referring to which involves also a delay/freeze of anywhere from a few seconds to a MINUTE while the render bar goes from yellow to red and then back to yellow is still there. Boo.
On the list above...
Switching between sequences can turn the render bar red.
This issue is incredibly easy to replicate. I really do hope it gets fixed. Here are the steps:
1) Create two sequences with multiple short clips (the more clips the better)
2) Make sure GPU acceleration is enabled.
3) Add warp stabilizer to the clips in both sequences. Again, the more clips the longer the delay/freeze will be as the render bar goes from YELLOW to RED and then eventually back to YELLOW again.
4) Hit SAVE.
5) Now, toggle between sequences. You'll hit a short delay with a few clips stabilized and a LONG delay with lots stabilized. In my case this delay is around a full minute. The render bar will go from YELLOW to RED and then back to yellow...eventually.
6) Toggle back to the original sequence and the delay occurs again.
7) Once you've toggled between sequences and have gone through this delay, that's it, there is no longer a delay...UNTIL...(and here's the big kicker)...until the project is SAVED again. After that the issue returns when you toggle between sequences. Both saving manually and AUTOSAVING cause this issue. No way around it except not editing with GPU acceleration.
Not sure what the issue is...caching issue when saving maybe? Either way, it stinks and it's still there in 8.1. Big bummer.
Again, lots to be excited about with this release but I really was hopefully this specific issue was resolved.
Sigh.
Maybe you are looking for
-
[OT] Logging each logout from shell/telnet/ssh in Solaris 10
Hi, excuse me for OT, how can I logging each logout on a Solaris 10 X64 and/or SPARC. Regards.
-
How to track the fast movement camera (close shot)
the shot is close to green screen and fast movement and camera cut off from the markers. any ideas how to fix this ? i knew i mignt need to shoot again but its impossible cuz of the actors are not here anymore. so i must fix it. any recommend plugin
-
I have the following mapping structure.. IDOC ORDERS05 E1EDK01 belnr E1EDK03 IDDAT - 011 DATUM - date E1EDK03 IDDAT - 011 DATUM - date E1EDP01 posex I need to map that to Header (as many times a
-
Copying the error records in a custom table
Hi, I have a report program which is fetching Invoice header and line items . I need to copy the error records (records having a custom field ZZKUNNR as blank) in a custom table . I am executing this report in background daily . The records in the c
-
Premiere Elements 3.0.2 AVCHD-Lite Support???
Typically you will see that Premiere Elements 7 was the first version to support AVCHD (video codec MPEG-4 AVC/H.264). I have seen reported support for AVCHD in an earlier version, Premiere Elements 4, when that program was installed in one of the So