HT201210 I updated my 1Pad2 software yesterday as requested. Now airtime, and sync do not work no matter what I try. This is very frustrating.
Yesterday I was sent a message that I must update my iPad 2. So I updated the software to ios 7.0.4. Now the airplay does not work which has worked forever, and I can not sync my iPad. What is going on?
Where exactly did you buy the "new iPhone "
A country might help as well .This is a WW forum
Are Direct Mobiles an Approved Apple iPhone reseller if not it may well be a fake
Similar Messages
-
I get prompted to do a software update, when I start it I get a message saying my Kaspersky add on will not work and be disabled until they are compatible. The URL adviser and keyboard. Is there a way around this? I don't want anything that affects my anti virus.
First off, updating Firefox won't affect the anti-virus part of Kaspersky, only a couple Kaspersky add-ons for Firefox. Second, check with Kaspersky to find out if or when they're going to have compatible Firefox extensions ready for Firefox 7.
-
After I updated my new Ipad with IOS 6, now Map& Dictation icon are not working. please help me
Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?
-
I have recently updated the new apps via creative cloud now photoshop and bridge no longer work, they open then say they have encountered a problem and close, I also tried opening the old version of photo shop but getting the same result
What OS version? What's the exact error? Exactly when does the error occur? What previous versions? What is on the screen when the error displays? Does Photoshop get fully open?
Try opening Photoshop holding down Shift key immediately to turn off plug-ins. Lots of good suggestions here: Photoshop: Basic Troubleshooting steps to fix most issues -
I have just updated my iTunes to 11.1.3. I followed all correct steps, restarted my computer etc but now I cannot open iTunes not matter what I try and do.
Very frustrating. Have read the trouble shooting info on Apple website but nothing has worked.
Someone please help. I cannot access any of my music.Open Finder. Go to the "Go" menu in the menu bar. Press and hold Control and click on Library. Go to "Preferences". Find a file named, "com.apple.iTunes.plist" and delete that file. This won't delete your iTunes content. It will reset iTunes. Try it again.
-
I updated my iphone 4S to 7.1.1 and now WIFI and Bluetooth do not work.
I updated my iphone 4S to 7.1.1. Immediately after doing this, my wifi is greyed out, (cannot even turn it on), and my bluetooth is not working at all. I have discussed with Apple several times and even went to an apple service center. They claim that I have a HW issue and that I must pay $200 for another phone. HAving been a cell phone HW designer for 15 years, I know this is not true. If this is a HW issue, it was caused by the FW update. There is a problem with my phone that is a direct result of the FW update. If I could go back to the previous version, I could prove it but there is no way for me to do that. So, it looks like iphone has released an update that "breaks" some phones. What an easy way to force people to pay them $200 for a new phone. Hmmm, if other electronic manufacturers catch on to this, we are screwed. Apple has seen the issues on the internet and has seen the issues reported on thier own Communities. They know that many people are reporting the same problem. If I can look it up, anyone can. They know that they have screwed up. So instead of biting the bullet and fixing what they broke, (peoples phones), they are taking advantage of the opportunity to make more money by telling people that they have a HW problem that they are not responsible for and that it is going to cost $200 to fix what Apple has screwed up. Just let me go back to the previous version of the IOS and my phone will work again. Is anyone else having this same issue? Has Apple lost it? I have been more than pleased with my phone. I have been thrilled with customer support. What is going on with apple? Samsung is looking better every minute.
Even if it is a hardware problem they should fix it regardless of warranty. If you buy a car and after 1.5 years the doors fall off due to a failure in their design and construction, do you think the car manufacturer could pull off what Apple is trying to do? Yes the car still delivers its primary objective of driving from A to B, but significant functionality has been lost due to their fault.
It is the same with this iPhone wifi problem. Apple are a disgrace, I have had significant Apple Hardware failures with my MacBook Pro and iPhone within 2 years of purchase. Pathetic quality. -
I've just updated software on my Mac and synched to my Ipad 2. However, the first time my ipad asked for my password (which used to be 4 numbers) and I entered my usual numerical password, it told me it was wrong. I tried entering my apple password but now I am locked out. Help :-(
How did the photos get onto the iPad ? If they were synced from a computer then they won't appear in Image Capture (or iPhoto or Aperture, and on a PC windows camera wizard and windows explorer) - there are third-party apps such as Simple Transfer which you can use to copy those back via your wifi network (but photos are 'optimised' when synced to the iPad, so if you do copy them back they may not be exactly the same as they originally were on your computer).
If you have photos taken with the iPad, copied to it via the camera connection kit or saved from emails/website then the iPad should appear in those applications so that you can then copy those photos off the iPad. -
Updated IDT Audio Driver now sound and microphone are not working Hp Elitebook 8540w
Hi,
I updated my IDT audio drivers using the HP Support Assistant now I cannot get sound or microphone working on my laptop. the windows volume control shows "No Audio Device is Instialled" although I can see IDT High Definition Audio Codec is installed and enabled in the device manager. I have tried rolling back the driver and updated BIOS and chipset, but the issue persists.
my system:
HP Elitebook 8540w
running Windows 7 Pro
Help pleaseHi AndrewBC,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums. I would try.
1. Right click speaker icon (right hand corner)
2. Select Playback devices
3. Right click Speakers
4. Enable it and set as Default
5. Click Apply/Ok
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
TS1398 hi,i have just update my soft wear but my wifi is grayed and wifi button not working
Hi, I have just update my iphone but my wifi grayed and not working
APPLE PLEASE!!!!!!
WE NEED ANSWERS!!!!!
WHEN YOU WILL FIX IT THIS HUGE ISSUE!?!?!?!?!?!?!?!!?
I LIVE IN BRAZIL AND HERE DON´T HAVE AN OFFICIAL APPLE STORE!!!!!
WE NEED A SOLUTION FASTER!!!!!! -
I tried to update my ipod touch to ios7 and it forced my ipod into recovery mode. i have tried to restore the ipod as well as turn the recovery off as well as use tinyumbrella and nothing worked. How can I get my $300 ipod touch to work?
Without knowing what happened when you tryed to restore:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I already had an iTunes account when I pushed the iPhone. After upgrading the OS to 5.0.1, I kept receiving an error message saying that my AppleID was invalid, even though it worked perfectly within iTunes on my PC. It seemed to want my email address as my "new" AppleID so I entered that, but it created a second ID. It seems my cloud account and the "phone" iTunes is attached to the newer ID and my "PC" iTunes account is attached to the older ID.
Now, when I try to sync iTunes, I don't see all of the songs I purchased, some sync and others appear to sync but are grayed out with the sync icon next to the title. The songs are still on my phone, but not in my iTunes library.
Is there any way to fix this and consolidate the accounts? Also, why did the upgrade force me to create a new AppleID? I haven't upgraded to the 4 or 5 phone because I'm afraid this is going to happen again and I'll have a third AppleID to contend with.
Thanks!!There is no way to consolidate iTunes accounts.
Setting up an iPhone has never required creation of a new Apple ID.
You've apparently purchased content with both Apple ID's. Sign into the device with the correct Apple ID and sync the content. -
I have used your help processes and done everything that is suggested - repeatedly. I don't know what else to say. Whenever I go to a site requiring the use of adobe flash, the system freezes up for a couple of minutes or more and then it says that Flash has crashed. I have sent the crash reports multiple times. When I use Internet Explorer, I have no issues with Adobe Flash. I have Windows 7 64bit installed.
I had loads of problems with iTunes, could see all but it would not respond at all.
I downloaded Abexo free registry cleaner and Errorkill registry cleaner free for limited period with restrictions. I ran both and got rid of all the junk in the registry and then installed QuickTime standalone...all problems solved. May need to reinstall itunes AFTER Quicktime if this does not work.
Hope this helps. -
appreciate any assistance
I had also faced the same problem. After weeks of hunting, I found many apps compatible with ios 4.2.1
Gun Bros
Super KO Fight
Gravity Guy
I Must Run
Men vs Machines
Hit Tennis 2
Optime Games
Air Hockey Gold
Real Tennis
Football Kicks
Frisbee Forever
Spy Mouse
Ninjump
Office Jerk: Zombies
The Walking Dead
Angry Birds
Angry Birds Season
Office Jerk: Holidays
Real Skijump
MotoGP 2010
Real Racing GTI 2010
Asphalt Audi RS 3
GTA Chinatown Wars
Max Adventures
Samurai Dojo
Deer Hunter Challenge
Cricket: Defend the Wicket
Airport Madness Control
There are lots more...Some of these games will probably be unavailable as it must've been upgraded
Also check out this site: https://sites.google.com/site/appleclubfhs/support/advice-and-articles/finding-a pps-for-older-devices
Hope this helps! -
I have an ipod 4 with iOS 5 and then ran an update with the 5.0.1 and it is not working
i have an ipod 4 with iOS 5 and then ran an update with the 5.0.1 and it is not working, i got an error message
This device is not registered as part of the iPhone developer proraom . ##br####br## if yuo are member of the program.,please register your device in ..you can update over the air with strong wireless signal, or by connecting to a computer running iTunes. Either works well. If you do the update over the air, be sure and attach your iPhone to a wall outlet so you have a solid power supply and don't risk the battery dying during the update.
The iTunes approach installs a much larger file because of the connection, but if you have not updated since 5.1 that might be a better approach...replace the entire operating system instead of patching.
Either way, backup the iPhone yourself just for your own protection in the off-chance something should go wrong...a little paranoia while updating is a good thing -
Just updated to 10.9.4 and mail is not working?
Just updated to OS X Mavericks 10.9.4 and mail is not working?
Any advice appreciated.Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).
Maybe you are looking for
-
When I click send link my yahoo programme will not let me acess yahoomail
when I click send link my btinternet mail facility no longer works and just keeps asking for my password. when I give it it has no email pop up to send link and this process is just endless. I have had to use the computer default now but I would like
-
How to save data in a report?Urgent...
hi all, I'm doing a project in java to create report generator..After creating a report i have to save the report..For that i have to save the datas & the program to execute the data..My doubt is that how i would store the data?.According to my idea
-
The title describes my problem. I stopped using my old computer, and when I went to sync to my new computer, a playlist I had is still on my iPhone 5. These are not songs purchased on iTunes. I tried to swipe erase them, but that caused the phone
-
Connecting Firewire to Mavbook
I have an external hard disk am using with my iMac. It uses a cable with a fairly standard looking connector at the iMac end. I would like to use this hard disk with my MacBook. Do I need any kind of adapter to match the cable to the Macbook? Or, doe
-
No connection possible to BI master system SAP_BW
Hello We are using the BEX query designer (BI 7 version). When we open a query in design mode and we then click on the Execute button, we encounter an error as follows:# - internet explorer opens up - we are prompted to enter a user id / password -