HT201210 I was doing an update on my iphone and it stopped short of getting it all the way done. Now my phone is stuck with an itunes icon on the screen, and will not allow me to do anything with it. I tried shutting it down and restarting it...same icon

I tried to update my phone. The update didnt go all the way through, and ended up freezing the screen on my iphone with an itunes icon on it. I tried to reboot phone with no success...the icon stays on there with no other function of the phone available. Anybody know of a fix?

Put your iphone in dfu mode by doing this. Turn your iphone off. When its off, hold home and power button together for exactly 10 seconds, then release the power button and keep holding home button for another 10 seconds. Then open up itunes on your pc and plug your iphone to your pc. Itunes should recognize your iphone in recovery mode and it will tell you to restore it. Click restore, and your iphone will restore. Remember that, if you do this you will lose everything that was on your iphone. You can restore from backup later on. Hope I helped. If you have any questions or problems with this tutarial, you can contact me personaly on my email [email protected]   . Hope I helped. Cheers

Similar Messages

  • HT1212 Old ipod, can not get it to connect with itunes & i no longer have the computer it was once synced to. It will not allow me to do anything but turn it off & on.

    Old ipod, can not get it to connect with itunes & i no longer have the computer it was once synced to. It will not allow me to do anything but turn it off & on.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?

    I have recently switched from a PC to a MacBook Pro.
    I have a large number of documents and photographs on a multiterrabite external drive, backed up on a second multiterrabite external drive.
    Both external drives are formatted for MacIntosh. This has been verified by agents at an Apple store and also at Best Buy in two different cities.
    This is the problem:
    The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?
    Also, the MacBook Pro will not allow me to rename multiple documents or photographs. I can click-and-rename a single one, but this is impossibly time consuming. I can batch-rename in iPhoto, but when I transfer the photographs to the external drive, the rename does not transfer.
    I’m reduced to using my wife’s Toshiba to cut-and-past, rename, and transfer documents. It works perfectly. Is there any way to do this on the MacBook Pro?
    Thanks!
    Roderick Guerry
    [email protected]

    Roderick Guerry wrote:
    The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?
    No, this is a philosophical difference between Apple and Microsoft. Apple believes that it's dangerous to cut a file in case the user never pastes it; in that case the file is lost. Microsoft seems to not have this problem (if I remember Windows correctly) because they don't delete the originating file if it's cut but never pasted.
    Even though Macs have a lot of keyboard shortcuts, philosophically Macs have traditionally been mouse-first. This applies to file copy operations. In your case, what a Mac user would do is open the source window, open the destination window (on your second drive), and then Command-drag the selected files from the source to destination window. This is because a normal drag would leave the originals behind, while adding the Command modifier key tells OS X that this is a Move, not a Copy, so don't leave the originals behind.
    (In addition there are different rules for drag-copying within the same volume or between different volumes. If you drag between two folders on the same volume, the files are moved. If you drag between different volumes, the files are copied unless you hold down Command to delete the copies on the source volume.)
    Roderick Guerry wrote:
    Also, the MacBook Pro will not allow me to rename multiple documents or photographs. I can click-and-rename a single one, but this is impossibly time consuming. I can batch-rename in iPhoto, but when I transfer the photographs to the external drive, the rename does not transfer.
    Two problems in this case. First, batch file renaming is not built into OS X unless you build something with Automator. However, there are many utilities that can do batch file renaming which you can find at macupdate.com or on the App Store. Since I work with media I often batch rename using one of the media managers I have lying around like Media Pro or Adobe Bridge (comes with Photoshop).
    iPhoto is a database front end designed to shield the file system from the consumer and let them concentrate on creativity and sharing. As such it is often a poor choice for managing files directly. When you "transferred the photographs" chances are you moved the originals, not the ones iPhoto edited which are stored in a hidden folder.
    Roderick Guerry wrote:
    I’m reduced to using my wife’s Toshiba to cut-and-past, rename, and transfer documents. It works perfectly. Is there any way to do this on the MacBook Pro?
    There will not be a way to do it exactly like Windows. As described above, there are ways to do it "the Mac way." If it is possible to remove judgment on which way is "better" you might find the Mac way to be acceptable, but of course sometimes we simply prefer what we're used to.

  • I am trying to sync a playlist to my Nano,  but when I click on the Music tab at the top, it will not allow me to select the option Selected Playlist, Artists, etc.  I cannot un-check the Entire Music library option and check the Selected Artist - on

    I am trying to sync a playlist to my Nano,  but when I click on the Music tab at the top,
    it will not allow me to select the option Selected Playlist, Artists, etc.  I cannot un-check the Entire Music library
    option and check the Selected Artist … one.
    I have changed the Sync option to Manually sync, but that does not help.
    How can I change this to the second option?
    Thanks.

    There is a checkbox above those two options for how to sync.  It says Sync Music; it enables automatic syncing.  That box needs to be checked before you can select from the two options for how automatic syncing is performed.
    NOTE:  If the iPod is current set up to Manually manage music [and videos], checking that Sync Music box replaces its current content with content from your iTunes library, based on how automatic syncing is set up on that screen.
    So, if your goal is to add ONE playlist to an iPod that is managed manually, you do not want to do this because iTunes will erase the iPod's current content and replace it with just that ONE selected playlist (and whatever else you select on that Music settings screen).
    Instead, if the iPod currently uses the manual setting, you need to add playlists manually to the iPod (not use the automatic syncing setting).  Please post back with more details about your situation. 

  • After Yosemite Track pad moves the cursor but will NOT allow Click

    Track pad moves the cursor but will NOT allow click after a period of usage. After Forced reboot track pad works fine for a few hours. This started within hours of installing Yosemite. Help, I am afraid I will lose a document during reboot. So far I have been lucky and have not lost data.
    MacBook Pro (17-inch, Early 2011)  SSD

    Could be many things, we should start with this...
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    Any change on reboot?

  • I tried to remove the rotation lock, it is not off but the screen still will not rotate. Any suggestions?

    i tried to remove the rotation lock, it is not off but the screen still will not rotate. Any suggestions?

    it is not off but the screen still will not rotate
    Well, if it's not off, that means it's on.  So naturally it will still not roate.

  • HT5945 Java has updated again today, i use a jave plug in to run my virtual software to access my work from home, today i have an error message saying security will not allow access to my website that i use to log in to work from, this is a JREdetection e

    Java has updated again today,
    i use a java plug in to run my virtual software to access my work from home,
    today i have an error message saying that security will not allow access to my website
    i use to log in to work from, this is a JREdetection error,
    my system runs off java and citrix, i tried chrome,firefox and safari - same issue, if my system cannot detect java it wont run, it runs on plug ins.
    How to i change my sec settings to allow access to this website, as i can only see that i can add apps not web addresses?

    If you get an error that says can't backup, try moving the existing backup file to a safe location and thry again. again. You can find the location of the backup file here:
    iPhone and iPod touch: About backups

  • TS1398 My wireless router failed and I had to purchase a new one. My security on the new one will not allow me to use the same password. I entered a new password, but of course it is not on my ipod or ipad mini . How can I enter new password ?

    My wireless router in my home has failed. I purchased a new router, but it will not allow some of the characters which I used for my old password. Therefore I cannot access the internet with my ipad mini or my ipod touch. I am unable to change the password on either device. How do I go about changing the password on these units so that I can access the internet? Thanks
    Terry Beckingham

    http://www.apple.com/support/appleid/contact/

  • I purchased a tv series on itunes it allowed us to download 1-5 shows but will not allow us to download anything else how do i get the rest to download or get a refund

    i purchased a tv series on itunes it allowed us to download 1-5 show but will not allow us to download anymore what can i do to get them to download or get a refund

    Why can't you download more?
    Did you run out of space?
    Hi def episode of a tv show, 1 hour long, are about 2 Gb an episode.

  • The App store will not allow "sign in"

    After installing "Mountain Lion", creating an Apple ID, and launching the App Store... it will not allow "sign in". It is like nothing happens at all. Sometimes it says "can not connect", sometimes it does nothing (no matter how many times I hit "sign in"). This is happening on the first 10 Macs that I have upgraded in my studio, I have 60 more???

    Let's make sure we are on the same page. 10 Macs were all working prior with the MAS, and now after upgrading to 10.8.2, all ten have instantly failed?

  • My WiFi is down and says ´´No Hardware Installed´´ and I´m not sure how to fix it. I´ve tried shutting it down and pressing P, R, Command, Option, but it only works sometimes, and as a temporary fix. What do I do?

    My WiFi is down and the icon states ´´No Hardware Installed´´. Sometimes the WiFi will come back, but it will shut me out after an hour or two. I´ve tried shutting it down and pressing P, R, Option, Command while turning it on, but it only sometimes works and is a temporary fix. I´m studying abroad and there aren´t apple stores near me. I went in to one before I left, and thought the tech employee had fixed it, but I started to have the same problem here. How can I fix this?

    This worked and solved the problem.
    Reset PRAM.  http://support.apple.com/kb/PH4405
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    Best.

  • Can't update my Ipod classic's software. My Window's Vista Home Edition will not load the latest version of Itunes, and the older versions will not allow my Ipod to connect to the update server

    I have an Ipod Classic, 80 gig. It's over 3 years old. I have a Samsung SensR410 laptop, also over 3 years old, running Vista Home Premium 32bit but '64bit Compatible'
    I had iTunes 8.
    One day my Ipod stopped working.
    I formatted it.
    I uninstalled iTiunes.
    I re-installed iTunes.
    But the latest version would not be loaded on my PC. I chose English as the language, but because I bought my laptop in Korea, some parts of the installation were in Korea. I uninstalled it, following the steps here: http://support.apple.com/kb/ht1923
    I re-installed iTunes 8. It loaded, but when I plugged in my Ipod, it said that the Ipod needed to be updated/restored, 'click to contact updater' but then it could not contact the server. I tried: http://support.apple.com/kb/TS1814but it didn't help.
    I tried downloading iTunes 9, it loaded, but the Ipod would not connect.
    Help, please!

    Hi Edward,
    You should still be able to manually manage the music on your iPhone within iTunes. Make sure that when your iPhone is plugged in, look in the Summary tab to see if “Manually manage music and videos” is enabled and you can even you turn off Automatically Sync when this iPhone is connected. Take a look at the first article below to give more information on that. As far as your other questions about calling someone, I have provided two options for you. If it is for feedback on iTunes, you can use the second link to give detailed feedback on what is going on. If you want to actually talk to someone, the last link has a list of numbers for you to call for any support or service that you may need.  
    Manage content manually on your iPhone, iPad, and iPod
    http://support.apple.com/en-us/HT201593
    Product Feedback
    http://www.apple.com/feedback/
    Contact Apple for support and service
    http://support.apple.com/en-us/HT201232
    Take it easy,
    -Norm G. 

  • I was doing an update on my ipad2 and I received an error and now my ipad is not working at all.  On the screen it just has the apple logo and a loading bar, but nothing is happening.  What can I do?

    I was trying to do an update on my Ipad2 and it looked like it was getting ready to load, but then I received an error message.  Now my ipad is not working at all.  The only thing that appears on the screen is the apple logo and a loading bar.  I tried to turn it off, but it just wont do anything. Help!

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • Since upgrading to Firefox 5, it will not allow me to print anything, Why?

    I upgraded to the newest version (#5) when it came out, and ever since then I have not been able to print ANYTHING from anywhere when Firefox is open. I would consider Firefox my browser of choice except for this problem

    See this: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages

  • Did anyone stop to think 10.10 is the same as 10.1 so the updaters that check the OS version will not allow updates ?

    Just tred to install anti-virus on the new 10.10 OS and low and behold it see it as 10.1, no surprise there, and will not let me install. Seem most of my installers will not do to the need to be 10.6 or later. This would be funny if it was not costing me all of this time.

    10.10 is not the same as 10.1 and a properly coded installer should recognize that.
    Check if the versions of the software are up to date. Old versions might cause problems anyway.

Maybe you are looking for

  • Has anyone else noticed this bug in the 10.x firmw...

    A vibrate issue I have noticed in the 10.x firmware. Steps to replicate... 1. Put phone into silent mode or any other mode where the phone is set to vibrate when a call comes in (You can actually do this at any point before step 4). 2. Put your N95 i

  • How to publish Aperture projects to iWeb

    iPhoto has a button that enable one to publish photos directly from iPhoto into iWeb.  I can not find such a button since I moved up to Aperture.  Am I missing it?  Or, I may be going about it the wrong way.   I currently use MobileMe to host a famil

  • Iweb showing unknown error when trying to publish

    I haven't updated my website in the last couple of months...I've been waiting for all of the kinks to be smoothed out with the new moibleme. Now when I go to publish iweb 'prepares to publish' and then gives me a message "Publish error- an unknown er

  • Substitute at line item level for F-32 (or FB1D) to change profit center

    Hi I'm Liz, I started to write a substitution for F-32 transaction code for clearing with write off reason codes.  I trying to substitute if Profit center = 14xxx then substitute profit center 141xx for only P&L GL accounts.  If I simulate the substi

  • HT3669 What printer works with the Mac G5 10.5.8?

    I am looking fo r a printer that works with the Mac G5 10.5.8. I bought the Epson XP-410. Th Drive will not download, I recive the message tha tit is not supported by the archectecture.