HT201210 my phone froze after trying to update to ios7

my phone froze while trying to update ios 7 and will not turn on only says iTunes store

it says iPhone can not be restored   I dont know what else to do i have tried restoring it two times already...

Similar Messages

  • Is anyone else experiencing trouble turning thier phone on after trying to update to the ios 6.0.1? I cannot access my phone at all...

    I
    s anyone else experiencing trouble turning thier phone on after trying to update to the ios 6.0.1? I cannot access my phone at all...

    Sounds like their was some corruption that occured during the update. Have you tried connecting it to iTunes in recovery mode and restoring it from backup (or to factory settings if from a backup fails)?  Use the instructions in this article to walk you through placing your device in recovery mode.
    iOS: Unable to update or restore
    Otherwise, try DFU mode.
    http://www.iclarified.com/entry/index.php?enid=1034
    B-rock

  • I have 2 ipod touch's that both have frozen screens and will not reset or show up in itunes. They both froze after trying to update to the latest software version. How do I get them to work?

    I have 2 touch's that froze when trying to update to the latest ios version. Neither respond to restarting the devices. They are also not recognized in windows or itunes. How do I get these to work. I followed all of the instructions on  the apple website and they still don't work. I have verified that I have apple support for mobile devices installed in itunes and my version of itunes is 11.0.1. I am running windows 7 64bit with service pack 1 installed and all of my updates are current. Is anybody else having this problem with their apple devices?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My phone crashed after trying to update it and it wont turn back on please help!

    I tried to update my iPhone 4 to the new iOS 7.0.2 but my phone said it needed to restore everything so i tried to do that and now it crashed. The screen is the Itunes screen saying its connected but i held down the home button trying to get it to turn on or something but it wont. I tried to go to Computer and go to iPhone but its not there and I disconnected and plugged it back in trying to get the window where you can upload photos i tried to get that up but it wont come up. Please I have no idea what I am doing and any advice would be helpful

    it says iPhone can not be restored   I dont know what else to do i have tried restoring it two times already...

  • Why i have to restore iphone4 after trying to update by ios7.3

    why needs to restore after updating by ios7.3?

    restore to factory settings mean deleting everything you put on the phone making it as it were when it was shipped from the factory

  • Phone hosed after trying to update to 1.1.2

    it errored out during the install and now the phone is hosed showing a sync cable icon with an arrow pointing to an iTunes icon. I can't get out of that screen.
    Any suggestions?

    Hmmm, now that I think about it I pulled my phone out of the cradle (equivalent to unplugging the usb cable) and then restarting iTunes resolved the problem for me. I didn't have to do a restore. The previous updates went smoothly for me so I wouldn't panic and assume since you had a problem this time that your experience of 1 constitutes what you can typically expect.
    Anyway, how difficult is it really to click the synch button to re-synch your phone...
    Message was edited by: rwhitetree

  • Did anyone else have their phone reset after trying to update?

    I had the same problems as most doing the update last night, then suddenly my phone came up with the plug into iTunes symbol. Even when I updated it stayed with that symbol, like t was stuck.
    Eventually I managed to get it to reset, but it didn't restore from the backup so I lost everything. :(
    How do I get it to restore from backup? Or have I lost all my photos?
    Did anyone get this problem?

    I'm experiencing a similar problem.   My thunderbolt external drive (Lacie) and my external video card (TripleHeadtoGo) are both unrecognized.  The Matrox troubleshooting tools say it's not even connected...
    Resetting PRAM and SMC worked one time, but the next time my mac went to sleep, it lost the connection again, and I've now down several resets & reboots, and I've still got no thunderbolt connectivity.  Very frustrating.
    Avoiding bad updates is part of why I switched from Windows to a Mac.

  • HT1414 Ipod Mini not working after trying to update to IOS7

    Team Apple....HELP!
    I recently tried to in tall the new IOS 7 on my Mini Ipad....but I get the connect to Itunes with USB cable on the screen. 
    I've intalled the latest updates to the OS on my MAC Laptop and the latest version of Itunes.
    Itunes saw a system that needed to be restore and took two hours to down load something (sorry, can't recall).  After the down load, I'm still stuck with the conect to Ituense with USB cable on the screen.
    Ok, I've tried all the below intsrutction from these links, with no success:
    http://support.apple.com/kb/HT1414
    http://support.apple.com/kb/HT1808
    http://support.apple.com/kb/TS1591
    Any help or suggestions would be appreciated.
    G

    First, try a system reset although I can't give you any confidence.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • My iphone 4 broke down after trying to upgrade to ios7, help please;)

    My iphone 4 broke down after trying to update to ios7, the screen turned black, then went on and showed me the conncet to itunes symbol, but it was already connected, now it's stuck and nothing is responding, itunes isn't even recognizing the iphone, help, thx in advance

    Kevin ..
    Try this support article >   iOS: Device not recognized in iTunes for Mac OS X

  • HT201210 my phone will not turn on after trying to update now all it does is tells me to plug into itunes i have done this and still does not turn on

    my phone wil not turn on after trying to update now all it de si tell me to plug into itunes which i have ready done and still nothing happens can you help

    Try DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time.

  • HT201210 My itouch screen froze showing "plug to itunes" after trying to update to iOS6. Is there any ways to export all the pictures from it before restoring?

    My itouch screen froze showing "plug to itunes" after trying to update to iOS6. It still can be turned on and off. But the screen froze showing that message. I perhaps need to restore it. But is there any ways to export all the pictures from it before restoring?

    Only if y can get the iPod out of recovery mode with the program. Otherwise you will have to restore via iTunes which erases the iPod.
    RecBoot: Easy Way to Put iPhone into Recovery Mode

  • After trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!

    after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!

    you'll want to restore it using itunes and recovery mode
    http://support.apple.com/kb/ht1808

  • HT4236 my iphone 4 is in recovery mode after trying to update and sync to itunes, i was going to try to put the photos over from my phone but now it says i have to restore which will rease all data.. help?? precious phots of my baby!!!

    My iphone phone is in recovery mode after trying to update and sync in order to remove photos from it on to my macbook.  How can i restore without losing the photos?? please help i dont want to lose them!!

    Try holding the home and lock button at the same time and see if it'll restart. If you see the apple logo, let go and wait till it goes to the lock screen and your good(:

  • Error 1603 after trying to update to ios 5 now phone is bricked stuck in recovery mode

    Error 1603 after trying to update to ios 5 now phone is bricked stuck in recovery mode

    Try this - download a program called rec boot. follow the instructions to kick it out of recovery mode. and does itunes recognise
    or hold the power and home button together until you see a "connect to itunes" pic on the screen
    hope it helps

  • TS4431 Hi after trying to update my iPhone 5s while connected to iTunes on the Mac I got a notice saying it could not update the phone (error message: (-1)). Any idea what this error message means? Is it a space issue?

    Hi after trying to update my iPhone 5s while connected to iTunes on the Mac I got a notice saying it could not update the phone (error message: (-1)). Any idea what this error message means? Is it a space issue?

    Resolve iOS update and restore errors

Maybe you are looking for

  • Preserve previous homepage after hard drive crash

    My hard drive crashed and due to various major issues with the hard drive, much of my data was not backed up as it said it was...so... is there a way to preserve my previous iweb site so that when you type in the general web.mac.com/username it will

  • Sales analysis by all criteria: customer, customer type, sales type.

    Hi friends, Can any one explain about , how to do sales analysis, what is the use of this analysis and what is the process to configure in sap.

  • Help Required for Project

    I am doing IVRS for College as my Final Year Project. Here the caller can just retrieve some information(like student marks, attendance, ....). Came to know that java.sound should be used but unable to know how!. Can anyone plz gimme a rough idea of

  • Problem with german special characters in APEX

    Hi, we have a problem with all the special characters in german language in our Application. APEX version 3.1.0.00.32 is installed on a oracle database 9.2.0.6.0 The nls_characterset of the database is: American_America.WE8ISO8859P1 We have modified

  • How to start pop3 with out store

    Hi All, we messaging server 7.3 we want to configure MTA and pop3 one server and messaging store another server. Regards kkdas