HT201210 Stuck in Activation Limbo, How do I get out of it?

I have an iPhone 4s. I've had iOS7 ever since the beta came out. I received it with my iOS Developer Certificate.
Last night my phone just went into the Activation Mode, like when you turn your iPhone on for the first time. It is stuck in Activation Limbo. It will not move past the screen after you select a Wi-Fi connection. This message appears...
"Your iPhone could not be activated because the activation server is temporarily unavailable. Try connecting your iPhone to iTunes to activate it, or try again in a couple of minutes.
If this problem persists, contact Apple Support at apple.com/support."
Well I've connected my iPhone to iTunes and it says my software is out of date and needs to be updated. When I check for updates, it says my sortware is up-to-date and won't do anything. It won't even let me back up my phone.
Has anyone else had this problem? Is there a way I can get my Phone back so I can use it? Do I just have to wait until it just randomly with Activate?

Hi
I am having this exact same problem. Apparently you need to put the phone in DFU mode, then restore the phone (i would advise backing up your phone before hand) However my phone will not allow me to do this so i am stuck as well.

Similar Messages

  • Osx stuck in single mode, how do I get out please

    I have a Mac Pro OSX mountain lion, stuck in single mode,not sure of administrative account so just want to get out of single mode .it displays right now...display all 1475 possibilities?(Y or no) I hit No and it repeated I don't want to Press yes unless I know what's going to happen. can someone please Help Me.I just want to get out of here so I can take it to the Apple store tomorrow

    If you cannot login you will have to go back to single user mode in order to reset a password.
    Follow the instructions here:
    http://www.macyourself.com/2011/08/20/how-to-reset-password-for-mac-os-x-10-7-li on/
    excerpt:
    Shut down your Mac and turn it back on while holding down the Command and S keys at the same time until your see a black screen with white text. This is known as Single User mode.
    You can skip this step, but it’s recommended that you don’t because it will check the consistency of your hard drive. At the prompt, type fsck -fy and press Enter.
    Once the disk check is complete and the prompt returns, type mount -uw / and press Enter.
    Type launchctl load /System/Library/LaunchDaemons/com.apple.opendirectoryd.plistand press Enter.
    Type ls /Users and press Enter. All of the usernames on the computer will be listed, which is helpful if you don’t know or remember what these are.
    Type dscl . passwd /Users/username password while replacing username with one of the users displayed in the previous step and replacing password with the new password of your choice. Press Enter. You will likely get an error message about a file or directory not being found – it’s safe to ignore this.
    Type reboot and press Enter.

  • I've got the memory card stuck in cd slot how do I get out

    Ive got the sd card stuck in the cd ..how can i remove?

    It's easier than you'd think https://youtube.com/watch?v=9fCUZo00I5E

  • Leopard install is stuck halfway through. How do I get out?

    I have a Power Mac G4, currently running OSX 10.3.9. Today I bought the installer disc for Leopard, and began an install.
    The install is stuck on the "Installing" screen (which comes after it checks your disc is OK). I have the dreaded spinning beachball of death, and the thin blue line in the progress bar is going nowhere. Under the progress bar it says "Time remaining: Calculating...
    My G4 specs:
    Power PC G4 (3.3)
    OSX 10.3.9
    Processor: 1.25GHz
    Memory: 1.25GB DDR SDRAM
    I set the disc going in the lower DVD chamber (not the DVD player that came with the Mac, but another one I had installed that also has a DVD burner). Is it possible that my Mac doesn't like me using this DVD drive?
    Help! How do I stop it and try again? I don't want to just shut down my machine in case I kill in mid-install. Is there a way of force-quitting the install or something?

    A halfway installed operating system is not totally lost necessarily. It could just be a bad directory, or insufficient space, or a corrupt file somewhere that has yielded an issue installing. Regardless, you can attempt to recover data to an empty Firewire external hard drive at least the same size as your internal drive using Prosoft Data Rescue, Subrosasoft Filesalvage, or Boomerang's Boomerang if you can't mount the hard drive via Target Disk Mode using another Mac or booting that external hard drive from a second partition. To mount it via Target Disk Mode do this set of instructions:
    http://www.info.apple.com/kbnum/n58583
    Your recovered files won't be bootable, and registration codes won't be saved, but at least your data has a good chance of being saved if you do one of the above.
    If you decide to get a second Firewire hard drive, my recommendation is to get one at least 20 GB larger than your internal hard drive, partition it, and install Leopard, Superduper, and one or all of the data recovery programs (Data Rescue, Filesalvage, Boomerang) on the 20 GB partition, and leaving the empty partition to recover data to. If you can boot that external hard drive's partition and do that recovery in one way or another, then you can safely analyze why the internal hard drive failed installation.
    To boot the external hard drive after installing the operating system on it, use the Startup Manager below:
    http://www.info.apple.com/kbnum/n106178
    If none of the three recovery utilities can see the internal hard drive, then a data recovery specialist such as http://www.drivesavers.com/ is necessary. They are expensive.
    This is why you should always backup before installing new software, and after saving any important data. See my backup FAQ*:
    http://www.macmaps.com/backup.html
    - * Links to my pages may give me compensation.

  • I'm stuck in proxy mode, how can I get out?

    I seem to be be stuck in proxy mode. Even with a new library and a new clip, it shows a 'missing proxy' label. I can't switch to 'optimized/original media'. FCPX simply doesn't do it. I already tried trashing prefs and reinstalling FCPX. please help?
    Arnoud Kwant
    The Netherlands

    What exactly happens when you try to switch by selecting Original/Optimized as in Alchroma's image? Does it still show Proxy as selected?
    You may also try Window->Revert to Original Layout.
    If reinstalling, it is recommended that you use FCS Remover to make sure that all traces of the application are deleted. And then you'd need to download a fresh copy from the App Store, and also download the additional content from inside the application.
    It stays on Proxy. That is the issue.
    Revert to original layout didn't help.
    I uninstalled using AppCleaner. I deleted all files (except the 1Gb of additional content)
    (BTW thanks for Luis and Alchroma for trying to help)

  • Hi I've done An update on my iphone5 today and some how it's got stuck in recovery mode how do I get out of it

    Hi I've just done the new up date to my iPhone, and it's now gone into recovery mode and is telling be to restore phone how do I do this

    Beattygirl wrote:
    , do you know how to restore it?
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • I-Pod stuck in test mode, how do I get out?

    I-Pod screen shows "Accessorize Test" below that reads "please plug FW" followed by "LCD ID: 1" and followed by "FWPWR : 0"
    If I plug it into my computer, it isn't recongized. Doesn't show up in I-Tunes or on My Computer. I've tried pressing all the wheel keys... nothing works.

    Have you tried "Resetting" your iPod. Toggle the hold switch off and on a few times then hold down the MENU and SELECT (centre) buttons for five or ten seconds until you see the Apple logo appear then the menu button to go to the normal display: iPod isn't responding it appears to be frozen

  • HT201210 my iphone is stuck on the itunes screen and when i try to restore it it just go back to the itunes screen how do i get out of it

    my iphone is stuck on the itunes screen and when i try to restore it it just go back to the itunes screen how do i get out of it

    Connecting in recovery mode will help: http://support.apple.com/kb/HT1808

  • HT3224 I am new to Mac and started transferring data from my PC to my new Macbook Pro.  Connection was lost once I started and now my Pro is stuck on the 'Transferring Information' screen.  How do I get out of this screen to attempt the connection again?

    II am new to Mac and was trying to transfer data from my PC to my new Macbook Pro.  The connection was lost however and now my Pro is stuck on the 'Transferring you nformation' screen.  How do I get out of this screen so I can attempt the connection again?  Is it safe to force shut down of my Mac and will it still prompt me through all the setup process again?

    Welcome to Apple Support Communities
    If your Mac and PC are connected by Ethernet, unplug and plug that cable again. If not, you have to turn off the MacBook by holding the Power button.
    In the next startup, try to transfer your files again. It's important not to interrupt the transfer process, because in most cases, you will stop it and you won't be able to resume it

  • I had the developer preview for IOS 6 on my phone, and just got a message telling me that my operating system is no longer active. How do I get my phone activated again?

    I had the developer preview for IOS 6 on my phone, and just got a message telling me that my operating system is no longer active. How do I get my phone activated again?
    I had the developer preview installed. Never had to update to the release version of the OS. Now, the preview has expired, and I cannot use my phone because my iTunes reads my OS as being current, but my iPhone cannot active. Any ideas on how to fix this issue?

    If I Google for Michael Superczynski, first match tells "Michael Superczynski's Profile : Apple Support Communities". It in fact does a lot of work there even if not paid.
    And yes we do not have disagreement about "official apple developers". Problem is that Apple screwed our devices because we are "official apple developers" and did effort to stop us getting proper help. I unbricked my ipad and iphone thanks to unofficial help. Thank you who wrote this unofficial help and "no thanks" for apple for ruining my access to my devices. My mistake was assuming that "update" button on my devices works. It did not because it always told "Your device has latest IOS6 installed" until it bricked yesterday.
    If Apple does not want to listen us, continue do delete post, blame us installing your software and yes we stop buying your devices and developing for them.
      Tonu

  • I recently bought Photoshop Elements 12 and the system is saying that the Redemption Code is no longer active.  How do I get a new code that will allow access to the software ?

    I recently bought Photoshop Elements 12 and the system is telling me that the Redemption Code is no longer active.
    How do I get a new Code number that will allow met to access the software?

    you need your serial number.  you used your redemption number to redeem your serial number.
    if you don't know your serial number, check the account used to purchase or register your pse 12, Adobe ID

  • My App Store Icon is stuck in Newsstand. How do I get it out and back on to home screen?

    My App Store Icon is stuck in Newsstand. How do I get it out and back on to home screen? Have tried via itunes to move it and also swipping it - just won't come out.

    I have the same problem!  Let me know if you manage to sort it out.  My iPad did the same thing but to full restore from iTunes sorted that out. Have you tried that? No such luck with my iPhone.

  • I lost my iphone 4 just after half an hour I bought it and I hadn't even activated it,how can I get my iphone 4 back?

    I lost my iphone 4 after half an hour,which i had bought it without contract in full payment, and hadn't even activated it,how can I get my iphone 4 back?I haven't put any sim card in it too..please help me..

    Unfortunately there is no way for you to get it back.  Just report it as lost/stolen to the police just in the rare case they catch someone with it.  If you had "find my iphone" setup through mobile me, there would of been a chance.  Sorry.

  • I am stuck in guided access and I don't remember my password.  How do I get out of it without losing all of my picture and apps and such?

    I am stuck in guided access and I don't remember my password.  How do I get out of it without losing all of my picture and apps and such?

    Connect the iPod to its syncing computer and restore via iTunes.  If the iPod asks for the passcode and you can't enter the passcode or if you do not have the syncing computer, place the iPod in recovery mode and then restore.  For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • I updated imovie, which is now totally different.  I tried to import videos from iphotos, but the system is now stuck on "import" and it doesn't include iphotos.  Clicking on "close" doesn't work.  How do I get out of "import"?

    I updated imovie, which is now totally different.  I tried to import videos from iphotos, but the system is now stuck on "import" and it doesn't include iphotos.  Clicking on "close" doesn't work.  How do I get out of "import" and then how do I access iphoto?

    I have asked a moderator to provide assistance, they will post an invite on this thread.
    Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
    Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Maybe you are looking for

  • Adobe Photoshop Elements 11

    I recently purchased and downloaded Adobe Photoshop Elements 11 and I notice that 2 folders were created in My Documents, as follows: Folder No. 1 - Adobe Photoshop Elements 11 - 1.87GB, 163 files, 52 Folders Folder No. 2 - Photoshop Elements 11 - 1.

  • Trigger that sums free days

    Hi to all, I try to write a trigger that fires after an insert or update that drives me crazy! My problem is the following: I have a table HOLIDAYS where I have all my free days in a year, always the name and than the number of days, e.g. ('smith', 5

  • Can you search annotations in Preview?

    When annotating a pdf document using preview, is there a way to search your annotations??  Thanks!!

  • JDev 10.1.2 connecting to AS 10.1.3_dp4... fail

    Hi, these are the steps to create a connection to the AS 10.1.3_dp4: Click Connections - Application Server - New Connection... Connection Type = Oracle Application Server 10g Authentication, Username = oc4jAdmin, password = myPwd Connection: Enterpr

  • OS X does not "see" items on CD's.  Claim's CD is blank.

    Lately I have been having trouble with my mac "seeing" items such as photos and files saved on older cds. If I put the cd in to a windows machine, they show up, but my mac only shows a "recordable cd." Any ideas?