HT201210 Unable to activate, backup, update or restore iOS device or iPods using iTunes

Help! I just got an Ipod Touch Generation 3 and am unable to activate, backup, update or restore iOS device or iPods using iTunes.

Read this.

Similar Messages

  • HT201413 Unable to activate, backup, update or restore iOS device or iPods using iTunes

    unable to activat, backup, update o restoe iOS or ipods using iTunes..

    http://support.apple.com/kb/TS3694#error40
    Most likely it would be a hardware problem.
    Is iTunes currently up to date on the computer? Try switching USB ports on the Mac if you still have more available.

  • Unable to activate after updating to iOS 6

    The iphone 3GS is unable to activate after updating to iOS 6 i'm connecting it to iTunes but it says there is no SIM card which there is plz help

    connect phone to iTunes, click OK on any of the error boxes that come up.  Then with your iphone still connected to iTunes, hold down the home button and press the lock button and count to ten, then let your finger off the lock button whilst keeping your other finger on the home button for a further 10 seconds.  Your phone will then go into restore mode, a message should then pop up on iTunes asking if you want to restore and update - click yes.  I followed the procedures and my phone is now running perfect with ios 6.0.

  • The iphone 3GS is unable to activate after updating to iOS 6 i'm connecting it to iTunes but it says there is no SIM card which there is plz help iPhone 3GS, iOS 6

    The iphone 3GS is unable to activate after updating to iOS 6 i'm connecting it to iTunes but it says there is no SIM card which there is plz help
    iPhone 3GS, iOS 6

    Your iPhone was "unofficially" unlocked by some means to work with a different carrier. Now that you have updated it has relocked to the original carrier. If you do not know who the original carrier was you will need to call AppleCare and give them the model and serial number of your iPhone. Then you will need to contact that carrier to see if they have a process to unlock the phone and if you qualify.

  • HT201210 What To Do When You Restore Your 1st Gen. iPod And iTunes Says It Can Not Be Done Due Too An Unknown Error (1)

    What To Do When You Restore Your 1st Gen. iPod And iTunes Says It Can Not Be Done Due Too An Unknown Error (1)

    ERROR (1)
    - Place the iPod in DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try on another computer
    - Try another cable           
    - Also, confirm your security software and settings are allowing communication between your device and update servers.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar     

  • HT1414 I restored my I phone 4 using Itunes, after that I can't access the icon any more I only got a message that says " ( Sim not Valid.) Only compatible SIM cards from supported carrier may be used to activate iphone.

    I restored my I phone 4 using Itunes, after that I can't access the icon any more I only got a message that says " ( Sim not Valid.) Only compatible SIM cards from supported carrier may be used to activate iphone. I need some proffesional help. Thanks

    "We're Sorry, Activation Server Temporarily Unavailable, contact Customer Care, Sim not vaild?"
    99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
    So, either get a sim card from the carrier your phone was originally locked to, or get it officially unlocked, if you want to activate it. Because it appears that it was not officially unlocked.

  • HT4623 am update my iphone 3gs ios4.1 to ios 6.0.1 using itunes when update comleted itunes show a message Were sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care! pls help me pls

    am update my iphone 3gs ios4.1 to ios 6.0.1 using itunes when update comleted itunes show a message Were sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care! pls help me pls

    Generally this is a sign that the iPhone had previously been
    hacked/modified/jailbroken and the update relocked it to the
    original wireless carrier. If this is the case, only that wireless
    carrier can unlock your iPhone. You must contact them to see
    if they offer unlocking and if you qualify.
    Where did you acquire this iPhone?
    What wireless carrier did you use before this problem?
    Does the app Cydia appear on your iPhone?
    What does it say when you look at Settings=>General=>
    About=>Carrier?

  • HT201210 I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items!

    I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items! Help!  There is not error message number just the text message. I've searched for an answer but have found nothing on "transfering items purchased to your iTunes library".

    Right click on your device icon on the left pane of iTunes and click on transfer pur....

  • HT4623 have not been able to update my 4s iphone to ios 8.0.2 using itune, hlaf way in download it fails. I have been trying last 24 hrs

    I have not been able to update my iphone 4s  to ios 8.0.2 using Itunes
    I have updated my Itunes on windows to latest version
    The download of 8.0.2 fails after 20 minutes due to unknown reasons.

    Hi, nasser_1342
    Thank you for visiting Apple Support Communities. 
    I would need a little more information regarding the exact errors you are receiving to better assist you.  However, here are the best troubleshooting resources to start with when not being able to update or restore your iOS device.
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/ts1275
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/TS3694
    Cheers,
    Jason H.

  • HT1267 Im trying to restore my iphone 3G, i used itunes to restore it so it downloaded the iOS, after that it gives me the error 1015, when i read about the error then it tells me that i was downgrading, but how come since i used itunes to restore?

    Im trying to restore my iphone 3G, i used itunes to restore it so it downloaded the iOS, after that it gives me the error 1015, when i read about the error then it tells me that i was downgrading, but how come since i used itunes to restore? why didnt it automatically provide me with the latest software made perfectly for the iPhone?

    Your phone was jailbroken. You can't get help here.
    In VERY RARE circumstances, this may indicate a hardware failure.

  • HT4623 When i try to update my ipod using iTunes, it say it can't be done b/c it cant contact my ipod software server!!!

    When i try to update my ipod using iTunes, it say it can't be done b/c it cant contact my ipod software server!!!

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

  • My ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

    my ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT201210 My iPhone will not update or restore from iTunes. It's frozen

    My iPhone will not update or restore from iTunes. It's frozen

    You may be in a recovery mode follow this article http://support.apple.com/kb/HT1808
    If you have a backup you can restore your contents by following this article
    http://support.apple.com/kb/HT1414
    Good Luck!

  • HT201210 I am trying to update and restore my iPod touch back to factory settings but i can't remember the password for the screen, How do I reset the password?

    I am trying to update and restore my iPod touch back to factory settings but i can't remember the password for the screen, How do I reset the password?

    Connect the iPod to the computer and restore via iTunes. If necessary, place the iPod in Recovery Mode to allow the restore.

  • TS3694 Troubles updating and restoring iOS

    Is missing to me file 1015 and its making an error and i can't restore the iOS to my iphone

    Howdy mehde,
    There is an article that explains what to do in this situation that I found while researching the issue. It is called iOS: Unable to update or restore found here: http://support.apple.com/kb/HT1808.
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
    Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Note: If you see the screen pictured below, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
    Continue holding the Home button until you see the "Connect to iTunes" screen.
    If necessary, open iTunes. You should see the following "recovery mode" alert:
    Use iTunes to restore the device.
    Cheers,
    Sterling

Maybe you are looking for

  • Performance problem with 0REFX_6 extractor

    Hello, I would like to use 0REFX_6 extractor. If I select one fiscal period, it takes 7mn, for 2 fiscal periods 15mn, etc etc Do you know you to speed the extraction ? Best regards Nicolas

  • How to define a Recur. Paymeny/Ded wage type for an Emp Subgroup

    I have created a Recur. Payment/Deduction (0014) wage type of "Fixed Amount" value 9say, Rs.2000). I want all the employees of an Employee Group to get this amount in salary, periodically (say in periods 2, 4 & 6). I know, thru "Personnel Actions-Mai

  • Odd 'shifting' problem

    Hello! Thanks ahead for any answers.  I've been coming across this weird issue while creating a website menu: Sometimes, when I preview/export my SWF, some of my objects (text, graphics) will shift a few pixels on mouse over/mouse out - but when I lo

  • Cheat sheet for deploying OAF customizations

    We have some extended pages and a new page developed with JDeveloper, which is using our development database. I'm new at this, and I think I want to... To deploy it to the development application server, from the developer's machine, we: Don't do an

  • CS2 vs CS3 printing to Epson 3800

    In trying to diagnose a Photoshop/11880 printing problem, I made some test prints to an Epson 3800 from the same test file. Andrew Rodney's "printer test" image includes very smooth color gradations R > M > B > C > G > Y > R. This image was printed f