HT201250 Backup using lacie external drive with time machine

Hi, I recently backed up my macbook with a lacie external hard drive using time machine.  However, when i try to open my photos, which says there is 11.67GB there, nothing happens.  It only opens an empty file.  After my backup i deleted the photos from my laptop, after all i was trying to clear disc space on my macbook.  Can i resolve this or can i open the file in a different way?  Help

One should always confirm copied stuff is where they think it is before deleting the original stuff. See Pondini's TM FAQs, for starters.

Similar Messages

  • Can't use two external drives with time machine

    I have 2 external drives.  I tell time machine that I have 2 and it asks if I want to use both.  I say yes and it says it will alternate between them.  However, after backing up to both, it then will invariably say that one doesn't have enough room for backup...as if it is trying a new backup......  rather than just adding changed files.  Why is it doing this and how do I remedy?

    It then will invariably say that one doesn't have enough room for backup
    Unfortunately, these kinds of things are common with Mavericks. All that you can do is erase the drive and start over again with a new backup. Or, if you do not want to erase the drive, set it aside in a safe place and add a new drive....and Mavericks will make a full backup to that one to start things off.

  • Using the same external drive with Time Machine on new mac?

    I recently got a new mac because my old one broke. Thankfully, I had a fresh backup on Time Machine ready to restore onto my new computer. But when I try to use Time Machine with my new computer, it keeps wanting to do a whole new backup. It won't recognize the latest backup to only add new or changed files.
    Here's a breakdown of my events:
    new computer
    restore Time Machine on new computer at install
    want to continue using the external drive with Time Machine from where I left off (only adding new files since the last backup) on my new computer
    Time Machine wants to do a whole new backup
    Question: How can I continue to use my existing external hard drive with Time Machine on my new computer, picking up where I left off (not a new, complete backup)?
    My old computer was Snow Lepoard, my new one is Lion.

    Bergers wrote:
    new computer
    restore Time Machine on new computer at install
    That should have left a "trail" in your SystemMigration log, so Time Machine can figure out what happened and automatically "inherit" the old backups.  But sometimes, obviously, that doesn't work.
    Since it didn't, there's a chance you can do it manually.  See #B6 in Time Machine - Troubleshooting.

  • Can I use a 2tb external drive with Time Machine to backup my Mac Mini (256gbSSD + 2tbHDD)?

    Can I use a 2tb external drive with Time Machine to backup what I have on my Mac Mini?
    My Mac Mini has one 256 SSD and one 2tb HDD. I want to use Time Machine to do a backup of everything.
    Would an external 2tb My Passport Drive by Western Digital work for the backup?
    It seems like it would not work because the total storage on the Mac Mini is 2304 gigabytes (SSD + HDD).
    And the external Western Digital drive is only 2048 in gigabytes versus 2304 gigabytes the Mac Mini has.

    No. A Time Machine backup drive should have at least twice the capacity of the drive it backs up. You would need at least a 4 TB backup drive for Time Machine.
    Might I suggest as an alternative that you not use Time Machine but a third-party backup utility that simply overwrites older files with new ones such that the backup drive can be the same capacity as the drive backed up.
    Suggested Backup Software
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Others may be found at MacUpdate.
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files.

  • If I already have an Airport Express Base Station, can i hook an external hard drive into it's USB port and use that hard drive with Time Machine?

    If I already have an Airport Express Base Station, can i hook an external hard drive into it's USB port and use that hard drive with Time Machine?

    No, and that shouldn't be done with an AirPort Extreme or Time Capsule.
    (66017)

  • Had to wipe my drive so I could do a clean install of snow leopard Now I look every where on how to move bookmarks, address book and I cal settings.  I have them back up on a external drive with Time machine but can not move, copy or restore my old sett d

    Had to wipe my drive so I could do a clean install of snow leopard.   Now I have look every where on how to move bookmarks, address book and I cal settings.  I have them back up on a external drive with Time machine but can not move, copy or restore my old settings.  The instructions I have found or no help or needs more clarafication on what to do.

    Use migration assistant to move your files.  http://support.apple.com/kb/HT4889

  • I backup to an external hdd with Time Machine, when it ran out of space it did not delete old backups, now my internal hdd says its full when before it had heaps of space. I have searched for extra files but cant find any. Can anyone help, please.

    I backup to an external hdd with Time Machine, when it ran out of space it did not delete old backups, now my internal hdd says its full when before it had heaps of space. I have searched for extra files but cant find any. Can anyone help, please.

    First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
    To locate large files, you can use Spotlight as described here. That method may not find large folders that contain a lot of small files.
    You can also use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Proceed further only if the problem hasn't been solved.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    Install ODS in the Applications folder as usual.
    Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
    When you're done with ODS, quit it and also quit Terminal.

  • I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

    I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

    If the external drive can be seen at all in Disk Utility, follow the instructions for repair here.

  • External Drive with Time Machine, booting from external drive with utilitie

    I'm using Time Machine now with
    a LaCie 1TB external hard drive.
    Everything works fine.
    But, I've been wondering:
    Can I place a program like TechTool
    on the external drive (that Time Machine uses)
    and boot from that external drive.
    I would like to be able to do that,
    because diagnostics and repair programs
    only works properly and fully when they run from
    external drives. Anything on the internal drive can be repaired
    and examine. Impossible to do if Techtool is on the same
    drive that's been examined.
    Any thoughts as to what I should do?
    Thanks
    iMac, Leopard, Time Machine, Lacie Quadra 1TB drive.
    P.S. Stupid question: If my computer crashes, and I reboot from Time Machine
    (from the external drive) how does the computer know which backup to take ?!?
    Isn't there many versions of the OS on the Time Machine backup taken at different times?

    pitou wrote:
    P.S. Stupid question: If my computer crashes, and I reboot from Time Machine
    (from the external drive) how does the computer know which backup to take ?!?
    Isn't there many versions of the OS on the Time Machine backup taken at different times?
    As V.K. says, you can't boot from TM backups.
    But you can restore your entire system from any one of them, per the procedure in #14 of the Frequently Asked Questions *User Tip,* also at the top of this forum.
    You can also selectively restore from them, while running normally. See #15 in the FAQ Tip.
    You might want to review these:
    Time Machine Tutorial
    Time Machine 101
    How to back up and restore your files
    Time Machine Features
    Apple - Support - Mac OSX v10.5 Leopard Time Machine
    and perhaps browse the rest of the FAQ Tip.

  • Trouble backing up external drive with time machine

    I have a small USB stick that I use to store important documents but documents that I don't access very often.  I have an additional 500 GB hard drive that I use for backing up with Time Machine.  I want Time Machine to backup both my internal hard drive (Macbook Air 2011 Lion) as well as the small USB stick. I've searched the forum and discovered that I needed to reformat the USB stick, which I did (it is now Mac OS Extended).  The USB now appears in the list of excluded drives in Time Machine preferences, which I removed.  Thinking that Time Machine would be backing up my USB stick now, I backed up and then turned the computer off.  The next day, I looked at the external drive, and it didn't seem to have a backup of the USB.  I entered Time Machine and the USB is "greyed out" which means it wasn't backed up. I've retried backing up several times by including the USB in Time Machien preferences, but it seems that when I click "save" it doesn't actually save because when I open Preferences up again, the USB stick is in the list of excluded items again.  Have I done something wrong?  Any imput would be greatly appreciated.

    I don't use Time Machine but my view is that it is too dangerous for sticks which may be removed - I understand that it may delete previous backups if it discovers that the stick no longer exists.
    You could:
    manually copy the stick to your main drive from time to time
    use Carbon Copy Cloner to backup the stick
    use a utility to mirror the stick to your main drive

  • Using an External Drive with 2 machines

    I presently use my external drive to store the images, and work off LR on Laptop 1, ie the LR folders are all on Laptop1. The external defaults to Drive F on Laptop 1.
    I want to use a desktop (2) with the same external drive. In this case, the external Drive defaults to Drive G when connected to my desktop.
    What files/folders do I need to transfer from Laptop to Desktop, and should I be concerned about the drive letter defaults?
    Thank you.

    The complexity with this idea is the software has to run from a Mac computer on your network.. so you need a Mac turned on, probably most of the day.
    It isn't possible to partition the TC although you can create a image area.
    The software would have to copy the material, that means all files to be copied, go from USB drive, back to the Mac, then back to the TC, and written to the drive. In other words you have just added Network congestion, although a proper incremental backup type software will not actually use a lot of capacity.
    Finally it will be slow.. network drives are slower than internal drives. Well USB connected drive is much slower than the same drive connected directly to the computer.. and if the drive is connected directly to a computer it can be shared with the network.
    http://www.anandtech.com/show/4577/airport-extreme-5th-gen-and-time-capsule-4th- gen-review-faster-wifi-/4
    Read carefully the speed of the USB drive plugged into the TC.

  • Help using connect hard drive with Time Machine

    My iMac and the two wirelessly connect apple laptops all recognize the Western Digital MYBookWorld 500gb external hard drive. We can all write to it and retrieve files. We are using a Lynksys router to which the iMac and WD drive are connected directly while the laptops connect wirelessly.
    We are trying to use it with TIME Machine, but when we try to set up time machine, the drive does not show up as an option for the back up disc.
    I have read through several old discussions about not recognizing the disc at all, but this is not our problem. Anyone with ideas?

    Hello Taxi Driver and welcome to Apple Discussion!
    In short to use the External HD for the current backup and TimeMachine you will need to repartition it creating a partition for each. The down side at this point, is that in order to repartition the external the current data on it will be erased. When setting up the External for TimeMachine set the Partition Map Scheme to GUID Partition Table and the Format to Mac OS Extended (Journaled)
    A couple of options:
    1. Backup the current files on the External HD to one of your Mac's, then repartition it with 2 partitions, then use the 1st for TimeMachine and copy back the files to the 2nd partition.
    2. Safer and easier way is to pickup a second external and set it up for TimeMachine.
    http://www.apple.com/support/leopard/timemachine/

  • Using an External Drive for Time Machine and Other Things

    I have a 2TB external drive which I use for Time Machine Backups on my 2 macs. The macs have HDs of 500GB and 160GB so the external drive has ample space for backups.
    Is it okay to use the external drive for other things that I don't care if they aren't backed up (like digital copies of DVDs)? i.e. Will Time Machine cause any issues if a drive is used for more than just Time Machine backups?

    rgraves wrote:
    I have a 2TB external drive which I use for Time Machine Backups on my 2 macs. The macs have HDs of 500GB and 160GB so the external drive has ample space for backups.
    Maybe. See #1 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
    Is it okay to use the external drive for other things that I don't care if they aren't backed up (like digital copies of DVDs)? i.e. Will Time Machine cause any issues if a drive is used for more than just Time Machine backups?
    It's best to put such things in their own partition. See #3 in the FAQ.
    You may also want to make separate partitions for each Mac's backups, if you're backing-up either one directly (ie, not over your network). See #4 in the FAQ.

  • How can I split a backup on two hard drives with Time Machine ?

    Back-up of my Imac with time machine is 1,3 TB. I have two 1 TB external hard drives but even if I had both as available in Time machine, it seems it doesn't allow to split the backup between the two hard drives. Any way to resolve this without buying another hard drive with more space?
    Thanks in advance

    You cannot directly split a backup. Your only option would be to open the TimeMachine preferences from System Prefs. and add things to the exclusion list for one of the backups. Then, when you go to do the other backup you would reverse the process and add everything else to the exclusion list and remove the things you had on there in the first place.
    Seems fairly intensive though when you could just go and buy a 2 or 3TB external drive and do it all in one...Black Friday is coming up
    Regards,

  • Im using a network drive with time machine and im getting error 45. Time machine will not work now. Why?

    I bought a seagate goflex home 2TB network drive. It worked with time machine for a couple of weeks than now it wont. It just says ERROR 45 now and will not back up. Why?

    Welcome to Apple Support Communities.
    According to several related Time Machine Error 45 threads in these forums, Time Machine is not well suited to backups on most non-Apple network drives.
    https://discussions.apple.com/message/10744727#10744727
    https://discussions.apple.com/message/15643759#15643759
    https://discussions.apple.com/message/11929252#11929252
    https://discussions.apple.com/message/13164522#13164522
    One of the discussions provides an off-site link to these suggestions:
    http://web.me.com/pondini/Time_Machine/Troubleshooting.html

Maybe you are looking for