HT201250 itunes not shown after restoring with time machine

itunes music not showing following a time machine back up .

WoodShavings wrote:
Thank you for the quick response. Booting from the SL DVD, partitioning, and then a full restore has worked.
Great!
It did take a bit for me to figure out how to select the SL DVD - the HD already had a restore on it that was causing the panic. The 'alt' key is a great trick for selecting your boot device.
So is the "C" key. That will boot from the CD (or DVD) in the SuperDrive.

Similar Messages

  • External HD as Startup Disk won't work after Restoring with Time Machine

    Hey all, this seems very simple; very, very simple at that... But I might be overlooking something here:
    I recently had a MacBook running the latest OS X Leopard, until my cat decided I didn't need it anymore and added a glass of water to the mix! So after weeks of freaking out and praying... I found myself with a loaner computer, this iMac G5 1.8 GHz, successfully running leopard for the most part.
    Here's the good news: I had Time Machine backing up all my files from the MacBook that can't swim. It was backed up on a partitioned 1tb Western Digital hard drive, like 700gb for TM and 300gb for an external HD.
    What I am trying to accomplish is to use the TM backups from the 700gb side to "restore" the system onto the other 300gb external HD side, and use this is the main disk on my iMac G5.
    So far, after a 7 and a half restoring session with my Leopard install disc, I think the 300gb external HD is prepped and ready to go, but I can't select that HD as a startup disk, and when I first restarted after the restoring session with my Leopard disc, the startup disk I wanted was "not found" and it quickly went back to the 80gb iMac internal drive. HELP!
    Maybe this isn't possible because I'm backing up and installing onto the same HD?

    So far, this is where I am at... and I think I'm on the right track!
    I don't care what is on this loaner computer (it's one of those... you know, "long-term" loans from my parents...) So I reinstalled Leopard, fresh install. I had an option of restoring from Time Machine, and then I realized I'd be restoring to the wrong disk, so why not install Leopard onto my external partitioned HD that I have been wanting this whole time?
    Looking closer, apparently I need to completely repartition my WD external hard drive with an Apple Partition Map because I'm using it with my Power PC-based iMac G5 (beggars can't be choosers!) If I had an Intel-based Mac, I'd be OK with my partitioned HD that I set up with a GUID Partition Table with my drowned MacBook, right?
    So, like I said, I am on the right track... all I'm waiting for is to borrow an addition external HD to shuffle some files around before I can do this right... hopefully. Another question: am I able to duplicate my Time Machine Backup HD to another external HD? Or will I have to get really creative or "ghetto" in my attempts to bring one restore of my past computer?
    Thanks for all your help and support! And to answer the other question so far, all my HDs are connected via firewire. Thanks!!
    -kevin
    Message was edited by: Kevin Cramblet

  • Super drive is not working after Restoring from Time Machine

    well its pretty much the Subject actually, my imac giving me BlueScreen problem so i searched and posted question and the only Solution i got was to Re-install Leopard and i did that by using Leopard DVD and Restored my imac from Time Machine backup, But i got into new problem and now the TIME after restoring from the "Time Machine" my DVD ejecting EVERY CD,DVD etc. even the Leopard DVD which he reads happily.
    I dont think its a hardware fault at all, but i'm not a "Genious". Any suggestion!

    Issue solved with visit to Genius Bar.
    As I understand it here are the steps the Genius did. Attempt to create the account (system preferences->users) with the same information. It will say it already exists. Very carefully read the options. One will say use the existing account. BE CAREFUL because one option will wipe your data.
    If you need to do this it might be worth the trip to the Genius Bar as you could wipe your data. One precaution I took was to bring a full copy of that user account onto my desktop (from the backup immediately before the wipe) in addition to the one in the user folder. Once we verified that the account was working I moved the desktop copy to the trash and again verified the account (just to be safe).
    Hope this helps someone else.

  • Iphone not recognised after restore from time machine?

    Hi folks,
    I suffered hard drive failure earlier this week and Apple installed a new one for me with the same OS as before (Leopard).
    I restored a six month old backup via time machine, but the computer isn't now recognising my iPhone - either in iTunes or iPhoto. In the six months since I last backed up, I upgraded my handset from a 3GS with software 3.01 to a 4S with the newest software; could this be why my Macbook isn't recognising the phone? I don't know what to do, I've tried all the basic stuff the Apple site advises but no luck and I could do without a trip to a genius bar unless absolutely necessary
    Thanks in advance.

    I have also tried uninstalling iTunes and reinstalling Mobile Device Support - no luck.

  • User not showing after restoring from time machine backup

    I was having issues with my 2009 Macbook pro. took it to the Genius Bar. Diagnosistics all showed ok. (I had done troubleshooting before I had the appointment). They suggested wipe and reinstalll from my time machine backup. I agreed.
    Returned home to do the reinstall. When I went to log in found that one of my user accounts did not show in the log in - only my main and "guest" accounts. On checking the "users" folder the user is present. It also does not show in the system preferences user screen but when I try to recreate it says it exists. Note I have done this wipe and reinstall with Mavericks
    Help! Most of the content I have on my main BUT there are several things that are not.
    Thank you for your attention.

    Issue solved with visit to Genius Bar.
    As I understand it here are the steps the Genius did. Attempt to create the account (system preferences->users) with the same information. It will say it already exists. Very carefully read the options. One will say use the existing account. BE CAREFUL because one option will wipe your data.
    If you need to do this it might be worth the trip to the Genius Bar as you could wipe your data. One precaution I took was to bring a full copy of that user account onto my desktop (from the backup immediately before the wipe) in addition to the one in the user folder. Once we verified that the account was working I moved the desktop copy to the trash and again verified the account (just to be safe).
    Hope this helps someone else.

  • Kernel Panic after restoring with Time Machine

    I'm trying to replace my 250GB HD with a 500GB one, but when I reboot after the TM restore, I receive a kernel panic. The message contains the error "panic .... /sbin/launchd, errno 8 ....", and then gives the stack trace. I think errno 8 is 'incorrect format', but I'm not sure what that means in this case. I don't know what to do next, and could use some suggestions.
    Here is the procedure I used:
    - Backup everything with TM to an external drive (500GB HD)
    - replace HD
    - boot from original OS X install DVD (10.5.5)
    - create a single volume on the new HD, using the whole HD
    - Restore from TM backup (completes in about 3 hours)
    - Boot from new HD - kernel panic each time
    A couple notes:
    I verified that /sbin/launchd exists on my TM backup.
    - I'm running 10.6, but I tried booting from my snow leopard disk (which I ordered shortly after receiving my computer), and that did not work, so I went back to using the original one I received with my computer (leopard). Could this be causing the problem?
    - The machine boots fine when I re-install the original 250GB drive, so I know I don't have any other h/w failures
    - With the new restored HD inserted as well as the install DVD, the machine wants to boot each time from the HD, and not the DVD, giving me an endless loop of kernel panics. I thought it would boot from the DVD if it's installed. Is there a way to over-ride, and select the media from which to boot?
    Any thoughts or suggestions are much appreciated.
    Thanks,
    Jeff

    WoodShavings wrote:
    Thank you for the quick response. Booting from the SL DVD, partitioning, and then a full restore has worked.
    Great!
    It did take a bit for me to figure out how to select the SL DVD - the HD already had a restore on it that was causing the panic. The 'alt' key is a great trick for selecting your boot device.
    So is the "C" key. That will boot from the CD (or DVD) in the SuperDrive.

  • TS3423 Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not s

    Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not start?

    sonjadg,
    you can purchase a replacement pair of grey installation DVDs for your MacBook Pro from either Apple or iFixit. If Startup Manager is only showing an OS X Installer volume, then it sounds like the Mavericks installer had a problem midway through its installation process. To fix this, you’re going to need to erase your internal disk and reïnstall your original version of OS X from the grey Mac OS X Install DVD, use Software Update  to get it back to 10.6.8 (presuming that your MacBook Pro originally came with Snow Leopard), and then restore from Time Machine.

  • Problems after doing full restore with Time Machine

    If I reinstall Leopard and and do a complete restore with time Machine, I have to erase my Time Machine backup drive and do a complete TM backup from scratch because TM will not pick up where it left off doing incremental backups. It wants to start over like it's never done any backups at all. It's a pain because it take me 4 or 5 hours to back up 270 GB. I've had to do this twice so far because once I had a problem with my startup drive and just today I made an external hard drive with leopard and restored all my files via TM.
    Is there anyway to get out of starting over from scratch when I do a full restore with TM ?

    The following procedure works for me if your restore happens to be from the last backup that Time Machine completed. (I'm not sure if it would work just as well if you restore from an older point in the Time Machine history -- but it certainly should!):
    After you complete the full restore (which will force a Restart when it completes), log in and then immediately go to System Preferences / Time Machine and Turn Off Time Machine to prevent any premature additional backups.
    Now go to System Preferences / Spotlight / Privacy and drag the icons for all your hard drives (including your main hard drive and the Time Machine hard drive) from the Desktop into the Privacy list. This will stop Spotlight indexing of all these drives to speed things up for what follows. You will do the indexing later (see below).
    If you have any sort of automatic virus protection active, disable it at this point to speed up what follows.
    Then Restart again (to get things into a fresh state), and then immediately do a Repair Permissions for your main hard drive (using Applications / Utilities / Disk Utility). Be patient. This will take 30 minutes or more and the progress bar may not advance until the very end. Do not be alarmed when several hundred notifications come up, as most of them are minor tidying up items, but some are significant. For example, you will see the ownership get adjusted for every help file in every language for every Lexar printer the system knows about (minor). You will also see the permissions adjusted for the root directory of your main hard drive (significant).
    And all of these permission and ownership repairs will happen EVEN THOUGH the files you backed up into your Time Machine may have had no such problems. They are, apparently, a result of the method that Time Machine uses to rebuild your file system during the restore.
    When the permission repair eventually completes, Quit Disk Utility and Shut Down the computer.
    Now reset the Parameter memory (PRAM). PRAM holds copies of certain system settings for rapid access. To do this, hold down the 4 keys Apple-Option-P-R continuously and press and release the power button. When you hear the SECOND startup chime, release those 4 keys. The system will continue to boot up normally. This makes sure the system's Parameter memory is in sync with the System Preferences resulting from the restore you just completed. It probably would have been anyway, but this makes sure. Among other things, this makes sure the system takes proper note of your "computer name" (System Preferences / Sharing) which is crucial to Time Machine's ability to recognize and use your previous backup database on the Time Machine hard drive.
    Now log in and fire up Mail to let it automatically finish the restore of its mailboxes by importing the necessary mail lists. Quit Mail when it finishes.
    If you have any other, application specific tasks to perform to complete the restore for any other applications, now is the time to do them.
    Finally, go back into System Preferences / Spotlight / Privacy, select the line showing your main hard drive in the list, and click the "-" on the bottom to remove it from the list. Repeat this for every other hard drive EXCEPT for your Time Machine hard drive. Exit System Preferences. Spotlight will now begin to re-index those hard drives from scratch. Watch this by clicking on the Spotlight icon in the menu bar. Wait for indexing to finish.
    Your restore is now at the point where you can let Time Machine do a new backup.
    I suggest you Restart again to get things into a fresh state (not truly necessary, but it is what I do). Then go into System Preferences / Time Machine and, at long last, Turn On Time Machine again. Then do a Back Up Now (right click on the Time Machine icon in the dock and select Back Up Now from the pop up menu).
    Because of the restore, Time Machine will now do a Deep Traversal of your entire file system looking for EVERYTHING that has changed compared to the last backup on its hard drive (rather than depending on the file system transaction logs as it normally does to make incremental backups happen much faster). The "Preparing" stage for this will take a long time -- about as long as a Repair Permissions pass in Disk Utility. Eventually Time Machine will start transferring files. This will be a backup of significant size because all the permissions repairs you did above, etc., count as changes as far as Time Machine is concerned, not to mention that certain portions of the file system are rebuilt during the restore. But it should be WELL SHORT of actually doing a complete backup of everything on your system. I.e., it is just a particularly large, but nevertheless incremental, backup added on to the previous stuff on your Time Machine disk.
    Crucial to this is that Time Machine recognizes the prior database on its hard drive as applying to your computer. Thus the permissions repair and PRAM resetting steps above.
    When that backup eventually completes, go into System Preferences / Spotlight and remove your Time Machine drive from the Privacy list. Exit System Preferences and wait for Spotlight to finish re-indexing your Time Machine drive.
    Restart once again, just to get things into a fresh state, and then re-enable any antivirus "live protection" stuff you disabled above.
    You are done.
    From this point on, Time Machine should do "normal" incremental backups, and the previous history of Time Machine backups should be accessible and used by Time Machine just as before.
    --Bob
    Message was edited by: BobP1776

  • Mail and Safari Crash after Full Restore with Time Machine

    I did a complete restore with time Machine. I opened Mail and it did it's thing importing all the mail and creating it's new index and folders. Now Mail and Safari will not work. They crash every time I open them.
    They were working fine, the only reason I did the restore was I inadvertently formated my hard drive while trying to install boot camp.
    Anyone have any idea what to do?
    Mario

    I have exactly the same problem as iGin. All other programs appear to be behaving normally, just Apple Mail and Safari crash immediately after starting them up - very annoying!

  • OS X Restore with Time Machine via LAN does not work

    Hi all,
    i did a full backup of my mac mini with mountain lion on a time capsule via LAN. Tried to do a full restore on a new hard disk and connect to the time capsule after i booted into a restore environment. I was able to choose the time capsule as the restore source and connected using my dedicated backup user, which was also used to create the backup before. But after i cannot chose my just created backup!
    Using a local USB disk with time machine everythings workes fine. But the main reason why i chosed time capsule is, that i can make my backups of all the used mac books and minis  via LAN / WLAN...
    So, is there anybody else experiancing this Problem?
    Regards,
    David

    Hi,
    tested OS X Restore with Time Machine via QNAP NAS Box - working without any problem. So with the Time Capsule it might be firmware problem?!
    Will update thies Thread when i've any news...
    David

  • Hard drive not appearing during restore from Time Machine?

    While attempting to restore Time Machine from an external drive to my new MacBook Pro, the hard drive doesn't appear in the graphic.  A second external drive I have does appear, but not the Macintosh HD.  Suggestions?

    Howdy dlayne40,
    If your hard drive is not showing in Time Machine, check it with Disk Utility.
    OS X: If you can't back up or restore with Time Machine - Apple Support
    Check your Drives
    Use Disk Utility to check your startup disk and any external drives you are using for backup.
    Repair any issues and try again.
    Best,
    Nubz

  • Restoring with Time Machine help!!!

    I have searched for many hours for an answer to my problem to no avail. I have seen multiple discussions on here about this issue, but none seem quiet the same.
    I use an Intel iMac, 500GB, Snow leopard, and all the most current updates.
    While trying to cmd+q Safari from the ESPN fantasy page I received the spinning rainbow ball. I gave it about ten minutes to quit and nothing. I tried to key a force quit and nothing. So I then did a hard reset pressing the power button. Once it restarted the screen froze on the grey startup and seconds later gave me the Folder with a question mark icon flashing. I found the Snow Leopard install disc and put it in to restart. I restarted and held "c" while doing so.
    Mac OS X Installer appears and I follow it to a point where I can select >utilities and select disk utility or restart from back up.
    I first tried to use my Time Machine backups that are stored on a Lacie 1TB external, but I receive a message that "this disk does have enough space." I tried selecting all the way back a year ago when I started using it to restore. No luck.
    Next I tried going to the >utilities >disk utility selection and it only shows the install cd and a hard disk labeled "Media" but in the Total cpacity: it reads 0 Bytes. I don't know where to go from there.
    Now I am am deleting the back ups from August 1, 2010 and before to try and free up space and attempt a restore with Time Machine.
    Does anyone have any ideas or solutions or anything. I have 120GB of music, CS5, Logic Pro 9, Office, and many other programs all at risk. Yes, I paid for all of them. I just don't have time to spend installing it all again, especially when some of my work depends on them.
    Tragic, huh!
    Thank you
    Chuck

    CSmith615 wrote:
    Okay, so I have mentioned this twice, in both post that I have written, the hard drive is not showing in the disk utilities,
    Yes, I understand you can't see the +*internal HD.+* I advised you to do a +*repair disk+* on your backups.
    Tell me that there is nothing I could have done, that it was on the verge of crashing since it was probably under a lot of stress.
    Correct; other than dropping your Mac or having it zapped by a power surge, you didn't break the internal HD.
    I have already erased some of the backups from August 1 2010 and before. I still have from this past sunday, 21st until August 2nd. Please elaborate how it will corrupt the backups. I plugged the external into my macbook pro and trashed those backups mentioned before.
    The message you were getting was that there wasn't enough space on the internal (since it showed zero), not the backups.
    If you did that via the Finder or Terminal, they may be corrupted.
    Unfortunately, Apple doesn't do a very good job of warning folks not to do that.
    You shouldn't have to delete things there, since Time Machine will do it automatically when the disk gets full. But if you want or need to, you can do it via Time Machine without harm. See #12 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
    So, repair them per #A5 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum). If they're ok, or can be repaired, your best bet when you get your Mac back is to do a full system restore, per #14 in the FAQ.

  • I'm having a problem with logging into a FileVault-protected user account after restoring from Time Machine backup.

    Hi all,
    My computer had been running really slowly for a while, so I decided to erase the whole hard drive and reinstall the operating system, and then I was going to restore the files I cared about from Time Machine. The main account, which had all my documents and photos, was FileVault-protected. The last thing I did before erasing the hard drive was to run one last Time Machine backup. As far as I remember, I always ran Time Machine backups with the FileVaulted user logged in.
    I don't remember whether I was using FileVault 1 or 2. I had been using FileVault 1, but I installed Lion as soon as it came out and I thought I had migrated to FileVault 2 at that point.
    Once I erased the hard drive and reinstalled the operating system, I browsed the Time Machine disk and, within the Users folder, there was no folder for the main user account. When I tried to reinstall everything by restoring from Time Machine backup, I'd get the option for all the user accounts, but when I tried to log in with the main one I'd get the dreaded "You are unable to log in to the FileVault user account "User" at this time. Log in failed because an error occurred." Finally, when attempting to restore from the Time Machine backup again, I noticed something strange: After the computer got to about 10% done restoring, it declared itself completed successfully and rebooted.
    I've tried a number of tips that came up from questions about similar issues on the Apple support forum, but had no luck. Is there any way to get these files back? Did they ever even get backed up?
    Thanks.

    Hroodbwai wrote:
    I can't find it! not sure what's going on but the only folder shown is the " Shared" folder.
    Did you have only the one user account? If there were others, they should also be in the "Users" folder. You probably won't have access to the files inside them, but they should be there.
    From what can make out, it looks like it's not backed up any of the files for the filevault account. Can't see user folder when looking through previous backups in Time Machine galaxy view.
    Are you doing that from a Finder window set to your internal HD, or your computer name? It should look something like this (with the Finder in List view):
    |
    |
    I'd been logging out and backing up manually on a regular basis.
    Scheduled backups should run normally; but they won't back up the File Vault sparse bundle, nor will any run manually.
    The only time it's backed-up is when you actually log out.
    You should have seen this window on logout:
    |
    |
    followed by this one:
    |
    |
    If you didn't see the second one, or cancelled it, the account wasn't backed-up.

  • After restoring from Time Machine to new Hard drive, system will not boot

    I replaced my hard drive on my Macbook (2008 model) with a larger drive. I then put in my Snow Leopard disk, and followed the steps to restore from Time Machine backup. a few hours later it said it was restored, but when trying to boot up, I just get a blue screen with an occasional flicker to the Leopard screen. I tried an earlier back up as well but with the same results. Any suggestions??

    Same exact problem here just yesterday, folks.
    Got a bigger hard drive on my MacBook Pro (15-inch Core 2 Duo) and installed it. Followed the restore procedures from Gizmodo (http://gizmodo.com/333319/the-secret-of-the-time-machine+assisted-hard-drive-swa p). Then got the blue screen immediately after the chimes.
    I only managed to transfer my old disk content by using CarbonCopyCloner.
    Having said that, your solution looks uselful, Portland Mac! :
    Portland Mac wrote:
    ... But when I decided to try and just do a fresh install and work my way back through all my software, I started by installing Snow Leopard and suddenly it boots and everything from my Time Machine backup is there...
    But I would not say the following:
    Portland Mac wrote:
    ... On a new drive apparently you have to install Snow Leopard before you do a time machine restore.
    Am I mistaken, or did you do a fresh install after restoring your TimeMachine backup?
    In any case, I found an interesting Apple article that might confirm that there is a problem: [Mac OS X v10.6: Issues after restoring a Mac from a Time Machine backup made with a different Mac ("Restore System From Backup…")|http://support.apple.com/kb/TS3243]. Or is it a completely different thing?
    And another discussion that might give some good advice: [http://discussions.apple.com/message.jspa?messageID=12578529#12578529]. Personally, I will now do as the man says: two backups, on two different external hard drives, using different apps, the other one being CarbonCopyCloner...
    For info, and I don't know whether that matters, my backup disk had been full and some past content had been erased automatically by Time Machine. But I don't think this should have mattered...

  • I'm not bald yet, but will be after messing with Time Machine

    Intel iMac Rev B. Two external drives, both less than 6 months old, one less than a week old. Maxtor 750GB, Seagate Freeagent Pro 1TB (bought last week).
    Per previous support posts, Time Machine stopped working smoothly after my update from 10.5.2 to 10.5.3. After working that issue out, it seemed to be working again.
    Long story short, I can't get TM to work on either drive. I have erased, re-partitioned (in the correct format for the Intel iMac), restarted TM and I get a multitude of issues. Sometimes the initial back up goes through, sometimes it doesn't. Sometimes the backups work as they should for a week, and sometimes, stop working after the first incremental backup.
    I went out last week and bought the Seagate to confirm the problem wasn't a hard drive issue. I'm finding it next to impossible that I've got two bad drives that won't work with Time Machine, so I clearly think this is an Apple Software issue. As now I've got the Maxtor drive partitioned and doing A and B backups with SuperDuper.
    It's getting expensive buying external harddrives. What other support for Time Machine is out there?
    **Note - I have not applied the latest 10.5.5 update yet....anybody find that Time Machine works better with that update??**
    Thanks.
    CP

    I let TM run through the night, here are another set of errors:
    9/17/08 8:27:45 PM /System/Library/CoreServices/backupd[4519] Starting standard backup
    9/17/08 8:27:45 PM /System/Library/CoreServices/backupd[4519] Volume at path /Volumes/Untitled 1 does not appear to be the correct backup volume for this computer. (Cookies do not match)
    9/17/08 8:27:51 PM /System/Library/CoreServices/backupd[4519] Backup failed with error: 18
    9/17/08 8:28:41 PM /System/Library/CoreServices/backupd[4519] Backup requested by user
    9/17/08 8:28:41 PM /System/Library/CoreServices/backupd[4519] Starting standard backup
    9/17/08 8:28:42 PM /System/Library/CoreServices/backupd[4519] Backing up to: /Volumes/Untitled 1/Backups.backupdb
    9/17/08 8:28:42 PM /System/Library/CoreServices/backupd[4519] Ownership is disabled on the backup destination volume. Enabling.
    9/17/08 8:28:43 PM /System/Library/CoreServices/backupd[4519] Event store UUIDs don't match for volume: Macintosh HD
    9/17/08 8:28:48 PM /System/Library/CoreServices/backupd[4519] Backup content size: 225.7 GB excluded items size: 2.1 GB for volume Macintosh HD
    9/17/08 8:28:48 PM /System/Library/CoreServices/backupd[4519] No pre-backup thinning needed: 268.30 GB requested (including padding), 931.15 GB available
    9/17/08 8:28:48 PM /System/Library/CoreServices/backupd[4519] Waiting for index to be ready (909 > 0)
    9/17/08 8:30:13 PM /System/Library/CoreServices/backupd[4519] Error: (-36) copying /Applications/Amadeus II.app/Contents/Resources/spec.icns to /Volumes/Untitled 1/Backups.backupdb/cpstaley/2008-09-17-202843.inProgress/C156F7E0-03C5-4759-A57 4-17A29DFC28AA/Macintosh HD/Applications/Amadeus II.app/Contents/Resources
    9/17/08 8:30:13 PM /System/Library/CoreServices/backupd[4519] Stopping backup.
    9/17/08 8:30:14 PM /System/Library/CoreServices/backupd[4519] Error: (-8062) copying /Applications/Amadeus II.app/Contents/Resources/spec.icns to /Volumes/Untitled 1/Backups.backupdb/cpstaley/2008-09-17-202843.inProgress/C156F7E0-03C5-4759-A57 4-17A29DFC28AA/Macintosh HD/Applications/Amadeus II.app/Contents/Resources
    9/17/08 8:30:15 PM /System/Library/CoreServices/backupd[4519] Copied 6 files (184.0 MB) from volume Macintosh HD.
    9/17/08 8:30:15 PM /System/Library/CoreServices/backupd[4519] Copy stage failed with error:11
    9/17/08 8:30:21 PM /System/Library/CoreServices/backupd[4519] Backup failed with error: 11
    9/17/08 8:39:07 PM /System/Library/CoreServices/backupd[4552] Starting standard backup
    9/17/08 8:39:08 PM /System/Library/CoreServices/backupd[4552] Volume at path /Volumes/Untitled 1 does not appear to be the correct backup volume for this computer. (Cookies do not match)
    9/17/08 8:39:13 PM /System/Library/CoreServices/backupd[4552] Backup failed with error: 18
    9/17/08 8:50:31 PM /System/Library/CoreServices/backupd[4563] Backup requested by user
    9/17/08 8:50:31 PM /System/Library/CoreServices/backupd[4563] Starting standard backup
    9/17/08 8:50:44 PM /System/Library/CoreServices/backupd[4563] Backing up to: /Volumes/Untitled 1/Backups.backupdb
    9/17/08 8:50:46 PM /System/Library/CoreServices/backupd[4563] Event store UUIDs don't match for volume: Macintosh HD
    9/17/08 8:51:07 PM /System/Library/CoreServices/backupd[4563] Backup content size: 225.7 GB excluded items size: 2.1 GB for volume Macintosh HD
    9/17/08 8:51:07 PM /System/Library/CoreServices/backupd[4563] No pre-backup thinning needed: 268.30 GB requested (including padding), 930.96 GB available
    9/17/08 10:55:09 PM /System/Library/CoreServices/backupd[4563] Error: (-36) copying /Users/cpstaley/Desktop/Downloads Folder/Mid-A 2007/Pictures/mida06plcv.tif to /Volumes/Untitled 1/Backups.backupdb/cpstaley/2008-09-17-202843.inProgress/8BE09425-3E04-4BB8-A73 2-B4ED95F162E1/Macintosh HD/Users/cpstaley/Desktop/Downloads Folder/Mid-A 2007/Pictures
    9/17/08 10:55:09 PM /System/Library/CoreServices/backupd[4563] Stopping backup.
    9/17/08 10:55:09 PM /System/Library/CoreServices/backupd[4563] Error: (-8062) copying /Users/cpstaley/Desktop/Downloads Folder/Mid-A 2007/Pictures/mida06plcv.tif to /Volumes/Untitled 1/Backups.backupdb/cpstaley/2008-09-17-202843.inProgress/8BE09425-3E04-4BB8-A73 2-B4ED95F162E1/Macintosh HD/Users/cpstaley/Desktop/Downloads Folder/Mid-A 2007/Pictures
    9/17/08 10:55:09 PM /System/Library/CoreServices/backupd[4563] Copied 96097 files (22.9 GB) from volume Macintosh HD.
    9/17/08 10:55:09 PM /System/Library/CoreServices/backupd[4563] Copy stage failed with error:11
    9/17/08 10:55:15 PM /System/Library/CoreServices/backupd[4563] Backup failed with error: 11
    9/17/08 11:39:07 PM /System/Library/CoreServices/backupd[4563] Starting standard backup
    9/17/08 11:39:19 PM /System/Library/CoreServices/backupd[4563] Volume at path /Volumes/Untitled 1 does not appear to be the correct backup volume for this computer. (Cookies do not match)
    9/17/08 11:39:24 PM /System/Library/CoreServices/backupd[4563] Backup failed with error: 18
    9/18/08 12:39:06 AM /System/Library/CoreServices/backupd[4563] Starting standard backup
    9/18/08 12:39:18 AM /System/Library/CoreServices/backupd[4563] Volume at path /Volumes/Untitled 1 does not appear to be the correct backup volume for this computer. (Cookies do not match)
    9/18/08 12:39:23 AM /System/Library/CoreServices/backupd[4563] Backup failed with error: 18
    9/18/08 1:39:06 AM /System/Library/CoreServices/backupd[4563] Starting standard backup
    9/18/08 1:39:18 AM /System/Library/CoreServices/backupd[4563] Volume at path /Volumes/Untitled 1 does not appear to be the correct backup volume for this computer. (Cookies do not match)
    9/18/08 1:39:23 AM /System/Library/CoreServices/backupd[4563] Backup failed with error: 18
    9/18/08 2:39:06 AM /System/Library/CoreServices/backupd[4563] Starting standard backup
    9/18/08 2:39:18 AM /System/Library/CoreServices/backupd[4563] Volume at path /Volumes/Untitled 1 does not appear to be the correct backup volume for this computer. (Cookies do not match)
    9/18/08 2:39:23 AM /System/Library/CoreServices/backupd[4563] Backup failed with error: 18
    9/18/08 3:39:05 AM /System/Library/CoreServices/backupd[4563] Starting standard backup
    9/18/08 3:39:18 AM /System/Library/CoreServices/backupd[4563] Volume at path /Volumes/Untitled 1 does not appear to be the correct backup volume for this computer. (Cookies do not match)
    9/18/08 3:39:23 AM /System/Library/CoreServices/backupd[4563] Backup failed with error: 18
    9/18/08 4:39:05 AM /System/Library/CoreServices/backupd[4563] Starting standard backup
    9/18/08 4:39:17 AM /System/Library/CoreServices/backupd[4563] Volume at path /Volumes/Untitled 1 does not appear to be the correct backup volume for this computer. (Cookies do not match)
    9/18/08 4:39:22 AM /System/Library/CoreServices/backupd[4563] Backup failed with error: 18
    9/18/08 5:39:05 AM /System/Library/CoreServices/backupd[4563] Starting standard backup
    9/18/08 5:39:17 AM /System/Library/CoreServices/backupd[4563] Volume at path /Volumes/Untitled 1 does not appear to be the correct backup volume for this computer. (Cookies do not match)
    9/18/08 5:39:22 AM /System/Library/CoreServices/backupd[4563] Backup failed with error: 18
    I'm backing up again with SUperDuper and then will move onto 10.5.5. Hopefully the errors are resolved with the update.
    CP

Maybe you are looking for

  • Installing Devices Stuck at 98%

    Good morning! I've recently taken control of my company's MDT server and we're running into issues with certain Windows 7 x64 deployments not finishing on our HP Z420's. We know the .wim is fine because we don't always have problems installing, all H

  • Connecting an iPad 2 to a computer monitor

    I'm trying to locate a 30-pin-to-DVI adapter to connect my iPad to a computer monitor. I've seen questionable reviews of the two online sites -- DX.com and DinoDirect -- that claim to offer the product. Is there a store in Vancouver that carries the

  • Help with .mkv files to DVD

    Can anyone please advise what's the best way to put/convert MKV files onto DVD disk while maintaining the highest playback quality possible? As an absolute beginner to video recording, here's what I'm doing at the moment: I'm opening the files with Q

  • Problems bitmap filters FlashBuilder 4.7 / Air3.4 - Help!

    Yesterday, I purchased and installed FlashBuilder 4.7, 64 bit windows version. With it, I built my project for ios, and installed an export release (air3.4 for ios) on my IPad 1 for testing. Two "unforgivable" problems showed up: 1. Most of the artwo

  • Why can't I view quicktime thumbnails on my pc windows xp?

    I have "view thumbnails" turned on in the options, but all I see are Quicktime icons rather than a frame of video. I had the capability to see thumbnails of video before, but they disappeared. How do I get them back? It is ten times harder to do vide