HT201263 how to fix error 9 for recovery
How do I fix error (9) for recovery in i tunes?
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Similar Messages
-
How to fix error 3914 of itunes for windows...?
How to fix error 3914 of itunes for windows...?
Queries1 :- Where i need to type the above command to get the version of cygwin and make.From the command prompt -- Make sure that the Cygwin Bin directory is set in the Path (Refer to the same doc, 7. Add Cygwin Bin Directory to Path). You could also search for make.exe file to verify the directory where all those executable files are located.
Thanks,
Hussein -
HT201442 How to fix Error 3194 or "This device isn't eligible for the requested build"
how can fix Error 3194 or "This device isn't eligible for the requested build
Generally the result of a jailbroken or hacked phone.
-
how to fix error 3 for ipad mini retina... i did anything recovery mode dfu etc i need your help please...
Red through this for help: http://support.apple.com/kb/ts3694#3
-
HT201413 how to fix error type 21?
how to fix error type 21?
Hi ekafrommiami,
Thanks for visiting Apple Support Communities.
You may find the steps in this article useful for troubleshooting the error you're seeing:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
Best,
Jeremy -
How to fix Error Code: U43M1D204?
How to fix Error Code: U43M1D204? When trying to update.
Hi There,
Kindly check the name and version of update and try to install there patch manually from the below mentioned links.
All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
If you are not able to install the patch,Kindly try
Enabling and using the "root" user in OS X - Apple Support
Hidden Admin (Windows): Enable and Disable the Built-in Administrator Account (Standard 7 SP1)
You can also try :Troubleshoot update issues | CS5, CS5.5, CS6
Thanks,
Atul Saini -
Please help me how to fix error 53 iphone 6 ios 8.1
please help me how to fix error 53 iphone 6 ios 8.1 when update iphone 6
Hey there fcaride,
It sounds like you are unable to finish restoring with iTunes due to this error -1 message. Usually that is associated with security software. Use the steps from the following article to help with that:
Get help with iOS update and restore errors
Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Make sure that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
If the issue persists, I would next use the last section of the following article titled "If your device turns on but gets stuck during start up"
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
Thank you for using Apple Support Communities.
All the very best,
Sterling -
How to fix error 2? my phone got it when firming software update while restoring.
How to fix error 2? my phone got it when firming software update while restoring.
Hi Elzani Jasmine,
Thanks for getting the error number. Here is an article for suggestions with specific error numbers.
Resolve iOS update and restore errors
http://support.apple.com/kb/ts3694
Note it links to the following for things to try first.
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/TS1275
Thank you for thinking of Apple Support Communities for your support needs.
Nubz -
How to fix error 2001 in ipod pls pls tell
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
my iphone has stuck in the recovery mode and not giving a apple logo.and how to fix error 13
hardware failure take it to apple to fix
-
i want to know how to fix error twenty nine
Howdy KendelGilbert,
It sounds like you are trying to sync your phone with iTunes and are getting an error code 29. I found this article for you that should help you troubleshoot that error, and explains a bit about what can cause it to occur named:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694#error29
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, and 40
These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
Thank you for using Apple Support Communities.
Regards,
Sterling -
any body knows how to fix error 9006 on itunes
Hello darin1986,
Thank you for using Apple Support Communities.
The following article addresses resolving issues in iTunes, including error 9006.
Resolve issues between iTunes and security software - Apple Support
Regards,
Jeff D. -
Any ideas how to fix error 0X80092013? I cannot connect to I Tunes Store.
Hi there mlbfromca!
I have a couple of articles here that can help you troubleshoot your connection to the iTunes Store. First, this article outlines the basic steps for troubleshooting an issue with your connection to the iTunes Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Be sure to note the steps for continuing troubleshooting at the end of the article if the issue is still unresolved:
If the steps above did not resolve your issue, be sure that your specific alert is not listed in iTunes: Possible iTunes Store errors. Then, if your issue is still unresolved, follow steps in iTunes: Advanced iTunes Store troubleshooting.
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
How to fix error 9001 in instal application?
how to fix error code 9001 in instaling application?
hi ravenas,
thanks for the reply.
anyways, is it possible that whenever guest logins into the system, the windows page bounds configuration like front panel bounds in labview be fetched so that the same will be configured to the vi's front panel programatically.
by doing this the windows components will automatically get hide.
or is there any better solution.
reply
thanks
samriddh sarbalhi
[email protected] -
How to fix 'error 501' in caldav
how to fix 'error 501' in caldav
Me too. To be precise,
The server responded with an error.
The request for account "[my POP account]" failed.
the server responded with "501" to operation
CalDavRefreshDelegateListQueueableOperation.
Possible responses are: Stay Offline or Go Online.
Neither option prevents the problem - the calendar keeps reminding me that it can't do something, until I quit the calendar.
Mail keeps going in and out, so the POP account appears to function.
Maybe you are looking for
-
Error 201; CC desktop app constantly logged out, won't redownload
Running CC on Windows 7, 64bit. Have run into the "Please log in/You are now logged out" loop before, so uninstalled the CC desktop app, renamed the OOBE file to OOBE_OLD, and attempted to re-download and re-install the CC app. This worked last time,
-
I have downloaded the trial version of Adobe Cloud, but when I try to install the program, it keeps telling me to connect to the internet. I AM connected to the internet. What am I doing wrong?
-
Memory Leak in Adobe Reader 9?
Hello, I have a C# application with a WebBrowser component in a Form and it opens a certain number of new browser pages with a link to a PDF file. When I close the main program (Not the individual forms with the browser links for PDFs), I get an App
-
How to adjust advance in part/full against invoice for payment to vendor
Dear Experts, I need all your expertise view on a scenario. what i am trying to do is like i have given advance to vendor 10000 and deduct 100 tds on it. now vendor send the invoice amount 30000 and we deduct tds by doing adjustment in invoice manual
-
Always show"Waiting for activation, it may take some time to"
I just bought a iphone5,but it always show "Waiting for activation, it may take some time to",i just can use Wifi,don't know what happen