HT201263 I see the "Connect to iTunes" screen and the device appears in iTunes. Everytime I connect to iTunes, iTunes says my device is in recovery mode and has to be recovered so I do so. The same recovery message shows in iTunes after iTunes is complete
I see the "Connect to iTunes" screen and the device appears in iTunes. Every time I connect to iTunes, iTunes says my device is in recovery mode and has to be recovered so I do so. The same recovery message shows in iTunes after iTunes is complete. I have a iPod touch 64gb. I have no idea what OS is on it now that iTunes has tried to recover it and erased all info.
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
iTunes: Specific update-and-restore error messages and advanced troubleshooting
Similar Messages
-
Hi my iphone 5 is on recovery mode and I connect it with the computer but it's failing to restore the device the message is showing iphone restore failed!!!!!
Hi Bobi1346,
Thank you for visiting Apple Support Communities and for including the error number you are getting.
There's an article for troubleshooting that error.
iOS: Restore errors 4005, 4013, and 4014
Try these steps to resolve the issue:
Install the latest version of iTunes.
Restart your computer.
Make sure your computer is up to date. If an update requires a restart, check for updates again after you restart.
Learn more about updating OS X.
Learn more about updating Windows.
Restore using another USB cable.
Restore your device on another computer.
If you continue to see error 4005, 4013, or 4014 when you restore your device, contact Apple for support.
Take care,
Nubz -
Hi,
my phone is in recovery mode and wont restore. instead i receive the error message 1604. i have used alternative usb cables and am at a loss. has anyone else had this problem?Hi there hstear93,
You may find the information in the article below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W. -
Get three quarters of the way through recovery mode and then iphone goes back to "Connect to Itunes screen" can someone help please?
Delete the .ipsw file on the computer.
Put the device in DFU mode.
Restore as new, once the restore completes, then try restoring from backup. -
It is normal, when your ipad is in recovery mode and your itunes starting downloading 1 item (ipad software update) and in few minutes my ipad screen back to the apple logo?? It is ok ?
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Or try using one of these programs to place the iPod in recovery mode
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella -
have an iphod touch in recovery mode and hooked into the computer to restore it, because the kids forgot password and locked it up.now say software server cannot be contacted what do i do now?
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem -
my ipod was in recovery mode and fixed it. i can use it. but the problem is whenever am i connect it with itunes it says IPOD is in recovery mode even after recover is done. i cant sync ipod rite now. it showing same msg again. nyone knows wat to do plz??
I did the restore and it cleared and reset the iPod but after it finished the same error came up. I tried this 3 times. Also it no longer shows up as a drine in My Computer.
if it's relentlessly doing that to you, it's plausible that the message is being caused by a Windows drive letter confusion. (that's consistent with the disappearance for My Computer, too.)
see the following article for troubleshooting information on that possibility:
"iTunes has detected an iPod in recovery mode - Use iTunes to restore" -
Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks
In the article Resolve iOS update and restore errors this is what it says about error 14:
Check your USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
To narrow down the issue, you can also change up your hardware:
Use the USB cable that came with your device, or a different Apple USB cable.
Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
Try a different computer.
If necessary, resolve any further issues with the USB connection, then with your security software.
If you're still seeing the error message, check for hardware issues by following the next section. -
my iphone 4 will not turn on but when connected to the pc in itunes it says my device is in recovery mode and when i do SHIFT restore and select my ipsw it extracts then this 3914 error message appears. i normal restore then it this error message appears 1601. and my iphone is in RECOVERY mode. and holding the power button and the home button doesnt do anything my latops just makes a ding sound after 6seconds. My iphone screen is just blank and will not come on and i really need help
Has the iPod been wetted?
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Try on another computer.
Also see:
https://discussions.apple.com/message/12690674#12690674
https://discussions.apple.com/message/13032101#13032101
Last, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
my ipad was in recovery mode and it went back to the home screen and it found my info on itunes to the point where i can put music on it but it still says connect to itunes
sarahwood wrote:
.. it said my iPod was in recovery mode and I needed to restore it?
Once the Device is asking to be Restored with iTunes... it is too late to save anything...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
To minimise loss... after the successful Recovery... Restore from the most recent Backup...
See Restore from Backup here
http://support.apple.com/kb/ht1766 -
My ipod touch 4 gen is in recovery mode and i dont know how to get out of it,i tried everything like hold the home and top button at the same time. All it did what g to the apple logo and went back to recovery mode any help?
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
kevinpowell1 wrote:
how can i get it out of recovery mode?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
iPad stops responding, showing the Apple logo only,i tried to place into recovery mode and attempted to restore again but after downloading the software, it brings error in downloading s/w message.can anyone help please.Thanks
http://support.apple.com/kb/TS3694#error14
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network. -
When I downloaded (on PC) the new 5 it crashed my iPad 2. I worked for two days to get it to stop the malfuction, went to the apple store for four hours, iPad crashed again, got a new one, new iPad crashed when I tried to restore my back up. Down loaded iTunes to an employees computer, I was able to restore iPad to factory settings but my itunes account is on my office computer and now I am afraid to plug it into my computer. I did delete the back up as maybe that is currupt and making it crash??? Any body know about this?
This is Linda again. The new iPad actually as not restored on my employees computer. I thought it was working. Message said the device is in recovery mode and can not be restored. I have been at the Apple store for a total of 6 hours and on the phone with support for at least 4 hours. And now the replacement has crashed??? Has this happened to any one else?
-
Hi my iPhone 4 won't turn on . When plugged in on several different chargers the following happens . Blank screen then apple sign for a short period then it buzzes and goes blank. Have tried power button and home button but no change ,When connected to mac get message that phone is in recovery mode and that i must restore this phone before it can be used with iTunes . Is this my last resort as I have some photoessays I don't want to loose.
PPlease helpHello, Chantal105
Thank you for visiting Apple Support Communities.
If your device is in recovery mode you will need to restore the device.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Cheers,
Jason H. -
started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?
Any numbers or other details on the mesages given?
Did you try to connect in recovery mode again? iOS: Unable to update or restore
In case your network connection timed out, check your security software settings: iTunes for Windows: Troubleshooting security software issues
Maybe you are looking for
-
Java.lang.StackOverflowError Error?
I have added a EJB diagram with two tables from HR database and created Java Serice Facade and call findall method in once of the business method (getDepartmentsFindAll). I am getting the the error below when I run the java service facade. Please hel
-
Hi everyone I have installed oracle database 11g on my pc and recently installed oracle developer suite 10g I am unable to connect to my database using oracle developer suite It's giving an error that "ORA-12154:TNS could not resolve the connect iden
-
The I4S is frequently hanging when a call is received after updating the Sw to version 8
After updating the Phone Software to version 8 the Instrument I4S hangs frequently when a call is received. You can see who is calling but the touch screen does not respond and only way is to switch off and on.
-
Report consuming a lot of temp Space (BIP)
Hi Experts, I am facing an issue. Some BIP reports consuming a lot of temp space (5-30 gb temp directory), which is causing service down (BIP, RMS, ReIM and RPM). BIP, RMS, ReIM and RPM are installed on same server. Please help to troubleshoot this i
-
Looking for tjacobs to answer a few questions about his StandardPrint Class
Hello, Hopefully tjacobs will see this post and answer it as soon as he has time. I am trying to use your Standard Print class in a program I am developing to Print a JPanel in a JScrollPane and am running into trouble. I will have more info for you