HT201263 IPad starts but will not display home screen.

IPad starts by will not display home screen. Seems to be suspended but will not respond.

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Similar Messages

Apache starts but will not display tn browser

I can start Apache using Terminal but I can not serve up a html page.
Not sure why.
OS X 10.9
greg

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Page loads but will not display

I have an IP address that allows me to view my cctv cameras.It works fine with Internet Explorer,but when i enter the same address in to my safari browser the page seems to load but will not display anything.
I assume its some thing do with my internet security settings but do not now where to find them to allow this site. Can any one help please.
Thanks

Try temporarily turning off your firewall via SystemPreferences>Security>Firewall. If the site then works you can turn the firewall back on and specifically allow Safari.

My Mac Air iphoto will display thumbnails but will not display photos in any way - single photo / slideshow etc - any ideas

My Mac Air iphoto will display thumbnails but will not display photos in any way - single photo / slideshow etc - any ideas?

Are you seeing this
when you double click on a thumbnail file? If so it's an indication that the file path/link between the thrumbnail and original, full sized file has been broken. Therefore, and assuming you're running iPhoto 9 or later, try the following:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window.
2 - Run Option #4, Rebuild Database.
OT

Hey Gurus I've just shot a seminar, three cameras, Cannon's reasonably new XA20HD's. File format 1920X1080 MP4 17mbs 25 frames. Am running PremProCS6. I import the files into Prem, they come in ok but will not display. Got a yellow bar and a yellow Media

Hey Gurus I've just shot a seminar, three cameras, Cannon's reasonably new XA20HD's. File format 1920X1080 MP4 17mbs 25 frames. Am running PremProCS6. I import the files into Prem, they come in ok but will not display. Got a yellow bar and a yellow Media Pending screen. What the? Have to cut this stuff soon! Wont even import into Media Encoder. Says there are no usable streams in the media! Just saw a podcast title about stress in the editing business. Better listen to the one! Any help would be most appreciated. J.

Copy ALL contents of SD card to a folder on edit hard drive. not just video clips, everything. Then in Premiere, import using Media Browser (tab at lower left of Premiere screen). This usually does the trick. There is metadata contained in the SD card files that is needed, not just the video clips alone.
Thanks
Jeff Pulera
Safe Harbor Computers

My mac is connected but will not display webpages

My mac says I'm connected to wireless interent, but will not display the webpage. It says that it is not connected to the interent. My hp computer is working though. Does anyone know what is causing it not to connect to the interent and what I can do to get it to connect?
Thanks

Make sure in the network settings that you arent trying to connect to the internet through a Proxy server, unless you actually are of course. Make sure the connection you are using is set to get its IP address via DHCP automatically, and that the router you are connecting to is set up to do so.

Itouch goes through restore process then will not show home screen

itouch goes through restore process then will not show home screen. Only apple logo shows and flashes periodically.

- Try:
iOS: Not responding or does not turn on
- If not successful and you can't turn the iPod fully off, let the battery fully drain. After charging for at least an hour try the article again.
- If still problem that indicates a hardware problem and an appointment at the genius Bar of an Apple store is in order.

I'm at work and my Mac book pro is saying its connected but will not display a web page. Others who have the MacBook is connected. Tried to restart. Please help

I'm at work and my MacBook Pro is connected wifi but a web page will not display. Other have the pros and is connect. Tried restarting but not working

You're not a liar. They should not charge you $90, it is within the 1-year warranty that comes with it and you are entitled to a free replacement. I have never had the problem myself on a 15 month old MacBook, so there must be SOMETHING that happened to it, maybe without you noticing. But might I recommend a wireless trackpad or Apple "Magic Mouse?"

Z97 PC MATE - Second GPU will not display / black screen

Using Z97 PC MATE with 2 nvidia cards (GeForce GTX970 and GeForce GETX750ti). My goal is to use the 750ti for dual display with the 970 reserved for compute in a 3D software package (houdini simulations). If both cards are installed on the mobo and one monitor is plugged into the 750ti, it will not display, not even the BIOS screen. Also there is no audio, there is normally a chime when the OS lock screen is reached and that never plays.
The 750ti is plugged into the PCEe 2.0 slot, the 970 the 3.0 slot. Both cards can display in their respective buses by themselves if only one card is installed. If both are installed, the 970 will output a display as expected. I have also tried an older quadro card in the 2.0 slot and it also defaulted to the 970 in the 3.0 slot. With one display plugged into the 970, and one in the 750ti I have gotten an image to display on the 750ti. But never with only one monitor plugged into the 750 attempting to use that card as the main display.
I have used m flash to update the bios to 4.6, but I never used the disc which came with the mobo to update. I thought maybe there is a GPU display priority in the BIOS but I'm not seeing it. I see there is a way to prioritize UEFI and legacy, and Gen1, 2 or 3, but don't know how that should be set up for this (if that is the problem). I would think if that were the case though the audio at the lock screen would still play, but I don't know.
My current nvidia driver version is 342.22, I am using Ubuntu 14.04 as linux OS operates better with the software I am using. I have also posted to the Ubuntu forums about this, but thought I would post here because the BIOS screen doesn't display which makes me think it could be hardware related. Although all of the hardware is detected properly and appears to be functioning as expected.
This issue was reproduced with and without the HDD connected.
Hardware:
i7 4790k
EVGA GTX970 and EVGA GTX750ti
Z97 PC MATE
32gb PNY DDR3-1866 240-pin DIMM
Antec Truepower Classic 750w gold certified
PNY Optima 480gb SSD - PNY SSD7SC480GOPT-RB
Hitachi 2TB ultrastar HDD
I am not sure at this point how to continue troubleshooting this issue, or if this is not possible for this mobo and I just didn't recognize that. One test I was considering is putting the 970 in my old computer (MSI 970FX-GD70) and seeing if the results are the same. Will post any additional required information.
thanks!

Did you install your graphic driver when both vgas are on? Let the driver detect both vga then you can just switch cable and display well. Use the latest 344.65 driver. As for the 3D package, you need to make sure the software support or can change the settings that which vga to compute.
But there's one thing I need to make sure first, does your vga work with only one vga on pcie 2.0 slot? Just wanna be sure it's not faulty slot...

HT4623 icant get ipod touch to turn on. the picture says to connect to itunes. when i connect to computer it says to enter pass code but will not gog to screen to enter code.help please

i can not get ipod touch to turn on. it shows picture to connect to itunes but it says to enter pass code but will not gogto screen to enter code. HELP PLEASE

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...

MY IPAD 2 WILL NOT LOAD HOME SCREEN. HOLDING THE HOME BUTTON AND RESTORE BUTTON WONT BRING UP APPLE LOGO EVEN AFTER A MINUTE. IT TAKES SCREEN SHOTS AND A BRIEF FLASH BUT THEN NOTHING. IDEAS?

I need help with the above question concerning home screen not loading and IPAD 2 won't reboot by holding home button and restore button for over a minute.

Anyone? C'mom, I know some of you techie type folks know how to fix this!

Only email lists showing, but will not display the message.

My email (gmail) will only show the list of messages. When you click on it and select a message it does not bring up the usual message screen. It stays blank and tells me no message selected, but I do have one selected. The mail list will slide to the left like its bringing the message up, but does not. Help.

Quit the mail app completely. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Launch mail again
Or ....Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

HT1338 unable to delete photos from trash file Why it starts but will not not finished task

can not delete from trash bin on iphoto will start but not finish WHY

Press and hold the Option key then select Empty Trash.
If that does not work try solving Trash problems.

App Store shows update available but will not display the update or tell me that there are no updates...

There is a badge with the number 1 on my "App Store" icon, but when I go to see what needs to be updated, the App Store does not display the app that has an update nor does it say that there are no updates available. Basically the place that tells me these things, is completely blank. I have the word "Updates" at the top of the screen and I can see an icon on the bottom right corner area that has the cirlce with a down arrow and the word "Updates" with a badge with the number 1 in it.
The iPad 2 has 6.1.2 for the iOS. I have already closed the app out completely by closing the app in the multitasking section and then restarting it. This does not correct the issue. I have also restarted the iPad 2, however this did not correct the issue either.
If anyone has seen this and knows it is a glitch in the software, and that Apple is aware of it, please let me know. If anyone knows how to correct this, please let me know. Thanks.

The update server is down; try this temporary workaround
App Store>Purchased>Select "All"
Note: Look out for apps that have the word "Update"
http://i1224.photobucket.com/albums/ee374/Diavonex/9c256282736869f322d4b3071bbb2 a82_zps51a6f546.jpg

Syncing PDF files into my iPad Mini, but will not show in iBooks

I am trying to sync PDF files into my iPad Mini but it will not appear in the iBooks app on my iPad Mini. I have tried to unselect the book and reselect, sync all or sync selected through iTunes. Still have not figured it out! There is 9.75gb left on my iPad Mini which is more than enough space for the PDF files.
Please help!
Thanks,
Linda

Hi Linda Van,
I'm sorry to hear you are having this issue with your iPad. If you continue to have issues syncing or reading PDFs in iBooks on your iPad, you may find the information and troubleshooting steps outlined in the following article helpful:
iBooks: Viewing, syncing, saving, and printing PDFs on iPhone, iPad, and iPod touch - Apple Support
Regards,
- Brenden

HT201263 IPad starts but will not display home screen.

Similar Messages

Maybe you are looking for