HT201320 How can I switch from one email user to another?

How can I switch from one email account to another?

You have to select between the two accounts in the mail app.
Say for instance that you are reading an email in your XYZ email account. Tap the button in the upper left corner of the mail app to back out all the way to where you can see all of the email accounts.... Tap InBox, then tap XYZ email Account and that will take you back to the main MailBoxes window.
Is that what you want to know? There is no way to simply "toggle" between the two accounts.

Similar Messages

  • How do you switch from one iTunes account to another on your apple tv?

    How do you switch from one iTunes account to another on your apple tv?

    Welcome to the Apple community.
    I assume you do mean a different account and not simply a different iTunes library. Unfortunately, in order to switch accounts, you would need to log out and log in to the second account.

  • If you do have two gmail email, how can you switch from one gmail to another?

    I do have to gmail account and i dont know how i can set up both of them on my iphone at the same time. How to switch from one email to another?

    You can add as many e-mail accounts as you want. Go to Settings>Mail, Contacts,Calendars to add them.
    When in the mail app,you can have all inboxes displayed together (unified inbox) or you can tap the "Mailboxes" arrow in the upper left and select which one you want.

  • In InCopy, how can I paste from one InDesign table to another without also copying formatting?

    I'm attempting to paste information from one indesign document to another, but the styles are different. Pasting without formatting not working in a table. When I paste over, it retains the container style from the original table.
    I have "Text Only" selected from my Clipboard Handling preferences, so I'm not sure what else to do. I know I can hit escape to switch to the text selection instead of a container, but this only selects the text from one cell. I'd like to copy over the entire table, instead of copying cell by cell.
    How can I paste a table into another, without copying the formatting?

    Copy/Paste whole cells will always retain formatting.
    What you have to do is: Copy/Paste Without Formatting the text contents of the individual cell.
    You have to do that individually for each cell, if you want to copy over text of a whole table.
    A better approach would be to:
    1. Copy the whole table to Excel (or a different spread sheet application)
    2. Copy again from that
    3. Select one single cell and paste
    In that case "Text Only" should be selected from the Clipboard Handling Preferences.
    Uwe

  • How can I link from one flash document to another with buttons?

    Hi,
    From the question above, you can tell that I'm very new to flash, especially with scripting. Total noob.
    I watched my instructor's videos and I'm still stumped. He didn't explain it very well.
    For starters, I am using Flash CS6, but I clicked on AS1.0 and AS2.0 from the drop down mention in the actionscript window for the script below, since that is what my instructor used.
    What I have now are various pages I've already created in flash that are different pages in my website, including a splash page with an enter button.
    For example, I want the enter button to link to another .swf or .html file when it is clicked. This file will be the main page.
    I tried using this script that my instructor mentioned in the video on the button layer:
    on (release); {
        getURL("page1.swf");
    the "page1.swf" file is already in the same folder in my computer as my splash page and I even imported it to the library of my splash page.
    From my instructor's video demo, that should be apparently all that is needed.
    But I cannot get this to work.
    I tested the file and this is what flash comes up with:
    In the output tab:
    ReferenceError: Error #1065: Variable TCMText is not defined.
    In the compiler errors tab:
    Scene 1, Layer 'Layer 28', Frame 1, Line 1
    1180: Call to a possibly undefined method on.
    Scene 1, Layer 'Layer 28', Frame 1, Line 1
    1120: Access of undefined property release.
    Scene 1, Layer 'Layer 28', Frame 1, Line 2
    1180: Call to a possibly undefined method getURL.
    Any thoughts? My instructor also recommended that I embed the .swf into an .html, but he obviously didn't tell us how to do that!
    Also, why doesn't script assist work with AS3?
    Thank you so much!

    Okay so I changed it to AS1/AS2.
    Now it says this:
    Scene=Scene 1, layer=Layer 28, frame=1, Line 1
    Mouse events are permitted only for button instances
    Scene=Scene 1, layer=Layer 28, frame=1, Line 4
    Syntax error.
    I am very confused.
    Also, since all my other pages are in AS3, is there some way I can use another script in AS3 that accomplishes the same task?
    Can someone please provide me with the correct script to use?
    Thank you so much! I feel that people here are much more responsive than my instructor is! Thank God for this forum!

  • How can I move from one hard rive to another to search for my photos?

    I have many of my photos on an external hardrive. iPhoto will not let me go to that external hardrive to search. It only shows the photos I have on my laptop. What is an easy way to do this?

    Don't know if I would call it "easy" but what you need to do is to create a new iPhoto library on your external drive.
    Hold down the option key when starting iPhoto.  You will get a dialog that will let you create a new library. (on you external drive)
    Now you can add photos to this library as usual.
    To switch between libraries hold down the option key when starting iPhoto and select which library you want.
    If your still confused you may want to post aditional questions on the iPhoto support section.

  • How do I switch from one column to another in a simple 3-column document?  Seems lame, but I can't find the answer in "help"...

    How do I switch from one column to the next, skip around?  Tab key doesn't seem to do itl.  I can't find any "help" in "help".  Help.  Please.  Thank you.

    Hi Karen,
    It is simple.
    Columns fill with text as the text becomes enough to spill over from the previous column. Below is an example. I have used a huge (6" botom margin setting to shorten the page to a reasonable length for a screen shot, and turned on Show layout and Show invisibles so the column boundaries and invisible characters can be seen. Here there's no text in column 3 as there is only enough text to fill column 1 and part of column 2.
    As more text is added, it eventually fills column 2 and flows into column 3:
    You can force the text into the next column by inserting a column break. Here, a column break has repalced the paragraph break in column 2 (after 'fascilisi."):
    Regards,
    Barry

  • How can I switch from auto_login wallet to password-protected encryption wallet in 12c  ?

    How can I switch from auto_login wallet to password-protected encryption wallet in 12c
    --Now the autologin wallet is in effect
    SQL> select * from v$encryption_wallet
      2  ;
    WRL_TYPE
    WRL_PARAMETER
    STATUS       WALLET_TYPE    WALLET_OR FULLY_BAC
        CON_ID
    FILE
    /acfs3/wallet
    OPEN       AUTOLOGIN    SINGLE    NO
      0
    --I need to export the keys and it informs me to use password-based keystore
    SQL> ADMINISTER KEY MANAGEMENT export KEYS with secret tde_1234 to '/home/oracle/dumpdir/orapdba.wallet' IDENTIFIED BY "tde_1234";
    ADMINISTER KEY MANAGEMENT export KEYS with secret tde_1234 to '/home/oracle/dumpdir/orapdba.wallet' IDENTIFIED BY "tde_1234"
    ERROR at line 1:
    ORA-28417: password-based keystore is not open
    --So I try to close the autologin keystore and open the password-based keystore, but the autologin keystore cannot be closed
    SQL>  administer key management set keystore close;
    administer key management set keystore close
    ERROR at line 1:
    ORA-28365: wallet is not open
    SQL> administer key management set keystore open identified by "tde_1234";
    administer key management set keystore open identified by "tde_1234"
    ERROR at line 1:
    ORA-28354: Encryption wallet, auto login wallet, or HSM is already open
    So My question is
    How to switch from auto_login keystore to password-protected keystore ?

    Remove the cwallet.sso file and check the wallet status in v$encryption_wallet.
    If it is not opened, try to open it with administer key statement.
    Check the status again.

  • The float in windows option is grey and not accessable ? How can I copy from one image to another ? Elements 11

    The float all in windows option is grey and not accessible ? How can I copy from one image to another ? Elements 11

    You really are not getting this.
    "I guess I am still completely shocked that as a parent we can't download something for everyone to use."
    Why do you continue to think this although we keep telling you that this is not the case.
    You do NOT have to purchase anything twice.  You can share the music with as many ipods as you like in your household.
    The ipods are designed to sync with your computer regularly.  You should have been syncing these other ipods with your computer all along, thus transferring the purchases to your computer where that music can be synced to as many ipods as you like.
    Take on of the ipods with the music in it.  Open itunes on your computer.  Plug in the ipod.  Do not sync.  Click File>Transfer Purchases  This will transfer the purchases from the ipod to the computer.  Make sure that you have authorized your account on the computer:  here are directions for that. http://support.apple.com/kb/HT1420
    Unplug the ipod.
    Plug in the other ipod with purchased music.  Do not sync.  Click File>Transfer Purchases  This will transfer purchases from the ipod to the computer.
    You can now plug in any of the ipods, select what you want to sync and sync.
    Have a look at the manual for the ipod.  http://manuals.info.apple.com/en_US/iPod_touch_iOS4_User_Guide.pdf

  • How to switch from  one Data base to another data base

    Hi,
    How to switch from one Data base to another data base if first data base server like in restoring,blocking,network disconnected state.
    Please help out for the same.
    Regards,
    Anilkumar

    Sounds like a problem for forums/support from the DB provider, as this problem is normally solved through some form of HA provided by the DB (or some cluster software, but still not Java) with, normally, a shared (virtual) IP address.

  • How to move Tablespace from One disk group to another disk group in RAC

    Hi All,
    I have 11gR2 RAC env on Linux.
    As ofnow I have problem with disk group. I have 3 disk group which is almost full - 98%. I have added one NEW disk group and want to move some of the Tablespace(TBS) from OLD disk group to NEW diskgroup and make some free space in OLD disk group.
    Can any one suggest me how to move TBS from one disk group to another disk grup without shutting down the instance.
    DB is in Noarchive mode.
    Thanks...

    user12039625 wrote:
    Hi Helios,
    Thanks for doc id but I am looking for noarchive mode solution. becaues I got ORA-
    "ORA-01145: offline immediate disallowed unless media recovery enabled " when run alter database datafile '...' offline.
    Hence I am trying something and findout below steps but not sure how useful it is:
    1- put tablespace offine
    2- Copy the file to new diskgroup using Either RMAN or DBMS_FILE_TRANSFER.
    3- Rename the file to point to new location.
    4- Recover the file.
    5- Bring the file online.
    I had move 240M TBS from OLE to NEW.
    These steps run successfully so I think this is valid for noarchive mode.Hence want to confirm..so inform me please.
    Thanks :)I have doubt in my mind:
    1. You database is in noarchivelog mode
    2. You're taking tablespace offline
    3. Suppose you're moving a file of size 10GB(or any larger filesize) to another disk group
    4. Now after moving the file, you're trying to bring the tablespace online............NOW
    tablespace will need recovery. if the required data is inside the SGA then it is ok. But if the data has been flushed, then?
    if step 2 and 3 has taken significant time, then most probably you'll not be able to bring that tablespace online.
    Regards,
    S.K.

  • How to pass data from one internal session to another internal session

    hi all sap experts ,
    How to pass data from one internal session to another internal session and from oneExternal session to another external session.
    Except : Import and Export parameters and SPA/GPA parameters.
    Tell me the otherWay to pass data ..
    Plz
    Thanks in advance

    hi,
      abap memory management u will understand about this concept.
    the import /export parameter will help u that passing data between two internal sessions by using abap memory.
      for syntax
    Passing Data Between Programs
    There are two ways of passing data to a called program:
    Passing Data Using Internal Memory Areas
    There are two cross-program memory areas to which ABAP programs have access (refer to the diagram in Memory Structures of an ABAP Program) that you can use to pass data between programs.
    SAP Memory
    SAP memory is a memory area to which all main sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters can be set either for a particular user or for a particular program using the SET PARAMETER statement. Other ABAP programs can then retrieve the set parameters using the GET PARAMETER statement. The most frequent use of SPA/GPA parameters is to fill input fields on screens (see below).
    ABAP Memory
    ABAP memory is a memory area that all ABAP programs within the same internal session can access using the EXPORT and IMPORT statements. Data within this area remains intact during a whole sequence of program calls. To pass data to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse. For further information, refer to Data Clusters in ABAP Memory.
    Filling Input Fields on an Initial Screen
    Most programs that you call from other programs have their own initial screen that the user must fill with values. For an executable program, this is normally the selection screen. The SUBMIT statement has a series of additions that you can use to fill the input fields of the called program:
    Filling the Selection Screen of a Called Program
    You cannot fill the input fields of a screen using additions in the calling statement. Instead, you can use SPA/GPA parameters. For further information, refer to Filling an Initial Screen Using SPA/GPA Parameters.
    Message was edited by:
            sunil kumar
    Message was edited by:
            sunil kumar

  • How to pass data from one internal session to another

    Hi SAP Experts,
    How to pass data from one internal session to another and from One external session to another external session. I used import and export parmeter and SPA/GPA parameters. What is the other way to pass data?
    Please tel me urgently
    Thank you
    Basu

    Memory Structures of an ABAP Program
    In the Overview of the R/3 Basis System you have seen that each user can open up to six R/3 windows in a single SAPgui session. Each of these windows corresponds to a session on the application server with its own area of shared memory.
    The first application program that you start in a session opens an internal session within the main session. The internal session has a memory area that contains the ABAP program and its associated data. When the program calls external routines (methods, subroutines or function modules) their main program and working data are also loaded into the memory area of the internal session.
    Only one internal session is ever active. If the active application program calls a further application program, the system opens another internal session. Here, there are two possible cases: If the second program does not return control to the calling program when it has finished running, the called program replaces the calling program in the internal session. The contents of the memory of the calling program are deleted. If the second program does return control to the calling program when it has finished running, the session of the called program is not deleted. Instead, it becomes inactive, and its memory contents are placed on a stack.
    The memory area of each session contains an area called ABAP memory. ABAP memory is available to all internal sessions. ABAP programs can use the EXPORT and IMPORT statements to access it. Data within this area remains intact during a whole sequence of program calls. To pass data to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse.
    All ABAP programs can also access the SAP memory. This is a memory area to which all sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters are often used to preassign values to input fields. You can set them individually for users, or globally according to the flow of an application program. SAP memory is the only connection between the different sessions within a SAPgui.
    The following diagram shows how an application program accesses the different areas within shared memory:
    In the diagram, an ABAP program is active in the second internal session of the first main session. It can access the memory of its own internal session, ABAP memory and SAP memory. The program in the first internal session has called the program which is currently active, and its own data is currently inactive on the stack. If the program currently active calls another program but will itself carry on once that program has finished running, the new program will be activated in a third internal session.
    Data Clusters in ABAP Memory
    You can store data clusters in ABAP memory. ABAP memory is a memory area within the internal session (roll area) of an ABAP program and any other program called from it using CALL TRANSACTION or SUBMIT.
    ABAP memory is independent of the ABAP program or program module from which it was generated. In other words, an object saved in ABAP memory can be read from any other ABAP program in the same call chain. ABAP memory is not the same as the cross-transaction global SAP memory. For further information, refer to Passing Data Between Programs.
    This allows you to pass data from one module to another over several levels of the program hierarchy. For example, you can pass data
    From an executable program (report) to another executable program called using SUBMIT.
    From a transaction to an executable program (report).
    Between dialog modules.
    From a program to a function module.
    and so on.
    The contents of the memory are released when you leave the transaction.
    To save data objects in ABAP memory, use the statement EXPORT TO MEMORY.
    Saving Data Objects in Memory
    To read data objects from memory, use the statement IMPORT FROM MEMORY.
    Reading Data Objects from Memory
    To delete data clusters from memory, use the statement FREE MEMORY.
    Deleting Data Clusters from Memory
    please read this which provide more idea about memory
    Message was edited by:
            sunil kumar

  • Is there a way I can move movies from one itunes library to another on the same computer?

    Is there a way I can move movies from one itunes library to another on the same computer?

    Locate them in the Windows Explorer, move or copy those files as you would any other, and drag them into the open iTunes window when the second library is loaded. If you're using two iTunes libraries on one user account, you only need to locate the files; otherwise, they need to be put in a shared area.
    (63747)

  • How to scan data from one internal table to another

    Hi All,
    let me know how to scan all from one internal table to another internal table. Pls provide me the syntax and code.
    i am very thankful to you all in advance.
    Thanks & Regards,
    Nagarjuna.

    if u want to copy data from itab1 to itab2  then use
    itab2[] = itab1[].
    if u want to compare whether both itab1 and itab2 are same or not,use
    if itab1[] = itab2[].
    *--same
    else.
    *--not same
    endif.
    if u want to compare itabs based on primary key....
    loop at itab1.
    read table itab2 with key f1 = itab1-f1.
    if sy-subrc <> 0.
    *--not same....
    endif.
    endloop.
    if u want to copy only few lines(say from 1 to 3) of itab1 to itab2 then use...
    append lines of itab1 from 1 to 3 to itab2.
    if internal tables don't have same structure,
    say only fields f1 and f2 are common,then
    loop at itab1.
    itab2-f1 = itab1-f1.
    itab2-f2 = itab1-f2.
    append itab2.
    clear itab2.
    endloop.
    if there are many common fields then...
    loop at itab1.
    move-corresponding itab1 to itab2.
    append itab2.
    clear itab2.
    endloop.
    Please don't forget to reward points....!!!
    Regards
    vasu

Maybe you are looking for

  • Guest Access Certificates with Multiple Controllers

    So I have an interesting scenario to run by the group, I haven't done this but was wondering if anyone else had tried it. Scenario: is 5 WLC's running 6.0.188.0, One guest SSID, and One H-REAP guest SSID. WLC#1: SNMP Name is WLC01, Virtual Interface

  • Xsl and rtf

    hi all, is it possible to call an rtf in an xsl? i have an rtf that contains static content and i want it displayed as the last page in my XSL-FO file.. is this possible? thanks allen

  • TS3276 Mail is working very slow

    I have mac osx 10.8.4 Mail is working very slowly, I have to wait a lot to see what I have written. Any help?

  • [Solved]Install: Sabretooth 990FX, ZFS & dm-crypt as root. UEFI probs?

    This is my first install using UEFI, so I'm not exactly sure what to expect, but I can gather that this isn't it. The "Installing Archlinux on ZFS" page: https://wiki.archlinux.org/index.php/In - nux_on_ZFS suggests using rEFInd as the bootloader, bu

  • Help! CS2 Ai, Psd, ImageR and InD crash on open.

    I have been happily running Creative Suite 2 Premium on my iMac Intel Dual Core with OS 10.4.11.for 18 months. Suddenly each of the major apps crashes on open with dialogue: EXC_BAD_ACCESS (0x0001) KERN_PROTECTION_FAILURE (0x0002) at 0x00000000 I Hav