HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
The SIM works on a different phone I tested it.
Any ideas?? TKS Sandro

“Could Not Activate EDGE” error message Update ...
Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
Thanks
Joe

Similar Messages

  • When I attempt to purchase a song from itunes, I keep getting the following error message: Could not purchase "song name". An unknown error occurred (-42408). There was an error in the itunes store. Please try again later

    When I attempt to purchase a song from itunes, I keep getting the following error message: Could not purchase "song name". An unknown error occurred (-42408). There was an error in the itunes store. Please try again later
    Can anyone help solve this problem?

    I've done a search on here and haven't found any solutions posted for it for windows computers. You could try posting in the iTunes For Windows forum and see if you get any suggestions in there (are you able to download other items from the store e.g. a free app ?) - I use a Mac, the only things that I could think of to suggest trying is see if you get the same error on a different iTunes library :
    creating and/or opening a different iTunes library : http://support.apple.com/kb/HT1589
    or using a different user account on your computer in case it's a problem with that user account.
    But you may want to try the iTunes For Windows forum first, apart from anything else you are likely to get better help for the above

  • I am trying to order a book, I keep getting the same error message," A network error occurred while processing your order, please check your network connection and try again"

    I am trying to order a book with iphoto, I keep getting the same error message.
    " A network error occurred while processing your order, please check your network connection and try again"
    I get the billing part up, it has even uploaded my jpegs but at the final process, I get the same message.
    I have ordered two books a few months ago without any problems.
    Now I keep getting the same message either half way into
    the order or at the final hurdle after the images have been uploaded.
    Any ideas?
    My shared Network has been fine and that does'nt seem an issue.
    Help.

    Try again in a couple of hours - sometimes it is a temp condition
    LN

  • I keep getting download error and it does not want to download.  I tried deleting anything that might have creative suite links and reloading but I keep getting the same error message.

    I keep getting download error and it does not want to download.  I tried deleting anything that might have creative suite links and reloading but I keep getting the same error message.

    Well... what IS the error message?
    Please read https://forums.adobe.com/thread/1499014
    -try some steps such as changing browsers and turning off your firewall
    -also flush your browser cache so you are starting with a fresh browser
    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
    http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three time and I keep getting the same error message.

    On my PC, I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three times and I keep getting the same error message. I have had itunes for years, but up until 2 months ago the quick time will not initialize to run it.

    Try using the Windows Installer Cleanup Utility and delete the iTunes installer. Then try installing iTunes again
    http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html

  • I am trying to load iTunes and keep getting a error 126 and reinstall program.  I have uninstalled and reinstalled twice and keep getting the same error message.  How can this be resolved.

    I am trying to load iTunes and keep getting a error 126 and reinstall program.  I have uninstalled and reinstalled twice and keep getting the same error message.  How can this be resolved?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."

    Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."

    Medops20 please see Install rollback and Shared Technologies | Windows for information on how to resolve the current error.

  • I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn't support this base station. Go to AirPort Service and Support for more information."

    I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Any thoughts?

    This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
    To check and see if  that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
    Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
    You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express.

  • TS1717 I can't open Itunes, I have an error that says says MSVCR80.dll is not found. I have tried twice to uninstall and reinstall but keep getting the same error message. Can anyone help?

    I can't open ITunes, I have an error message that says MSVCR80.dll is not found. Is anyone able to help solve this issue for me. I have tried to unistall and reinstall ITunes twice but continue to get the same error message.

    A msi file is short for microsoft installer.  It normally is for installation, removal, and maintenance for a program. So iTunes.msi would be used for the updating of the program.  For some reason it isnt finding this so we can't update, install, or remove it.
    From what I have seen windows installer cleanup utility solved related problems before. 
    I found this forum about removing and installing a new iTunes.  It was about someone who was trying to isntall iTunes, and was looking for msi file and asked for help.   Using this should allow you to be able to install iTunes.  It won't give you the msi file but will allow you to isntall iTunes over again.
    This was what was said.
    Another option in case you can't get an msi. (Or even if you can ... the msi's mentioned in the messages may be damaged rather than missing.)
    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
    After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
    Restart the PC, and try another iTunes install. Does it go through properly this time?

  • Firefox suddenly quit working and I get the following error message: Could not initialize the application's security component. The most

    Error message: Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write
    restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application
    behaviour when accessing security features.

    See:
    *https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

  • I upgraded my iphone 4s to the iphone 6 , and when trying to restore my settings from icloud, I keep getting the same error message, "unable to connect to icloud". it's been this way for 5 days! How do i fix this?

    I upgraded my old iphone 4s to an iPhone 6+ last Sunday (12/28). I've been trying to restore my settings and whatnot thru the icloud restore, and have been unsuccessful. The Wi-Fi connection isn't the problem, I'm not sure what is. The error message I keep getting is: "couldn't connect to icloud", it's been 5 days!! How do I fix this?

    Hi I would Restore New iPhone back to Factory Settings After Restore use same Apple ID & you will get all your Apps &Data back. This will get rid of any bugs. Cheers Brian

  • I installed Office:mac 2011 on my new iMac running 10.8.3 and discovoed my file transfer from my old macbook installed Office:mac 2088. Now I have both installed and none of the office apps work - I keep getting the same error message

    I recently purchased an iMac to replace my 2008 macbook.
    I used migration assitant to transfer all of my macbook files to the iMac. I noticed that I had the old 2008 version of Office:mac 2008 on the iMac and decided to install Office:mac 2011 which installed successfully.
    However, now I can't open excel or word or powwerpoint now using either 2008 or 2011.... I just get an error message saying there was an error and the app had to close. It offers to send a report to Microsoft.
    I tried moving Office:mac 2008 to trash but this didn't resolve the issue.
    Can anyone help (I am not a really sohpisticated user so be gentle)
    Thanks Dave

    Hello Dave,
    This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office in any way. I suggest you post Office related questions on Microsoft's own forums for their Mac products.
    http://www.officeformac.com/productforums

  • After several attempts to download Illustrator CC I keep getting the same error message about Error Loading plugins

    I have run out of ideas.

    Mojorocker64 what error messages are you receiving during the installation process for Illustrator CC?  For details on how to locate and interpret the installation log files please see Creative Cloud Help / Troubleshoot install issues with log files | CC.  You are welcome to post any specific errors which you discover.

  • I updated my iPhone with iOS 6 but I can't access passport . I keep getting the same error message. Can't connect to the iTune store.

    I recently updated to ions 6 but I can access passport due to error message can't connect to iTune store

    Have a look at the articles mentioned  here:http://support.apple.com/kb/TS3694
    Unknown Error containing "0xE" when restoring: To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.

  • I keep getting the same error message from windows, "iTunes has stopped working and the program will be closed". I have just recently installed iTunes on my external hard drive and everything looked great until the program crash! Any suggestions?

    Here is a copy of the windows vista error report.
    Product
    iTunes
    Problem
    Stopped working
    Date
    4/19/2014 9:38 PM
    Status
    Report Sent
    Problem signature
    Problem Event Name:      APPCRASH
    Application Name:           iTunes.exe
    Application Version:         11.1.5.5
    Application Timestamp:   53073d6a
    Fault Module Name:        ntdll.dll
    Fault Module Version:      6.0.6000.16386
    Fault Module Timestamp:                4549bdc9
    Exception Code:                c0000005
    Exception Offset:              00062086
    OS Version:        6.0.6000.2.0.0.768.3
    Locale ID:           1033
    Additional Information 1:                8d13
    Additional Information 2:                cdca9b1d21d12b77d84f02df48e34311
    Additional Information 3:                8d13
    Additional Information 4:                cdca9b1d21d12b77d84f02df48e34311
    Extra information about the problem
    Bucket ID:          95851104
    I would appreciate any suggestions or ideas of where else to look for advice. Thanks!

    Hey jcaqualung,
    Thanks for the question. I understand that you are experiencing issues with iTunes on your Windows Vista machine. The following resource may provide a solution. I would also recommend installing iTunes on the internal hard drive of your computer, as opposed to the external drive.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Thanks,
    Matt M.

Maybe you are looking for

  • HP office jet 8600 model N911g

    My wife purchased new, first installed  2014-02-26.  OS win XP Pro, wireless ok. Printer working fine untill wife did not remove set up cartridges after installation completed. Printer was working w/set up catridges untill black ink ran low and was r

  • WorkFlow get triggered even if we set trigger for item update with SPEmailEventReceiver and workflow attached to same Library

    Hi All,            I have a situation, SPEmailEventReceiver and WorkFlow is attached to same library, WorkFlow is configured to run after item is updated, but soon as the email is received in library the workflow is getting triggered, We have a actio

  • Visual admin

    Hi all, I have to check JNDI Service in visual admin. how to check the JNDI Service which shows the node localejbs/SAP XI JMS Adapter/ConvertMessageToBinary in the JNDI lookup tree. My JMS adapter having problem in connecting to MQ system. Can anyone

  • Chat applet not initialized???

    OS X on iMac...try to log in yahoo Chat but I get an error message " applet not initialized " I check every HELP suggestion but none will do nor does it properly address the issue. How does one initialize applet? Some say uninstall Java then re-insta

  • How do I find out the firmware version of my WD Black2?

    Dumb question, maybe. How can I find out what firmware version I'm currently on? Need to know this to figure out if I need to update. Thanks