HT201343 I have a mid 2011 iMac and i do not see a AirPlay option on my device. Why?

I have a mid 2011 iMac and i do not see a AirPlay option on my device. Why?

Hi Fid
Your mac is fine but you need OS X 10.8 Mountain Lion or newer and your profile says you have OS X 10.7.5 Lion.  You need to get ML as a purchase from the app store as mirror is a new feature with that OS.
The alternative is a third party app called airparrot.
Jules

Similar Messages

  • HT201457 I have a mid 2011 iMac and have installed windows 8.1 on it  I costantly get system thread not handled and kernel security check failure and the Mac restarts

    I Have a mid 2011 iMac with windows 8.1 on it and constantly get system thread exception not handled and kernel security check failur

    I Have a mid 2011 iMac with windows 8.1 on it and constantly get system thread exception not handled and kernel security check failur

  • HT204291 Hi, I have a I phone 5 and I do not see the airplay icon in settings?

    Hi I cannot find my airplay icon and I have reset my router, iphone and apple tv.  I went into settings in my phone and I dont see it there.

    Did you follow ALL of the suggestions in the support article that led you here?
    Whatever Youtube video you watched, if it showed an AirPlay icon other than what's on the Control Panel, it's obsolete and doesn't pertain to iOS 7/

  • I have a 27in mid 2011 iMac and a 2006 mac mini

    i have a 27in mid 2011 iMac and i have been given a 2006 mac mini i have no screen to see whats going on on the mini and there is no os onboard how do i get OS X on to the mini so i can get to use this with a tv with hdmi i have the mini dvi to vga connector and a vga to hdmi lead into a samsung 32in led tv, tv keeps saying not connected???

    - You said "Apple dvi to via converter with a via to hdmi cable . What is a "via"? I think you mean VGA.
    Just what VGA to HDMI cable to you have?  VGA is analogue while HDMI is digital. The Mini DVi out is both analogue and digital (DVI-AD). You would need a converter to convert the analogue VGA to digital.
    - Yes, when you boot up you should get a chime if the Mac is functional. The chime The sound indicates that diagnostic tests run immediately at startup have found no hardware or fundamental software problems.[1]
    http://en.wikipedia.org/wiki/Macintosh_startup
    Thus it appears the Mini also has a hardware problem.
    Make an appointment at the Genius Bar of an Apple store. It is free.
      Apple Retail Store - Genius Bar

  • I have a mid-2011 iMac running Mavericks. When I click restart the computer goes to a white screen with a spinning circle and does not go any further until I hold down the power button to turn it off. What do I do?

    I have a mid-2011 iMac running Mavericks. When I click restart the computer goes to a white screen with a spinning circle and does not go any further until I hold down the power button to turn it off. What do I do?

    Ok, sounds like the safe mode boot worked... You probably don't want to always be in safe mode though (some reduced functionality) so does it do a normal boot now? If not, you should then reboot into safe mode and run Disk Utility. Then select Macintosh HD on the left hand side, and click the Verify Disk button. If needed, it will ask you to Repair Disk. If there are errors found, Repair Disk again until there are none. Then try another normal boot and reply with result, wether good or bad.

  • I have an 21.5 Mid 2011 iMac and i want to upgrade my RAM.  Currently I have two 2GB and two free slots.  Do I have to put in two 2GB in the free slots or can I use two 4GB or 8GB?

    I have an 21.5 Mid 2011 iMac and I want to upgrade my RAM.  Currently I have two 2GB and two free slots.  Do I have to put in two 2GB in the free slots or can I use two 4GB or 8GB?

    You can leave the existing RAM in their current slots and add compatible modules in the empty slots. For best performance, add two of teh same size. Our 2010 iMac 21" shipped with 4GB RAM---two 2GB modules in two of the four slots. I added two 2GB modules to the empty slots and now have 8 GB RAM.
    Be sure to order RAM from a trusted Mac-savvy RAM vendor. Some vendors thing a Mac is a hamburger. For over a decade I've bought all our Mac RAM (and we have 18 Macs in teh family!) from one vendor:
    http://eshop.macsales.com/shop/memory/iMac/2011/DDR3_21.5_27
    The link is to the proper RAM for your Mac.
    Crucial.com is also a trusted vendor.

  • Where did 30GB of unused space on my SSD main drive go?  I have a mid 2011 iMac that until yesterday had just 54GB of space occupied on the primary drive.  I imported 45 minutes of video from an SD card.  Could that have used up the space?

    Where did 30GB of unused space on my SSD main drive go?  I have a mid 2011 iMac that until yesterday had just 54GB of space occupied on the primary drive.  I imported 45 minutes of video from an SD card.  Could that have used up the space?

    I added an SSD to my 27" 2011 iMac.  Although Sahidus is absolutely correct, it is much easier to add an SSD replacing the optical drive, it wasn't that bad to add it using an entirely seperate cable using SATA-III.  To me it is worth the extra hassle to install a SATA-III SSD.  This is where you are going to get maximum performance.
    Although it appears complicated, if you go slow, the procedure to install an SSD drive isn't too bad.  It takes at most 3 hours, as long as you are prepared and have all the parts and tools.
    http://www.btobey.com/learn/imac-ssd-install.php
    This describes how I did it.  Now I get awesome data performance from my iMac!
    I think the 21.5" may be more difficult to find where to place the SSD.  But im sure it is possible.  Just be creative.

  • I have a mid-2010 iMac and just purchased a 2TB TC, can't join existing wireless network with AC standard so attached to iMac via ethernet with TC wifi turned off.  How do i access TC now? not showing up in disk utility or on desktop. working fine with TM

    I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off.  How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM.  My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore.  Connected those drives to TM via firewire and could see the drives and access them.
    Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed.  I heard that bridging slows down everything and then there can be port issues with mail etc.  I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads.  Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system.  I really didn't want to monkey around too much with my system.  But are there other options to connect the new TC.  Can't find info anywhere for this and called apple who gave me the info above.  after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light  or repair it in disk utility if it should become corrupted.
    For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working.  Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
    Now a rant.  I can't believe in this wireless age that Apple would make a product that cant join a wireless net work.  The apple rep said i could return it and look for the previous TC that would join an existing wireless network.  Are we going backwards?
    Thanks!
    lennydas

    Ok... it is getting a bit clearer but there are still some questions.
    I connect to the internet via airport only and it is pretty fast.
    I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
    Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed.  I heard that bridging slows down everything and then there can be port issues with mail etc.
    I think this is mistaken.
    Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
    If the computer is close it will be faster than the FIOS.
    You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
    I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC.  the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
    Thanks again!
    You cannot extend to a non-apple wireless router.
    You cannot use join a wireless network because when you do the ethernet ports will be cut off.
    But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
    Join in the express is the only apple router that still allows an ethernet connection.
    For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options.

  • I have a mid 2007 iMac and want to know if i can upgrade to OS X Mavericks?

    I have a mid 2007 iMac and want to know if i can upgrade to OS X Mavericks?

    Just adding a point to Paul's suggestion of suppliers.  (Congrats on getting to 5 figures, Paul)
    In North America contact OWC …        Upgrade Apple iMac Memory
    In Europe contact Crucial.com  …       RAM Memory Upgrade
    Both companies have facilities to guide you and will recommend the correct memory package to meet whatever needs you describe to them.  
    There may be benefits buying from your own geographical location insofar as Shipping charges, Local sales taxes and Exchange rates.  Check out the basic memory costs and do your sums.

  • On my previous macbook when using an input device, i.e. external memory or CD etc. an icon would appear on the desktop,have recently bout an imac and this does not happen, wondering if there is a way to put input devices to appear on the desktop?

    on my previous macbook when using an input device, i.e. external memory or CD etc. an icon would appear on the desktop,have recently bout an imac and this does not happen, wondering if there is a way to put input devices to appear on the desktop?

    Hello, check Finder Preferences>General, & then the Sidebar tab also.

  • I have a new (mid) 2011 imac and want to transfer my old records to itunes but i dont know what usb turntable would be best for a new mac that would have compatible software for ripping to itunes?

    i have a mid 2011 i5 imac and i want to transfer my vinyl records to itunes but i dont know what usb turntable would be best for my imac that has compatible software for transfer to itunes

    Hallo,
    I use an Akai usb turntable with the Audacity sw delivered with it. To monitor during recording I also use the LineIn utility (all this on a Macbook Pro with Mavericks).
    It works fine, only the input volume of the usb audio port cannot be adjusted (at least I did not yet discover how to do it) and the volume of the music is lower than other music imported into iTunes from CD or iTunes store, but still acceptable.
    Success, Jean

  • HT1522 I have a mid 2011 iMac running Lion, and the remote seems not to work at all!

    Have been trying to pair my Apple Remote with my mid 2011 imac.
    Nothing doing, although if I go and try same remote with an older macbook, it works fine.Battery all fine too, have been checking via digital camera. Something on my iMac is preventing this remote form being seen (and yes I have disabled ir receiving on the laptom after testing it)
    any ideas?
    thanks for your time!!

    Ok, sounds like the safe mode boot worked... You probably don't want to always be in safe mode though (some reduced functionality) so does it do a normal boot now? If not, you should then reboot into safe mode and run Disk Utility. Then select Macintosh HD on the left hand side, and click the Verify Disk button. If needed, it will ask you to Repair Disk. If there are errors found, Repair Disk again until there are none. Then try another normal boot and reply with result, wether good or bad.

  • Mid-2011 imac and original apogee duet. . .no likey each other?

    So I recently got a mid-2011 Imac with Mountain Lion.   Years ago I got an Apogee duet, a mac-specific firewire (400)-based audio interface for audio recording.    I'd been using it with my 2008 imac just fine.  When I hooked it up to this new one (today was the first time), I discovered that at reasonable input recording levels, I was getting some very nasty static-y/interference sounding mess.   It's got to be the imac/apogee combo because I had all the audio stuff turned off and unplugged. I was simply monitoring the input signal via Adobe Audition.     If you think it was noisy BECAUSE nothing was plugged in, it was just as noisy with a Sennheiser G2 wireless lav hooked up.      I have tried going directly from the duet to the computer with a firewire 400 to 800 cable.  I have the newest update for the Apogee/Maestro software for Mountain Lion.    Anyone have experience with this stuff?  Thanks.

    Hello,
    Long shot, but...
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

  • I have a mid 2007 iMac and the internal superdrive audio cd won't play, the DVD works. Can I purchase an external cd drive that will work with my iMac?

    I have a mid 2007 iMac (Model A1224 iMac 7,1) and the internal superdrive audio cd won't play, the DVD works. Can I purchase an external cd drive that will work with my iMac?

    Welcome to the Apple Support Communities
    Any external optical drive will work with your Mac. If you want an Apple USB SuperDrive, see > http://www.tuaw.com/2012/04/02/use-the-macbook-air-superdrive-with-any-almost-ma c/
    The best option is to take the Mac to an Apple Store and get the Mac's SuperDrive repaired

  • My MBA(mid 2011) Airdrop icon missing&can not see my iPad(iOS 8.0.2). What wrong ?

    My MBA(mid 2011) Airdrop icon missing and can not see my iPad Mini Retina (iOS 8.0.2). What wrong ?
    MBA and iPad is on same wifi network.

    I have same problem. 3 iPads in the house + iMac. Airdrop works just fine except on mine. Mine simply doesn't show Airdrop anywhere. Tried every suggestion on the boards....but I don't even see an Airdrop icon....not on control panel, not under general - restrictions...nowhere.

Maybe you are looking for

  • Error while loading AS400 table

    Posted: 14 May 2014 08:11 Post subject: Error while loading AS400 table Hi, I was trying to load an AS400 table using a flat file as source. The table and flat file has a single field only. I'm getting the error "<SQLExecute>: <[IBM][System i Access

  • Problem with Thomson router?

    Hello, I use a Thomson 585 v8 router. It works fine, UNTIL I connect to it my mac book pro (running 10.9.2). Then, ALL other devises (iPad, mac mini, all windows devises) drop the connection!! I tried everything. Any further ideas to try?? Thanks, Ta

  • Nano wont play video out?

    when i play a movie and plug it to my tv using the apple cables it plays black and white and its like double on the tv screen i only have yellow red white on my tv i have no othere place for the blue and green but my othere tv thats hooked up to the

  • Streaming over WiFi is not fluent

    When I stream video from my mac or iPad over wifi, video is not fluent, it is stucking. When I stream it from my mac over ethernet (apple tv is connected to my network by ethernet), it works just fine. These problems started after updating my Apple T

  • Consistent vertical space between elements in page layout--Pages 09

    Hello, Is there a way to maintain a consistent amount of vertical distance between elements in the Pages 09 layout view? Thanks, ~A