HT201412 I have tried restoring with i Tunes and ipad still wont turn on
I have tried restoring my ipad with i Tunes and the ipad still will not turn on
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom
Similar Messages
-
my phone will not pick up network, i have tried restoring on i-tunes and it comes up with error message -1
Here's what that error means:
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
This comes from this article:
http://support.apple.com/kb/TS3694#error1 -
Hi i have just tried to update i tunes and it has crashed and uninstalled i tunes off my laptop. I have tried to install i tunes again but it wont and comes up with error messages
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2
Message was edited by: turingtest2 -
I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Since updating my iPhone 4s to ISo 6 my wifi setting is a pale grey and can not be turned on. Have tried restore, reset network settings and updated to ISP 6.0.1, anyone have any suggestions as this is really frustrating.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
i bought an iphone 5 put a passcode i forgot it done a restore with i tunes and it is still asking for user id and password during activate how do i get around that ??
You need to contact the previous owner and have them follow these instructions: http://support.apple.com/kb/HT5661
-
Ipod classic has been wiped saying 'no music'etc.
Cannot see it on the 'device list' in my itunes. I have tried restoring to factory settings and reloading...it reloads some of the music, but when I plug the Ipod back in, it wipes it again. Ocassionally Itunes freezes when I plug in the Ipod.Make sure your headphones are plugged in all the way, meaning you cannot see any of the silver still showing from the headphone's plug.
A feature of the Nano is to put it to sleep when the display goes out and it does not detect any headphones.
B-rock -
Iphoto I have tried opening with cnt alt and updating library what next cant open
iphoto I have tried opening with cnt alt and updating library what next cant open?
julieThis is the iPad forum. If you are having an iPhoto problem please post here:
https://discussions.apple.com/community/ilife/iphoto
If your problem involves iPhoto and an iPad please provide additional information. -
I have just installed iTunes for the first time. When I run the application I get a "iTunes not working" message. Operating system Vista (32 bit). I have tried reinstalling with all firewalls off, but still no success. Have other people had this problem?
Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer. -
my i pod is still on a white screen after restoring with the two buttons and also restoring on i tunes and it still has a white screen
I've been struggling with mine all morning with the same issue.
Mine would not wake up from sleep (will just white screen).
It will boot using a hard reset (i.e. the power button and volume down button being held down for 8 or so secs). I restored and synced it multiple times but it still has a problem waking up and just just goes to white screen.
I saw a post suggesting a loose connection which I had my doubts about (as it will wake with hard reset) - bit BINGO! If I wake mine (with index finger) whilst applying pressure to the top of the screen area (with my thumbs) it will wake up. When I become frustrated enough I'll take it apart and see if something has become loose.
Hope this helps. -
My ipod jumps from one screen / app to another on it's own. Sometimes I can't unlock or even shut off. I've tried the reset, I've tried back up, even tried restoring to factory settings and is still having problem. Any ideas of what I can do.
When you still have the problem after restoring to factory defaults/new iPod then you very likely have a hardware problem and an appointment a th Genius Bar of an Apple store is in order.
-
So my ipod 5 wont charge nor turn on and whenever i plug it with thee charger all it shows is the low battery sign with the lighting bolt under it and i left it like that but like the title says its been like that for 2 days straight and it still wont turn on nor charge. I dont know what to do. It won't be able to reset or respond to any of my actions. i tried the DFU mode but it wont work unless its on. PLEASE HELP!
Sounds like the battery is dead. Take it to Apple and ask them to check it out for you.
Allan -
Firefox will not open at all. I tried to remove it from the programs to try to reinstall it but it wont let me remove it. So I tried to download again anyways and ff still wont open. My email is alicia@****
Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
If necessary then also see:
* http://kb.mozillazine.org/Browser_will_not_start_up
* http://kb.mozillazine.org/Error_loading_websites -
New Ipod was accidentally locked with an unknown passcode - have tried restore process in I Tunes but still cannot unlock passcode - any suggestions?
You'll need to put it in dfu recovery mode, then do a restore. That will set it back to it's "out of the box" condition, without a password, then you can sync with iTunes...Here is an article that describes the process...
http://osxdaily.com/2011/01/16/forgot-iphone-passcode-how-to-reset/ -
HT201412 I have tried all of the above and still can't get my ipad to respond
I have tried all of the above and still can't get my ipad to respond
Everything? Did you see the very last part about restoring the iPad and did you notice that there is another link in that step in case you cannot restore the iPad?
Symptoms
Your iPhone, iPad, or iPod touch may occasionally stop responding to buttons, switches, or touchscreen input and may exhibit one or more of the symptoms listed below.
Resolution
If any of these symptoms occurs, follow the steps in this article to resolve the issue. The device:
Does not return to the Home screen after pressing the Home button
Does not wake from sleep after pressing the Sleep/Wake button
Does not turn on (or power on) when pressing any button
Appears frozen or unresponsive
Is unable to "Slide to Unlock" or "Slide to Power Off"
If a single application is not responding or freezes when it opens, you can force it to close
Press and hold the Sleep/Wake button until the red slider appears. When the red slider appears, release the Sleep/Wake button.
Instead of dragging the red slider, press and hold the Home button for six seconds.
If the device does not return to the Home screen, see the steps below to restart.
If the device is unresponsive or certain controls aren't working as expected, try restarting
To turn off the device, press and hold the Sleep/Wake button until the red slider appears.
Slide your finger across the slider to turn off the device.
To turn on the device, press and hold the Sleep/Wake button until the Apple logo appears.
If the device remains unresponsive or does not turn on (or power on), try resetting
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds.
If there is no video, verify that the device has enough charge to turn on
If you are using an iPad, ensure that it's connected to the 10W USB Power Adapter.
Let charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Home button to attempt to wake the device.
If the screen displays a red battery icon, let the device to continue to charge until it turns on.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane.
If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
Additional Information
Ensuring that your iOS device is kept updated to the latest software should minimize the occurrence of these issues.
Maybe you are looking for
-
How to append a ResultSet to another ResultSet?
Hi, How could I append a ResultSet to another ResultSet object if their columns are exactly the same? For example, I have some methods that return ResultSet objects for particular queries. int a = 3; ResultSet rs1 = getRoute(20, a); ResultSet rs2 = g
-
Macbook Pro Mid 2009 Processor 2.26 GHz Intel Core 2 Duo, Memory 2 GB 1067 MHz DDR3. iOS 10.10.1 (14B25). My mac is running slow and have ran EtreCheck. Please help me fix my mac. Thanks! Problem description: My mac has been very slow lately. Any sug
-
A question about updating metadata files in plug in
Hello I 'm trying to monitor my stand alone java app. I read the chaper Target Types and Default Collections ( my app exposes jmx beans) all seems to work ok ( i mean the part wherre it says .. emctl register oms metadata -service targetType -file fu
-
Microsoft BI Semantic Model for Power View is missing in data source
Microsoft BI Semantic Model for Power View is missing in data source type drop down when cretaing a rsds data source for powerview in sharepoint 2013
-
No Flash Video Playback on Mac Pro with Leopard
I recently purchased a Mac Pro with Leopard, Final Cut Studio 2, and Adobe Production Premium suite. I got everything setup yesterday, and I exported a Quicktime reference file from Final Cut, and brought it into Flash CS3 Media Encoder. The file see