HT201412 My iPhone will not respond even once it is hooked to iTunes nor will it respond when I hit the power (reset) button. The screen mentions that the system is checking for "borrowed blocks" (small writing in the top right corner).

My iPhone will not respond even once it is hooked to iTunes nor will it respond when I hit the power (reset) button. The screen mentions that the system is checking for "borrowed blocks" (small writing in the top right corner).

Are you using the charger and cable that came with the phone?
Are you using an unauthorized third party charger?

Similar Messages

  • HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    You are in Recovery Mode. Follow the instructions below to recover your iPad.
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • In the top right corner of my i phone screen there is a small padlock with a circle around it, what is this for and how do i get rid of it,, it has only just popped up

    in the top right corner of my iphone screen there is a small padlock with a circle around it, what is this for and how do i get rid of it, it has just popped up...

    That is the orientation lock indicator. It means that you phone will not go into landscape mode when tilted on it's side.
    To turn orientation lock off double tap the home button, to access the multitasking menu, then swipe your finger to the right over the multitasking bar at the bottom and touch the big button on the left with the padlock.

  • HT1386 I have iTunes (up to date) and an iPhone 4s. When I connect it using the USB cable it does not appear in the top right corner. Other devices do and also the cable is fine as it charges and the PC sees it as a device. I've looked online and have no

    I'm new to this and I think I typed a long heading!
    Anyway the issue is I have iTunes and just updated it to the latest. I also have various Apple devices however my iPhone won't sync with iTunes. When I connect it using the USB cable it does not appear in the top right corner as does other devices. The cable is fine as it charges and also my PC sees the device. However it does not appear in iTunes so I can't sync music to it.
    I've searched the web but all asume iTunes can see the device.
    Help!?

    Hi David,
    If you are having issues with your iPhone not being recognized by iTunes on your Windows machine, you may find the troubleshooting steps in the following article helpful:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    - Brenden

  • IMovie '11 - when I open iMovie the application starts, but there is no window, If i plug in my iPhone the window will appear from the top right corner, but disappear again. HELP!?

    iMovie '11 - when I open iMovie the application starts, but there is no window, If i plug in my iPhone the window will appear from the top right corner, but disappear again, even if i use a drop down menu from the top menu bar and select, say 'New Project', it will appear from the top right corner, let me choose a new project, only to disappear again into that same corner.

    Argh I'm having the same problem! I always use imovie, and haven't had this prob before... apprantly imovie 11 is full of bugs like this. Anyone know if theres any way of downgrading?

  • Firefox constantly freezes on the screen. firefox not responding warning appears on the top of left on the screen. The problem is occuring since last week. After restarting firefox, properly working untill the new prob. come

    Firefox constantly freezes on the screen. firefox not responding warning appears on the top of left on the screen. The problem is occuring since last week. After restarting firefox, properly working untill the new prob. comes.

    The default of the pref network.http.max-connections has been increased from 30 to 256 in Firefox 6+ versions.
    Try to decrease the value of the pref <b>network.http.max-connections</b> from 256 to 30 as used in Firefox 3 versions.
    *https://support.mozilla.com/kb/Firefox+never+finishes+loading+certain+websites
    See also:
    *http://blog.bonardo.net/2011/09/30/is-your-firefor-freezing-at-regular-intervals
    *Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

  • How can I get rid of the "E" signal on the top right corner of my iphone? It's suppose to say 3G.

    What does E means on the top right corner of my iphone?...how can I remove it & replace with 3G.

    EDGE is an earlier technogy for cell data that is still used. If you are in an area with no 3G available or a very weak signal it will switch to E. you can try Resetting your device by holding down the sleep and home buttons, ignoring the red Off slider, waiting for the Apple logo then let go of the buttons. If that does not work you will need to relocate to an area with a stronger signal.

  • Macbook air 2012 not displaying icon on the top right corner

    hi guys
    as the title, my macbook air isn't displaying icon on the top right corner. for instance, my volume icon and wifi icon disappear. furthermore, ocaasionally there some flashes on my screen. this never happen to me before and i am reinstalling my OS 10.8 right now. Anyone know what is wrong with my laptop?

    Hi Matze_Moto,
    It should not be an issue. What you are seeing is the ability to Mirror your display to an Apple TV. If you feel that there is an issue, click on the menu to see if it is actually connected to another display. Check out the article below for more information. 
    About AirPlay Mirroring in OS X
    http://support.apple.com/en-us/HT201343
    Take it easy,
    -Norm G. 

  • My 3gs vibrates when i push the top left corner of the iphone

    my 3gs vibrates when i push the top left corner of the iphone.

    Sounds like the mute switch is failing. Time to either get it replaced or start thinking about a new phone.

  • What does the lock with a circle around it mean in the top right corner of my iPhone 5c

    What does the lock with a circle around it mean in the top right corner of my iPhone 5c

    It means that your screen rotation is locked. Open up the control center by sliding your finger up from the very bottom of the screen, and click on the screen rotation lock symbol, which is the same symbol you see on the status bar.

  • Does a sports camera positioned beside the top right corner of iPhone4 cause interference to GPS?

    I rarely experience inaccurate tracking on Sports Tracker app though I did experience it the other day.
    Since buying my HRM2 (for iPhone 4) I no longer run the myriad other GPS tracking apps on my iPhone. However, while out on a ride I discovered ST was not tracking well, so decided to simultaneously run a couple of apps. Another also experienced tracking problems.
    I decided to remove the iPhone from the ST bike mount and put it in my back pack. The tracking issue resolved itself.
    I was operating a sports camera on my bike at the time. It was located right beside the top right corner of the iPhone. On another bike, the sports camera is positioned differently (forward and lower of the top left corner) and I have experienced no problems with tracking. Could it have been causing interference on this ride due to its position?

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • Images have ? symbol on the top right corner of the thumbnail  what does this mean and how do I remove it?

    Q - My images have a
    ? symbol on the top right corner of the thumbnail what does this mean and how do I remove it?
    A - The
    ? symbol is used to identify a file that Lightroom can no longer access; probably because it has been moved using OS drag/drop or Move command rather than Lightroom.
    Click the
    ? symbol will cause a small dialog will appear. This dialog will provide information as to where the file was originally located along with an option to find (Locate) it again.
    As you'll quickly realise, clicking the
    ? symbol is fine for finding individual files that may have been relocated, but not for large numbers. There must be a better way
    Look at the Folder panel (left side of Library module) and you should find that the folder/subfolder containing the files that Lightroom can no longer find are shown in Red text. It is the red text that Lightroom uses to help you identify a folder/subfolder that contains files that it has lost track off.
    On the Mac you should
    Ctrl-click (right-click when using two button mouse) the folder/subfolder, a pop-up menu will appear. From the pop-up menu choose the command
    Locate Missing Folder, a dialog should appear. The dialog gives you access to every hard disk connected to your computer or CD/DVDs if they're in the tray. Use this dialog to navigate to the location where the folder is now located, then select this folder (not the files). Finally, press the
    Choose button and allow Lightroom to do its stuff.
    The method described above also applies to the PC version although the dialog is called
    Browse for Folder and the
    Choose button is replaced by
    OK.
    You can avoid getting into a situation were Lightroom looses track of your folders/subfolders by using a variation of above.
    A tutorial demonstrating above can be found
    Here

    Q - My images have a
    ? symbol on the top right corner of the thumbnail what does this mean and how do I remove it?
    A - The
    ? symbol is used to identify a file that Lightroom can no longer access; probably because it has been moved using OS drag/drop or Move command rather than Lightroom.
    Click the
    ? symbol will cause a small dialog will appear. This dialog will provide information as to where the file was originally located along with an option to find (Locate) it again.
    As you'll quickly realise, clicking the
    ? symbol is fine for finding individual files that may have been relocated, but not for large numbers. There must be a better way
    Look at the Folder panel (left side of Library module) and you should find that the folder/subfolder containing the files that Lightroom can no longer find are shown in Red text. It is the red text that Lightroom uses to help you identify a folder/subfolder that contains files that it has lost track off.
    On the Mac you should
    Ctrl-click (right-click when using two button mouse) the folder/subfolder, a pop-up menu will appear. From the pop-up menu choose the command
    Locate Missing Folder, a dialog should appear. The dialog gives you access to every hard disk connected to your computer or CD/DVDs if they're in the tray. Use this dialog to navigate to the location where the folder is now located, then select this folder (not the files). Finally, press the
    Choose button and allow Lightroom to do its stuff.
    The method described above also applies to the PC version although the dialog is called
    Browse for Folder and the
    Choose button is replaced by
    OK.
    You can avoid getting into a situation were Lightroom looses track of your folders/subfolders by using a variation of above.
    A tutorial demonstrating above can be found
    Here

  • Images have ? symbol on the top right corner of the thumbnail

    Lightroom 2 crashed and now the RAW images I was processing have ? symbol on the top right corner of the thumbnail what does this mean and how do I remove it?
    The FAQ relating to this problem by Ian Lyons is dated - 03:39am Jun 9, 2007 Pacific refers to Lightroom and when I click on the ? no file or folder appears in red text.
    I am on a PC with XP Pro (Update pack #3)
    Any help in locating my files is greatly appreciated.
    Thank You,
    Hersul

    I've had these problems on my mac and pc.
    The ? mark appeared in the LR 2.0 Beta on some photos, and was still there in the latest Lr 2.0(bugga rather than beta). However LR found the photos and I was able to use the develop module to edit the photos.
    I am going to be really un helpful and say just ignore it and they WILL go away - to quote JL "its all fine in my system."
    The question marks have now gone. I tried the reboot, the delete plists and all the previews, I've rebooted, I compacted and relaunched the catalogs then went away for a couple of days leaving the mac on and LR running.
    into PC land.
    I frequently have missing thumbnails on my pc as well, this is usually after I have imported a chip full of photos and the pc has finished importing. Unlike my mac, the pc laptop does not tell me its finding / creating the previews.
    If I start to do other things straight after import, ie goto develop or scroll thru photos, I get the missing thumbnails and then LR2 hangs.
    It always looks good for clients when you say, hang on just gotta CTRL - ALT - DELETE and restart my expensive new program.
    I have found, as several people have commented, that being patient with lightroom does work. Allowing LR to background process the thumbnails, the previews and the like does seem to make things more smooth - ie all the ?'s gone in macland and no more blank thumbnails in pcland. Maybe Lightroom is just a sulky 4yr old that we have to feed, and wait for it to digest, then it is happy. It does seem like the database needs to process to work properly, Hey adobe, if this is the case, can we have a progress meter for this please.
    It seems that LR just needs to think about our photos... for a few days... i've only got 44,000 on my server so importing catalogs of the days work from the pc or chips does mean the "dreaded whirly umbrella of impatience" that spins when I select 3 photos or press Develop or bakc to Grid or Export or Stack or .... and it often spins for a long while.
    So the ? on thumbnails and the photos actually being found and able to be edited is just an annoyance, another annoyance, especially after spending more than the US citizens on an upgrade and there being more bugs than the beta.
    The blank thumbnails on a pc is just as frustrating, at least the database seems to be robust enough to allow CTRL- ALT - DELETE several times an hour.
    Still, i like LR, though bibble 5.0 pro looks interesting, bloody messy interface though....
    Maybe this version of lightroom is the bugga, the previous was the beta and we will get a LR2.23 which will be LR 2.23 brilliant.

  • In Numbers, I can see my documents but they have the top right corner turned over with a down arrow, what does that mean?

    In Numbers, I can see my documents but they have the top right corner turned over with a down arrow, what does that mean? I touch it and nothing happens.
    I have recently done a full restore because my iPad and iPhone were mis-behaving and wouldn't work they way I expected with Windows XP and Outlook 2003 and now when I check iCloud.com, all my documents are gone, yet my iPad hints that they may still be somewhere but where are they?

    That is the orientation lock symbol, you can not go to landscape orientation. Tap the home button twice, swipe the task bar to the right, tap on the 'circle' icon at the left to unlock the orientation. You will then be able to view items in portrait and landscape mode.

  • Perform an action on close from the close button in the top right corner

    Hello.
    I am working on an application that consists of a main fraim and multiple internal frames. Some of the menu items must not be enabled unless an internal frame is opened and if that internal frame closes the menu items must be disabled again. Now before opening the internal frame i do have the items setEnable(fase), and when i open the internal frame i setEnable(true). The problem is that i dont know how to perform an operation when i close the internal frame by the little box with the x in it, located in the top right corner of the internal frame, so i can setEnable(false) them again.
    Any help will be appreciated!

    Use the InternalFrameAdapter. that has listeners for internal frame events..
    use the particular method that you might be interested in ,
    void internalFrameClosed(InternalFrameEvent e)
    Invoked when an internal frame has been closed.
    void internalFrameClosing(InternalFrameEvent e)
    Invoked when an internal frame is in the process of being closed.
    void internalFrameDeactivated(InternalFrameEvent e)
    Invoked when an internal frame is de-activated.

Maybe you are looking for

  • Ipod skips songs and / or freezes, won't play any song

    Listening to my ipod I skipped to next track, but no sound came. Looking at display I noticed that the ipod had skipped about twenty tracks. Tried going back to track I wanted to play but ipod wouldn't play it - time display stuck at 0.00 for a few m

  • Full screen plugin or add-on code works for every page except the start page ?? special containers on the new start page ?

    Use Matt Brubecks Full screen plugin or just write a new Addon for Firefox for android (23.0) Load add-on. If you are on any tab other than the awesome screen.. it works and goes to full screen (although there are minor issues with container layout)

  • Export Help

    Hello - For years now, I've been downloading my Canon AVCHD home movie footage to Final Cut Pro (first 7, now X) and then burning the resulting project to Bluray via Final Cut's "Share" command.  The resulting blurays looked stunning.  As of late, ho

  • UPgrade qs from 4.6 c to ECC 6.0

    My client is looking to move from 4.6C to ECC 6.0. Now, it is using BAs as the legal entities instead of compay codes, its also using Internal Orders to capture all the revenue and cost centers for expenses as well as balance sheet items (changing th

  • Keep Getting Below Error When Attempting to install Indesign on Additional PC..HELP!

    Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW050 ... WARNING: DW016 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 15 error(s), 4