HT201413 ? I have an iPad 3 and it just keeps power cycling.  I have tried to restore it with iTunes several times and it keeps coming up with Error 9.  Loss of USB connection.  I have tried different cables and ports and it wont come back to life.

Can't seem to figure this out on my own.  My apple store is 90 minites away and I would like to not burn up a weekend traveling to the store just to have it sent away.  Any ideas what I can do to get my iPad3 from power cycling.  I am up to date on all software updates.

Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Similar Messages

  • I have installed and reinstalled iTunes several times.  I am still getting an error that there is no disc burning software found.  I was able to burn discs on the earlier version of ITunes.  Now what?

    I have installed and reinstalled iTunes several times.  I am still getting an error that there is no disc burning software found and the computer keeps telling me to reinstall iTunes - it says that there is other burning software that is interferring but I haven't installed anything lately.  I was able to burn discs on the earlier version.  Now what?

    Many thanks b Noir
    This is a copy of ONEof the keys  in the registry I changed  as told by Apple support today. I also have changed others as instructed by GEAR  software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others  they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so  I downloaded the software and installed again.
    Sorry, just this minute went to insert image  and it is giving me a message saying this sort of content  is not allowed?.
    The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr  SiRem GEARAspiWDN.
    The GEARsoftware info about manually deleting  GEAR drive is from:
    http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
    I hope you can help

  • Got a new iPhone today and tried to restore from my old phone using icloud but kept coming up with a message that said problem with my icloud back up please help

    Got a new iPhone today and tried to restore from my old phone using icloud but kept coming up with a message that said problem with my icloud back up please help

    Hi there Clairemcaula,
    You may find the troubleshooting steps in the article below helpful.
    iCloud: Troubleshooting restoring an iCloud backup
    http://support.apple.com/kb/ts4036
    -Griff W. 

  • I cant install itnes 10.6.3 on my system(Dell xps 64-bit) , ive tried everything possible by downloading it several times but it keeps telling me 'there is a problem with the windows installer package. A program required 4 dis install to cmplete cant run

    i cant install itnes 10.6.3 on my system(Dell xps 64-bit) , ive tried everything possible by downloading it several times but it keeps telling me 'there is a problem with the windows installer package. A program required 4 this install to complete cannott run. Please contact your service vendor?.. Please what can i do?

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • My ipod touch just froze and wont come back to life...

    Sometimes it freezes during the use of an app, but then i just hold the button on the top left and it goes to the black screen, then the apple icon appears and then its all good. But now it's just black and no matter what I do, it won't change from the black screen. It connects to iTunes, and it charges because you hear that click that happens when it starts to charge but the black screen continues to appear. It's glowing, so it's not dead. What can I do? Should I go to an Apple Store, have them look at it. Should I restore it, and if I do, will it keep all my songs in iTunes?

    try holding down both the home button and the hold button. if that doesn't help try to restore the ipod touch. as long as your songs and everything are in the itunes library your songs should be fine.

  • When I shut my iphone 4 off and then turned it back on it said it need restored. But when I tried to restore it on itunes it said it couldn't go through with the task. What do I do?

    What do I do?

    Has the phone ever been jailbroken or hacked in any way? Has the computer you are using ever been used to hack any iPhone, or downgrade one with a utility such as tinyumbrella? If so the hosts file on your computer is corrupted, and you will have to fix that.
    This problem has also been reported by people who tried to install a bootleg copy of iOS 5. Could this be your problem?
    If none of these apply your security software may be blocking access to Apple's activation servers. Try disabling it or using a different computer. And you can always take it to an Apple store if convenient and they will restore it for you or fix it if it's broken.

  • I forgot my iPad password and I have tried to restore it but I am unable to because it says it is unable to because i'm connected to Find My iPad!

    I forgot my iPad password and I have tried to restore it but I am unable to because it says it is unable to because i'm connected to Find My iPad! I need to get onto my iPad because for some assignments I use my iPad. I want to preferably factory reset it.

    Try and force iPad into Recovery Mode:
    1. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    2. Connect USB cable to computer, leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

  • I have 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II.  How do I connect?  4000 only has 1 Display Port and 1 DVI.  5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute?

    I just bought a 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II.  How do I connect?  4000 only has 1 Display Port and 1 DVI.  5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute any work at all?  I read where on a PC they would work together, but on a MAC they do not.
    I read that Display Port has higher band width than DVI, NEC monitors for best performance they recommend using DIsplay Port.
    When I was setting this up I looked at a Nvidia Quadro 4000, unfortunately it was for PC, it had 2 Display Ports, in the Mac version they reduce it to one.  I did not think there could be a difference.
    Mainly want to use it for CS6 and LR4.
    How to proceed??? 
    I do not want to use the Quadro 4000 for both, that would not optimize both monitors, one DP and 1 DVI.  Using just the 5770 would work but I do not think the 4000 would be doing anything, and the 5770 has been replaced by the 5870.more bandwidth.
    Any ideas, I am a Mac newbie, have not ever tried a Mac Pro, just bought off ebay and now I have these problems.
    As a last resort I could sell both and get a 5870.  That would work, I'm sure of that, it's just that I wanted the better graphics card.
    Thanks,
    Bill

    The Hatter,
    I am a novice at Mac so I read all I can.  From what I understand the NEC monitors I bought require Display Port for their maximum performance.  The GTX 680 only has DVI outputs.  Difference from what I understand is larger bandwidth with the DP.
    You said I have the 4000 for CUDA.  I am not all that familiar with CUDA and when I do read about it I do not understand it. 
    A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000.  Is the 4000 doing anything with nothing connected?  I read where in a PC system the 2 cards would interact but in a Mac system they do not.
    Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
    So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
    I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are.  I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4.  Those NEC monitors are supposed to be top notch.

  • I have an iPad 1st generation that no longer has working volume buttons but every once in a while the sound turns on.  So I know the speakers still work.  I have tried resetting all settings and made sure that my side switch was auto lock not auto mute.

    I have an iPad 1st generation that no longer has working volume buttons but every once in a while the sound turns on.  So I know the speakers still work.  I have tried resetting all settings and made sure that my side switch was auto lock not auto mute. I have tried the mystical swiping upward on the screen with 4 fingers to get some special sound menu (which I never succeeded in getting).  My headphone jack doesn't work all the time either so some times my kids can hear their games and sometimes they can't.  I am super frustrated at this point.  So any suggestions would be great.  Am I missing something basic or do we just have a soundless iPad now?

    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
     Cheers, Tom

  • I just replaced the hard drive for my Mac Pro, and I am trying to restore what is on my Time Capsule, but it wont connect, and only is giving me the pinwheel of death. What do i do?

    I just replaced the hard drive for my Mac Pro, and I am trying to restore what is on my Time Capsule, but it wont connect, and only is giving me the pinwheel of death. What do i do?

    You will need to boot from some alternate boot device to accomplish this, if you did not initialize the drive before installing it.
    If you have another Mac, you may be able to use FireWire target disk mode.
    If your MacBook has a DVD reader and you have a Mac OS X Installer/Utilities DVD, such as the one that shipped with it, you can boot from that DVD, answer only the "what Language" question, and wait a quarter minute for the MenuBar to be drawn. Then examine the Utilities menu or the Installer menu and Find Disk Utility.

  • I have an ipad mini that won't power on. It was turned off to charge overnight. In the morning it was warm and now won't turn on no matter what I do. I've tried resetting using the power / home button combination and nothing works.

    I have an ipad mini that won't power on. It was turned off to charge overnight. In the morning it was warm and now won't turn on no matter what I do. I've tried resetting using the power / home button combination and nothing works.

    If you have owned the device, as in purchased from Apple, less than a year then there will be no charge to repair, or most likely, replace the device. If you have had the device more than a year you will be charged an out of warranty cost for replacement ($219 I think) and that is much cheaper than a new device. If you have Applecare+ then you have an additional year of coverage and the replacement will be $49 or $79 depending on when you got the Applecare.

  • I have uninstalled and reinstalled itunes several times bc i cannot access the store.  still unable to....tries to access but then just stops. no error.  please help

    i have uninstalled and reinstalled itunes several times bc i cannot access the store.  still unable to....tries to access but then just stops. no error.  please help

    Try this:
    Go to command prompt (in windows XP, START/All Programs/Accessories/Command Prompt)
    Type in following:
    Netsh winsock reset
    Hit "Enter" key.  Restart computer.
    Now check & see if iTunes stores is back to normal.
    If not, try temporary uninstall your Security software & see if it works.

  • I forgot my password for my iphone 4 and it is now disabled. I am trying to restore it through itunes, but it say I have to put my passcode into my phone first. Is there a way to restore without using my passcode?

    I forgot my password for my iphone 4 and it is now disabled. I am trying to restore it through itunes, but it say I have to put my passcode into my phone first. Is there a way to restore without using my passcode?

    The instructions are in that link. Just follow them VERY CAREFULLY. Especially the part about:
    Turn off your device and leave it off.
    Plug in your device's USB cable to a computer with iTunes. [but DON'T connect it to the iPhone yet]
    Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
    When you see the iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 again.
    When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
    Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.

  • HT201412 I have an iPad 2 that just stopped working...no display...won't turn on...tried all steps in above article.

    I have an iPad 2 that just stopped working...no display...won't turn on...tried to sync to iTunes and couldn't because I need to put in my passcode. There is no display, so can't do this. Am dead in the water. Does anyone have ideas to solve this issue?

    Try force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

  • I have tried to download the update for itunes several times and it will not complete, i get an error message

    I have tried to download the update for itunes several times. Each time it get to the installation part and stall and then reverses and give me an erorr message. My current version when I open it, it says there is an error and I will not be able to download a CD into itunes, although I have completed several CD downloads.

    Go to http://www.mozilla.org/en-US/firefox/new/ and download the full installer. Run the installer and you will be up-to-date. Sometimes the updater just gets in a weird state...

Maybe you are looking for

  • Sender Mail adapter get no mails

    Hello, we are using the sender mail adapter to receive mails (IDOCS) from a Exchange server. A few days it works, but suddenly no mails are received. But in RWB the mail adapter status is green and shows, that there are no new mails. But when I check

  • How to set multiple alarms on E90?

    Hi guys, I want to set multiple alarms on a 24 hour period of the same day, please give hints on how this can be done, on my pervious handset I was able to set alarms for multiple dates & times. Solved! Go to Solution.

  • Preview Print is Boffo (V2)

    Someone tell me if I am doing something wrong of if Preview print just acts whack. I open three images in Preview: I. I do nothing and pulldown to Print and it will print the FIRST image II.I do nothing and pulldown to Print Selected and it will prin

  • Strange formating in narrow columns

    Each year I send out a newsletter in AW 10.4.6, formatted to look somewhat like a newspaper front page. This involves some more or less narrow columns. Of course this makes left-and-right justification a bit difficult. So on really ugly (space-filled

  • Error in Update of Register

    Dear All, Can anybody guide me or give me some overview, 1) when i am going to J1i5 transaction, to see the RG1 and RG23 Part 1details, i am not getting any thing under the screen. i did so many G/R with Excise and in register RG23A Part-1 and Part -