HT201436 Any other users of iPhone 5 getting feedback on calls?
There is feedback (like the noise following a vibration) when making calls, even when I've turned the volume down. I've reset the phone a couple of times.
Yes - I am having this problem and it it so frustrating. Only had iPhone 4 about three weeks - it was fine for the first fortnight but in the last week I've only been able to use it about 10% of the time, the rest of the time I've been getting a No Sim message, and then today it has turned into an 'Invalid Sim' message and then a 'SIM failure message.'
Have tried all the tricks - turning it off and on, flight mode, taking out SIM etc, and it works for a while then dies again.
Any new hints or tips for fixing this would be very welcome...
Similar Messages
-
I changed my primary email and icloud is still set for my old email. I tried deleting my icloud but it aks me for the old password associated with the old email that I don't have anymore. Any other sugestions on how to get icloud to change emails on my ios?
I figured it out! I changed my email & password at the icloud site, then when I deleted the icloud account on my iphone - it still showed my old email but when i typed in my current password it went through. I was then able to sign back in with my current email and password. That was too easy for the amount of time I have put into this! Glad its finally fixed.
-
IQ770 All other users logging on just get a blue screen
I have no problem logging on to the PC with my user account, but when any other user that I set up (or the Guest logon) attempts to log it says "Wecome" and then goes to a blue screen and that's it (even if the new User account is set up with Administrator privileges). If I do a CTL-ALT-DEL at that point it will bring up the screen that allows me to Switch User or shut down the PC - if I switch to my user account it says the other user is logged on but they just get the blue screen. Anyone have any idea what is going on or how to fix it? Thanks much.
Might be a virus.
I suggest creating a new account again, and wiping out their accounts if their data is saved.
If this doesn't work, either System Restore or System Recovery.
I have more HP devices than you'd expect.
1 HP TouchPad 32 GB with Android
2 HP Touchsmarts (310-1000z and IQ527)
2 HP Printers (J6480 and J5750)
1 Laptop (HP DV6253CL)
Have at least some experience in each of those devices, and i'll do my best to help you.
Kudos if I helped! -
I have updated my iPod and it deleted everything including my photos and I did not save my photos on any other device, How do I get them back?
You didn't import all of your pics regularly? Particularly before an update?
They may very well be gone.
You can try restoring from backup. -
Have personal Apple ID account which allows me to download apple apps but when I go to update the apps Apple ID pops up thats not mine and cannot log in to update apps. Brand new IPAD never any other user
Is the AppleID listed in Settings --> Store and Settings --> iCloud the same?
If it is a totally different ID and not a slight variation of yours, I would definitely take it back to the store. You may have bought a returned item that had been setup previously. -
When making a call, sometimes, my iPhone 5 , gets stuck on 'Calling' than I have to press END..but still nothing happens, than when I press HOME button, the call app keeps running in the background and it keeps saying CALLING... than I have to wait 2 - 3 minutes and call again.
please helpHas nothing to do with the SIM or master reset. This has been done to my phone. The SIM once and the factory reset many times over. You all just sold us a bad piece of equipment and have us by the tail with our contracts so none of us can get a new phone without paying full price or re-upping our contract. I just got off the phone last night with your high up tech people (you know, the hidden number we get once we tear into your support people enough), they went into my phone again and still didn't find anything wrong. I about got fired from my job for not getting my calls and texts. The BBB has now been contacted, and I feel your end should shore this up for all of us!
-
Can't log in to any other user account except admin
I have one computer (out of a lab full of 36 computers) that has a problem creating additional accounts beyond the first.
I can set up multiple other accounts (either admin, standard, or managed accounts), but I can't log in to any other accounts except the admin account. Here's what I do:
1. When the computer was unpacked I set up the admin user, and automatic login of the admin user using the usual Apple first run setup windows.
2. In System Preferences -> Accounts, I click the lock and enter my admin password so I can make other accounts. This works fine.
3. I create an account and give it a password (I've tried blank passwords too).
3a. The system warns me that automatic login is turned on (set to the admin user currently). I click the "Keep Automatic Login" button. The other account is now created and all looks well; I can see it's home folder in the Users folder.
4. I switch to the Login Options view, and choose that other account from the automatic login popup menu.
4a. The system prompts me for the account password. This is where the problem happens.
4b. On 35 of the computers, this works fine. One 1 computer, the system warns me that "You did not enter the correct password for your user account." I can click OK there, but nothing I enter for the password works.
I also tried logging out from the admin user, and I simply can not log in to any other account. I've tried one letter passwords; I've tried blank passwords; I've tried variations on account names; I've tried all-caps; I've tried all-lowercase. I can log in to the admin account with no problems; I can set up as many other accounts as I like, but I can't use any of them.
Any ideas? Should I just wipe the hard drive and re-install? That's certainly a viable option, but it's baffling me why it's only this one out of 36 computers having the problem.Smells like a corrupted OS installation. Two options. Erase & Install or hook it up to a good machine, via target disk mode, and clone the booted machine, using something like Carbon Copy Cloner, SuperDuper!, etc., after erasing and reformatting the calcitrant machine, and see if that fixes things.
-
Hi,
I am new to using EWS managed APIs.
Following is the issue:
1. I am using a service account e.g. [email protected]. This user is a global administrator and also has ApplicationImpersonation role assigned. (Sign into Online Office 365 account -> Admin -> select "Exchange" tab- > select Permissions
on the left panel -> create an impersonation role -> assign ApplicationImpersonation in Roles: and [email protected] in Members: -> Click on save)
2. Create a calendar item by other user for e.g. [email protected], and invite an attendee - [email protected].
3. In a c# program, I connect to EWS service using a service account - [email protected], fetch its calendar events. If organizer of an event is some other user - [email protected] then
I use impersonation in the following way to update the calendar event/item properties- subject, body text etc.
private static void Impersonate(string organizer)
string impersonatedUserSMTPAddress = organizer;
ImpersonatedUserId impersonatedUserId =
new ImpersonatedUserId(ConnectingIdType.SmtpAddress, impersonatedUserSMTPAddress);
service.ImpersonatedUserId = impersonatedUserId;
4. It was working fine till yesterday afternoon. Suddenly, it started throwing an exception "Access is denied. Check credentials and try again." Whenever I try to
update that event.
private static void FindAndUpdate(ExchangeService service)
CalendarView cv = new CalendarView(DateTime.Now, DateTime.Now.AddDays(30));
cv.MaxItemsReturned = 25;
try
FindItemsResults<Item> masterResults = service.FindItems(WellKnownFolderName.Calendar, cv);
foreach (Appointment item in masterResults.Items)
if (item is Appointment)
Appointment masterItem = item as Appointment;
if (!masterRecurEventIDs.Contains(masterItem.ICalUid.ToString()))
masterItem.Load();
if (!masterItem.Subject.Contains(" (Updated content)"))
//impersonate organizer to update and save for further use
Impersonate(masterItem.Organizer.Address.ToString());
// Update the subject and body
masterItem.Subject = masterItem.Subject + " (Updated content)";
string currentBodyType = masterItem.Body.BodyType.ToString();
masterItem.Body = masterItem.Body.Text + "\nUpdated Body Info:
xxxxxxxxxxxx";
// This results in an UpdateItem operation call to EWS.
masterItem.Update(ConflictResolutionMode.AutoResolve);
// Send updated notification to organizer of an appointment
CreateAndSendEmail(masterItem.Organizer.Address.ToString(), masterItem.Subject);
masterRecurEventIDs.Add(masterItem.ICalUid.ToString());
else
Console.WriteLine("Event is already updated. No need to update again.:\r\n");
Console.WriteLine("Subject: " + masterItem.Subject);
Console.WriteLine("Description: " + masterItem.Body.Text);
catch (Exception ex)
Console.WriteLine("Error: " + ex.Message);
5. What could be an issue here? Initially I thought may be its a throttling policy which is stopping same user after making certain API call limits for the day, but I am still seeing this issue today.
Any help is appreciated.
ThanksYour logic doesn't sound correct here eg
2. Create a calendar item by other user for e.g. [email protected], and invite an attendee - [email protected]
3. In a c# program, I connect to EWS service using a service account - [email protected], fetch its calendar events. If organizer of an event is some other user - [email protected] then
I use impersonation in the following way to update the calendar event/item properties- subject, body text etc.
When your connecting to [email protected] mailbox the only user that can make changes to items within
abccalendar is abc (or ABC's delegates). If your impersonating the Organizer of the appointment pqr that wouldn't work unless the organizer had rights to abc's calendar. If you want to make updates to a calendar
appointment like that you should connect to the Organizers mailbox first update the original, send updates and then accept the updates.
When you impersonate your impersonating the security context of the Mailbox your impersonating so its the same a logging on as that user in OWA or Outlook.
Cheers
Glen -
Any user can unlock any other user password protected screen?
Major problem I'm having...!
On my Macbook Air - both myself and my wife can unlock each others password protected screen saver?
Surely this shouldn't be the case...?
We are both admin - but I would of assumed each could only unlock it's own user password protected screen saver.
Any help would be appreciated...."That doesn't make sense...as the login window is available from that password protected screensaver also..."...
The option to switch to the loginwindow only appears if the "Fast User Switching" GUI is enabled in the "Accounts" pref pane. If that option were to be disabled and eg. a user on a shared computer went home without logging out, in the absence of "admin" access, that computer would be entirely unusable to other users short of pulling the plug, which might interrupt any background operations in progress.
I suppose the behaviour could be alterred depending on the "FUS" status, but really, what would be the point since, as you acknowledge, an "admin" user ultimately has the ability to access an open session anyway?
For reference, note that "admin" users, in addition to the "session owner" are granted the right to unlock the screen in the "/private/etc/authorization" file under the 'system.login.screensaver' key so the behaviour can be adjusted from there. -
Console login by any other user besides Admin
I noticed that if I try to login to the console display with another user besides admin the the login will hang. Also, any other type of login to the system will not work (ssh). I was going to do an oracle database install, which requires the oracle user to be logged in. Does anyone know if there is a way around this restriction?
This isn't a normal restriction - none of my servers prevent any user logging in on the console.
I suspect there's something amiss with your setup - probably in the directory where the OS is trying to load the account data (possibly the home directory data).
Sheck the server logs, especially /var/log/system.log for any directory-based errors. -
Connection issues with one computer - but not any other computer or iphone
I have a strange problem…. well, really it is my friends/co-workers problem, but I am his sponsor so I feel I need to be there for him.
We are both school teachers - and to help us in the eduction of our students we have created a wireless network (hidden so we don’t get caught!) that we can use in our area of the building. We have had it for several years and we have both hooked up to it regularly using our laptops and our ipod touch/iphone. Just recently my co-workers computer stopped being able to access the internet through the airport. We checked the settings, threw out the settings and re-entered them. Turned off the airport, turned it back on - typed in the network settings, connected - but no internet. We ran disk utility and repaired disk permissions. We have even gone as far as to create a new user…. still no luck. I have shut down and restarted the airport at school, still the issue remains.
He can see the shared disk attached to the airport, he sees my itunes library, I see his - and the rest of the teachers in the school see both of ours (we are music teachers, so our libraries are rather extensive!) and are constantly listening to our shared libraries. We know he is connected to the network, he just cannot access the internet. However, when he plugs in to the network (same settings) via ethernet - there is no problem he gets right into the network.
We both have airports at home - and we both have no problems connecting at home.
There are only two things that have happened since we noticed this problem… 1) is Snow Leopard - we believe the problem started AFTER that upgrade. and 2) we just got a new iMac Lab (I am teaching a new class - Audio Engineering this year) and in the lab I put a legal Airport - but that one IS NOT connected to the school network at all - it just allows all of the iMacs to access the shared hard drive (easier than running cable). This airport (new one - two channel) sits between his office and the old airport (single channel) that we use to access the internet and school network. I don’t think this is the problem as I have turned off the “new” airport and the problem remains.
Any ideas or suggestions would be greatly appreciated!!Hi,
Sounds like you had the same problem I had, which I resolved:
http://blog.irreverence.co.uk/?p=467
Hope it helps.
Kenny -
Certain webpages do not load in Safari or any other browser or iPhone..?
I'm having an issue with certain webpages loading on my Macbook...(ex. my bank site, Facebook). Sometimes I am lucky enough to get to the login page, but it stalls there. Since the issue started while using Safari, I tried using FireFox, but the issue persists..tried to access the same pages' mobile sites in Safari on my iPhone 4S and it doesn't load either and gives this message "Safari cannot open the page because it could not establish a secure connection to the server."
I've emptied my Safari history and cache, but it didn't help. It seems like this issue just started overnight!
I am running Leopard 10.5.8 on a late-2007 Macbook.
Please help, thanks!Is the iPhone using your Mac to connect?
See if the Mac has any Proxies set...
10.5/10.6 instructions, System Preferences>choose interface>Advanced>Proxies Tab, make sure none are set, like for HTTPS. -
Unable to Login in Portal as Administrator or any other User
When I try to login as Administrator in portal.. It do not display any error message but at top it still displays as GUEST only.. when i checked in I have cheked in log file PTMAchine.log it shows as 6/7/04 13:47:29- Connected as user 'Administrator' But doesnt display appropriate message on screen.
I have checked in database that the User Administrator exits... Table Name - PTUSERS LoginName - Administrator Password - Enrypted ThanksKalimuthu V wrote:
Vimal,
Are you getting any error stack or any particular error message other than what you mentioned?
Btw, if it is after some change or something better you raise an SR with Oracle support to get this fixed.
Thanks.
With Regards,
Kali.
OSSi.hi kali
No i didnt not get any error stack, page with above error only.
Actually i was trying to use digitle signature based approval for workflow notification and it got errored out. i closed the window and try to login with sysadmin user it got above message, I tried after sometime n now i am able to login. I could not understand the behaviour.
Regards -
How to create a new user without any sample objects from any other user?
Question as the title.
I had the example dababase installed when I installed the Oracle database.
Every time, when I create a new user, there will be some example objects coming
with the new user.
How can I remove these objects from the new user?
Or, how can I create a new user without the example objects?
Thanks in advance.I think the easiest way for you would be to use OEM.
Just locate each object that you want to remove and right click->remove. Don't bother doing this for any indexes as these will be removed when you drop the corresponding tables.
If you want to try command line through sqlplus then identify the objects you want to remove by selecting from the user_objects view while logged in as this user. This will give you the name and type of object. Then issue the relevant drop command.
It's probably worth making sure you have a valid backup first, just in case things go wrong! -
Has anyone downloaded any video podcast to iphone and get only the audio?
Hey,
I downloaded few video podcasts. I had turned on Music Video, Podcast and Video syncs. But I see only the first frame of the video podcast and I can only hear the audio... no video... Has anyone faced the same problem and has anyone been able to solve this?This works the same way on the video iPod; a video podcast will show up both under 'Podcasts' and under 'Video'. If you play it under Podcasts, you only get the audio; if you play it under Video you see the video. Music videos work the same way.
Presumably this is useful if you just want to listen to the audio track of a video podcast and want to avoid the battery hit of displaying video you're not going to be watching. Frankly, though, it's confusing. Particularly on the iPhone, it'd be better to have a show video/don't show video option that you can select while the track is playing.
Maybe you are looking for
-
how do I transfer files and data from one user account to another? Thank you!
-
New SO goes through Vehicle Search and finds a match- How is Delivery Date?
If a new Dealer Sales Order goes through a Vehicle Search and a match is found, I have the following 2 questions: (1) How is the vehicle assigned (2) When Sales Order is created: Will there be an Availability check again How is FDD Calculated
-
ATT anyone running Fedora Core 4
Can anyone running Fedora Core 4 please compile and run the following code several times and post the output here. import java.math.BigInteger; import java.security.SecureRandom; class RndTest { public static void main(String[] args) { Se
-
Printing list of keywords used (xml file)
Hi! Back again after four "quiwt" month with the result of "empty brain" syndrome: How do I print the list exported list of keywords, the xml file? Thanks for any hints (= re-awaking grey cells)... Alexander
-
hey guys, Is it possible to compare two Screens from 46C to ECC and find the differences. for example, Screen layout and Field label texts changes between two systems. With respect to screen level. pls suggest me if any function module exists. Can so