HT201514 Please can someone tell me what is going on when I get this message, The backup disk image "/Volumes/Data/Carole Wilson's MacBook.sparsebundle" is already in use. Latest successful backup: Yesterday, 2:04 PM
Please can someone tell me what is going on when I get this message for the Time Capsule?
Yes, this is because Lion or ML which you are using have lousy networking.
The trick is simply reboot the TC..
Or on Lion use the 5.6 utility and disconnect all users.
For ML sorry.. Apple decided you don't need that function any more!!.
http://pondini.org/TM/Troubleshooting.html
Read C12.. I think C17 is also related.
Similar Messages
-
i am running 10.7.5 on an older MacBook and getting Time Machine error The backup disk image “/Volumes/Data/Kathy P’s MacBook.sparsebundle” is already in use. what do i do now?
See Pondini's TM FAQs, for starters.
-
time machine has been running smoothly for years- until now. i changed the name of the computer, and now i get the error message. any ideas? d
I have had more than 1 customer with this error recently. I believe the fix is to unplug the TIme Capsule (I was told you should leave it unplugged about 20 minutes, but can't tell you why that amount of time) then plug the Time Capsule back in and your problem should be solved.
Steve -
My normally reliable Time Machine is giving following error message;-
The backup disk image “/Volumes/Data/JOE OTOOLE’s Computer.sparsebundle” is already in use.
What does it mean and how do I deal with it?I have loaded it into ML using a great and free utility unpkg.. it probably works much the same as Pacifist.
Locate your downloaded 5.6 dmg file.. click it so you can see the pkg but don't bother opening it.
Download, install and run unpkg.
http://www.timdoug.com/unpkg/
Drag the airport utility 5.6 pkg over to unpkg.. and it will create a new directory on the desktop.. named AirPortUtility56.. drill down to Applications, Utilities and you will find the unpackaged utiity.. drag it to your main utilities directory or just run it where you are.. -
time machine: I get the following message: The backup disk image “/Volumes/Data-1/Clemens’s iMac.sparsebundle” is already in use - what to do? Where and how do I find that file and get rid of it?
I'm on Mountain Lion and have version 6.1 of AirPort utility so there is no button to "Disconnect All Users"and the only other option of "removing and re-selecting the drive via Time Machine Prefs" doesn't work either. So this will work.
Launch Airport Utility and select the TC "Edit" button, then select the Disks tab. Deselect "Enable File Sharing" and click "Update". The TC will reboot then follow the same procedure and reselect "Enable File Sharing" and click "Update". After TC reboots again you'll be up and running. Not the neatest way to do it but saves having to unplug the TC which risks disk damage and the whole procedure takes less than a minute.The "Enable File Sharing" button seems to have replaced the "Disconnect All Users" button but with the slight disadvantage that it reboots the TC which takes up additional time. -
I recently bought a new Time Capsule and the following message has started to show:-
"Time Machine could not complete the back up. The backup disk image “/Volumes/Data-1/Brian’s iMac.sparsebundle” is already in use."
Can anyone help?Pondini is the resident Time Machine expert on the forums, and he has all the answers.
Check is excellent Time Machine - Troubleshooting support document
http://pondini.org/TM/Troubleshooting.html
See # C17 in particular -
How do I fix this message from time machine: The backup disk image “/Volumes/Data/Jim Linnell’s Computer.sparsebundle” is already in use.
Restart the computer and your Time Machine backup system.
See also from More Like This:
what do I do about this time machine error message? The backup disk image “/Volumes/Data/Paul Brandow’s Computer.sparsebundle” is already in use.
Time Machine gives following error message;- The backup disk image “/Volumes/Data/JOE OTOOLE’s Computer.sparsebundle” is already in use. What does it mean? -
I have two Macs that won't back up to time capsule, says The backup disk image “/Volumes/Data/Douglas Chalmers’s iMac.sparsebundle” is already in use.
Please look over to the right of this page for the heading of More Like This.
There are multiple answers and solutions there. -
I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.
Make sure that no other Macs are backing up at the time.
Pull the power cable from the back of the Time Capsule
Count to ten
Plug the power cable back into the back of the Tme Capsule
Wait a few minutes, then try a backup again. -
The backup disk image “/Volumes/Data-1/Joe Sykes’ Computer.sparsebundle” is already in use.
First, restart the Mac and the Time Capsule. In most of the cases, this will solve the problem.
If it doesn't work, see > http://pondini.org/TM/C12.html -
I am getting this message when Timemachine tries to back up.
The backup disk image “/Volumes/Data/Lucio Bernal’s iMac.sparsebundle” is already in use.
Does it have something to do with Moutain Lion that I just installed?had the same problem and this fixed it, thanks!
finepiks wrote:
This will fix your problems:
Launch Airport Utility and select the TC "Edit" button, then select the Disks tab. Deselect "Enable File Sharing" and click "Update". The TC will reboot then follow the same procedure and reselect "Enable File Sharing" and click "Update". After TC reboots again you'll be up and running. Not the neatest way to do it but saves having to unplug the TC which risks disk damage and the whole procedure takes less than a minute.
I don't take credit for this fix but found it here:http://apple.stackexchange.com/questions/45569/disconnecting-disks-from-airport- extreme -
It did not complete the backup with this msg:
The backup disk image “/Volumes/Data-1/Steve’s iMac.sparsebundle” is already in use.
Any ideas?
Thanks.Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
This simple reset will fix this issue about 98% of the time. If you are in the unlucky 2%, more help from Time Machine wizard Pondini is here:
The Backup disk image ... sparsebundle ... is already in use. -
When i try to use time Machine for my backup i get this message: The backup disk image "volume/data/AnnePrybyla's imac.sparsebundle is already in use. What can i do
Look over to the right of this page under the heading of More Like This for multiple answers and solutions to this bug.
-
How to resolve the following time capsule error message:
The backup disk image “/Volumes/Data/XXXX Computer.sparsebundle” is already in use.If you are running Mountain Lion try this:
Open AirPort Utility (If you are in Mountain Lion this will be 6.0 or Higher)
Select you Time Capsule
Select the Disk Tab
Deselect "Enable File Sharing"
Click OK Let the Time Capsule Re-Boot
Go Back into AirPort Utility and re-select "Enable File Sharing" and let it Re-Boot again.
This should fix the problem.
If you are not running Mountain Lion the advice provided by other should work (http://pondini.org/TM/C12.html). The main thing is to reset users. -
The auto backup to my time machine has developed a glitch which prevents the backing up of the iMac. The message is as follows:
'The backup disk image "/volumes/data/Name iMac(7).sparsebundle" is already in use.
Any ideas on how to fix.Welcome to Apple Support Communities
Restart the iMac and Time Capsule. In most of the cases, this should solve that problem. If it doesn't work, read > http://pondini.org/TM/C12.html
Maybe you are looking for
-
How to install SQL Mgmt Studio on the front end
SQL 2008 R2 I need to install SSMS on the front end server. On the SQL Windows Server 2008 R2, When I click on START -->ALL PROGRAMS-->MICROSOFT SQL SERVER 2008 R2 I see the following: SQL Server Management Studio Analysis Services Configur
-
i have two tables like master and child having below records.Please find the records. Master table CODE STATUS ABC U ABC S Histrory Table CODE status ABC S I WANT THE RESULT STATUS COUNT U 1 S 2 i am using below query it is not working,It shows only
-
Can a Shape act as a selection tool?
Hello everyone Level: (Still a ...) Newbie OS: Windows 7 64bit Ps CS6 So, I am trying to make a fork (lemme tell ya, get;n those dang prongs are a B**** to
-
Tab carachter at the end of line
Hello! I am trying to upload a text file separated by Tab into SAP by an Abap program, but I have the following problem: - Code: constants: l_tab type x value '09'. split vl_line_file at l_tab into
-
Program to update po item condition
Hi I need to write a progra which will update PO item's condition. Prefer not to use BDC, BAPI_PO_CHANGE looks promising but doesn't update the item condition here's my code: s_po_i-po_item = P_ebelp. s_po_i-calctype = 'B'. s_pox_i-po_item