HT201516 My iMac is running very slowly and it takes about 1 hour more to install stuff on it than my other imacs
My iMac is running very slowly and it takes about 1 hour more to install stuff on it than my other imacs
It would help us to help you if we could have some more technical info about your iMac.
If you like, please go ahead and download, install and run Etrecheck.
Etrecheck was developed as a simple Mac diagnostic report tool by a regular Apple Support forum user and technical support contributor named Etresoft. Etrecheck is a small, unobstrusive app that compiles a static snapshot of your entire Mac hardware system and installed software.
This is a free app that has been honestly created to provided help in diagnosing issues with Macs running the new OS X 10.9 Mavericks.
It is not malware and can be safely downloaded and installed onto your Mac.
http://www.etresoft.com/etrecheck
Copy/paste and post its report here in another reply thread so that we have a complete profile of your Mac's hardware and installed software so we can all help with your Mac performance issues.
Thank You.
Similar Messages
-
Anyone know why a PowerBook G4 (w/ Leopard) operates super slowly? Went to see "Genius" at Apple store and they said they couldn't troubleshoot a "vintage" computer (5 years old). Funny, cause when I bought it for $3k they said it would be the last computer I'd really ever need to buy.
Slow behavior may have various reasons. Some were depicted by Texas Man. I have a question: why do you stay with 10.5.2? No reason to not update to 10.5.8, but do NOT do it before solving the slowness. Therefore, this may be due to a hardware problem (bad disk, for example, in most cases) or a software issue or others:
- too little free disk space, must be at least 10 % free
- too many apps sarting up at login as compared to memory installed; BTW, how much RAM is there?
- too many installed fonts and/or too many files on desktop
- too many apps starting up at login or, if not too many, incompatible with your system; uncheck all of them.
Therefore, take these one by one and solve them. If still bad, I would install a fresh system. You may test a fresh system unto an external drive, but you need a firewire port for this operation (you have 400 fw port), that generation cannot boot from USB devices. If system runs fast if thus installed, you may wish to install it unto your internal disk, after a good backup of data, of course. Make a clean, erase-and-install, this cleans up everything. If you cannot install (errors on installation), then your disk is dying. If this is the main cause of your trouble, then it will die anyway, so it is better to replace it. If you have a regular backup of data, nothing tragic may occur. -
I have an iMac 5.1 which is running OSx10.5.8 - it runs very slowly and I can't find if there is a particular problem. In the process, I have tried to install 10.6 [I have a new iMac] and the 5.1 won't accept the install discs.
As you have discovered... you cannot use the install discs from another Mac...
Re the iMac running OS X 10 5 8... and for your New Mac...
See Here for keeping your Mac Happy...
http://support.apple.com/kb/HT1147
http://www.thexlab.com/faqs/maintainingmacosx.html
http://www.thexlab.com/faqs/performance.html -
Hi, My iMac is running very slowly...please help
Hi, My iMac is running very slowly; both to start up and opening documents and apps like safari. I'me a simple web, mail and document user. I have run the Entrecheck - see below. Many thanks for any assistance you can offer.
EtreCheck version: 1.9.11 (43) - report generated 6 June 2014 18:06:10 BST
Hardware Information:
iMac (21.5-inch, Mid 2011)
iMac - model: iMac12,1
1 2.7 GHz Intel Core i5 CPU: 4 cores
4 GB RAM
Video Information:
AMD Radeon HD 6770M - VRAM: 512 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 3 days 9:24:59
Disk Information:
WDC WD1001FALS-403AA0 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (776.99 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5680H
USB Information:
HP Officejet 6500 E709n
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.2.19) Support
[not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.2.19) Support
[kext loaded] com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) Support
Startup Items:
HP IO: Path: /Library/StartupItems/HP IO
Problem System Launch Daemons:
[failed] com.apple.AOSNotificationOSX.plist
[failed] com.apple.wdhelper.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[not loaded] com.adobe.SwitchBoard.plist Support
[not loaded] com.logmein.logmeinblanker.plist Support
[running] com.logmein.logmeinserver.plist Support
[loaded] com.logmein.raupdate.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.sonos.smbbump.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
[running] com.wdc.SmartwareDriveService.plist Support
[running] com.wdc.WDRAIDDriveService.plist Support
[running] com.wdc.WDSmartWareService.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.hp.help.tocgenerator.plist Support
[failed] com.logmein.LMILaunchAgentFixer.plist Support
[running] com.logmein.logmeingui.plist Support
[running] com.logmein.logmeinguiagent.plist Support
[not loaded] com.logmein.logmeinguiagentatlogin.plist Support
[running] com.trusteer.rapport.rapportd.plist Support
[running] com.wdc.raidmanagerstatusmenu.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items:
Dropbox
Internet Plug-ins:
LogMeInSafari64: Version: 1.0.660 Support
Google Earth Web Plug-in: Version: 6.0 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
AdobePDFViewerNPAPI: Version: 10.1.9 Support
FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
DivXBrowserPlugin: Version: 1.4 Support
LogMeIn: Version: 1.0.660 Support
Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
LogMeInSafari32: Version: 1.0.660 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
NP_2020Player_IKEA: Version: 5.0.7.0 Support
AdobePDFViewer: Version: 10.1.9 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
Franker: Version: 1.3.1
Print Plus: Version: 1.1.0.2
Exposer: Version: 1.1
Close All Tabs: Version: 1.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
fbplugin_1_0_3: Version: (null) Support
RealPlayer Plugin: Version: Unknown
3rd Party Preference Panes:
Flash Player Support
Trusteer Endpoint Protection Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 930.71 GB Disk used: 207.08 GB
Destinations:
MyBook [Local] (Last used)
Total size: 0 B
Total number of backups: (null)
Size of backup disk: Too small
Backup size 0 B < (Disk used 207.08 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
1% WindowServer
0% softwareupdated
0% mds
0% hidd
0% launchservicesd
Top Processes by Memory:
78 MB com.apple.WebKit.WebContent
74 MB Safari
25 MB Officejet_6500_E709n__8619E1_
25 MB Finder
20 MB WindowServer
Virtual Memory Information:
202 MB Free RAM
642 MB Active RAM
470 MB Inactive RAM
841 MB Wired RAM
4.79 GB Page-ins
184 MB Page-outsYou have a LOT of crapware installed on your computer. I noticed:
[loaded] com.sonos.smbbump.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
[running] com.wdc.SmartwareDriveService.plist Support
[running] com.wdc.WDRAIDDriveService.plist Support
[running] com.wdc.WDSmartWareService.plist Support
Follow the developers instructions for each app and uninstall. Then restart in Safe Mode and then restart normally and retest.
OS X does not need third party apps to run well, and WD's software is total garbage and should be ignored. Their external HD's are pretty poor too, the enclosures WD uses tend to create a lot of issues with OS X. I would recommend buying higher quality EHDs, something like OWC Mercury Elite Pro series. -
After upgrading to OS X Lion Aperture 3.1.3 runs very slowly and crashes
After upgrading to OS X Lion Aperture 3.1.3 runs very slowly and crashes regularly when editing and/or exporting images. Prior to the upgrade these problems did not exist - has anyone else encountered this behavior and found a resolution?
My iMac has 2GB of RAM (max RAM is 3GB according to the machine specs) and uses a 2TB external drive for the Aperture library and Time machine backups.Thanks for the suggestions. Unfortunately after doing the Repair Permissions and rebuilding the Aperture Library the performance has not improved.
I cleared out the cache(s) by removing all of the files in the following folders and restarting:
Hard Drive/Library/Caches
Hard Drive/System/Library/Caches
Hard Drive/Users/(Your user)/Library/Caches
which seems to have helped a little bit. I did notice that in my Users folder there are 111 items:
username
username 1 (then folders with the same name up to 109)
Shared
could the extra username folders be causing the performance issue? In each folder is a Library folder, in the Library folder is a Preferences folder and in the Preferences folder is a com.apple.internetconfigpriv.plist file and sometimes a com.apple.LaunchServices.plist file.
Only the username 1's Library folder has the standard Caches, Fonts, Logs & Preferences folders.
Is it safe to remove the username 2 - 109 folders? If so is the creation of these folders something I can turn off? -
My imac is running very slowly, what can i do?
my imac is running very slowly, what can i do?
Your profile was way out of date so the updater I gave you will not be suitable. This thread does prove the need to keep up to date.
The 4GB is sufficient for your apparent needs though it may be helpful to apply the updater below for the newly advised OS. It may take some time; it is a biggie!
Mac OS X 10.6.8 Update Combo v1.1 Then check things out.
If that doesn't help check out the number of operations that are running in the background. If you have the iStat Pro app located in your dashboard, that will help. It's an excellent app - and free. See if they're all necessary.
Apple - Downloads - Dashboard Widgets - iStat Pro
Almost certainly others will chip in soon but hopefully I've set you on your way. -
My MacBook Air is running very slowly and has difficulty staying connected to wifi networks.
Problem description:
My mac is running very slowly and I have difficulty staying connected to wifi networks. I have only used half of my hard drive. My computer was purchased in Canada, where I used it for over a year but now I am living in the US.
EtreCheck version: 2.1.5 (108)
Report generated January 11, 2015 at 5:56:14 PM MST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Air (13-inch, Mid 2011) (Verified)
MacBook Air - model: MacBookAir4,2
1 1.7 GHz Intel Core i5 CPU: 2-core
4 GB RAM Not upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en0: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:31:38
Disk Information: ℹ️
APPLE SSD SM128C disk0 : (121.33 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 120.10 GB (59.92 GB free)
Core Storage: disk0s2 120.47 GB Online
USB Information: ℹ️
Apple Inc. FaceTime Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Internal Memory Card Reader
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Splashtop Streamer.app
[not loaded] com.splashtop.driver.SRXDisplayCard (1.6 - SDK 10.7) [Support]
[not loaded] com.splashtop.driver.SRXFrameBufferConnector (1.6 - SDK 10.7) [Support]
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Support]
[not loaded] com.avatron.AVExFramebuffer (1.7 - SDK 10.8) [Support]
[not loaded] com.avatron.AVExVideo (1.7 - SDK 10.8) [Support]
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[not loaded] com.splashtop.streamer-for-root.plist [Support]
[loaded] com.splashtop.streamer-for-user.plist [Support]
[not loaded] com.teamviewer.teamviewer.plist [Support]
[not loaded] com.teamviewer.teamviewer_desktop.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.leapfrog.connect.authdaemon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[running] com.splashtop.streamer-daemon.plist [Support]
[loaded] com.splashtop.streamer-srioframebuffer.plist [Support]
[not loaded] com.teamviewer.teamviewer_service.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[running] com.leapfrog.connect.monitor.plist [Support]
[loaded] com.splashtop.streamer-for-user.plist [Support]
User Login Items: ℹ️
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
AirDisplayStatusItem Application (/Library/PreferencePanes/Air Display Preferences.prefPane/Contents/Resources/AirDisplayStatusItem.app)
Dropbox Application (/Applications/Dropbox.app)
ScreenCapture Application (/Library/PreferencePanes/Air Display Preferences.prefPane/Contents/Resources/ScreenCapture.app)
Google Drive Application (/Applications/Google Drive.app)
Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
WDQuickView Application (/Incompatible Software/WDQuickView.app)
Internet Plug-ins: ℹ️
NPDjVu: Version: 6.1.1 [Support]
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
Google Earth Web Plug-in: Version: 5.2 [Support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.3.5.4 [Support]
PrintDialogExt: Version: 6.1.1 [Support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 Cannot contact Adobe
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
DirectorShockwave: Version: 11.0.3r470 [Support]
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]
3rd Party Preference Panes: ℹ️
Air Display Preferences [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
6% WindowServer
0% fontd
0% Dropbox
0% Google Drive
0% AppleSpell
Top Processes by Memory: ℹ️
236 MB Safari
150 MB com.apple.WebKit.WebContent
90 MB Google Drive
82 MB Dropbox
69 MB mds_stores
Virtual Memory Information: ℹ️
486 MB Free RAM
1.62 GB Active RAM
1.15 GB Inactive RAM
1.04 GB Wired RAM
1.85 GB Page-ins
41 KB Page-outs
Diagnostics Information: ℹ️
Jan 11, 2015, 05:30:50 PM /Users/[redacted]/Library/Logs/DiagnosticReports/AirDisplayStatusItem_2015-01-1 1-173050_[redacted].crash
Jan 11, 2015, 05:25:11 PM Self test - passedThanks!
Here is the results from running EtreCheck while in safe mode. (I hope I understood your directions correctly to do just that).
EtreCheck version: 2.1.6 (109)
Report generated January 20, 2015 at 8:41:33 PM MST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Air (13-inch, Mid 2011) (Technical Specifications)
MacBook Air - model: MacBookAir4,2
1 1.7 GHz Intel Core i5 CPU: 2-core
4 GB RAM Not upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en0: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 377
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 0:4:59
Disk Information: ℹ️
APPLE SSD SM128C disk0 : (121.33 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 120.10 GB (59.56 GB free)
Core Storage: disk0s2 120.47 GB Online
USB Information: ℹ️
Apple Inc. FaceTime Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Support]
[not loaded] com.avatron.AVExFramebuffer (1.7 - SDK 10.8) [Support]
[not loaded] com.avatron.AVExVideo (1.7 - SDK 10.8) [Support]
Problem System Launch Daemons: ℹ️
[failed] com.apple.ucupdate.plist [Details]
[failed] com.apple.watchdogd.plist [Details]
Launch Agents: ℹ️
[not loaded] com.google.keystone.agent.plist [Support]
[not loaded] com.splashtop.streamer-for-root.plist [Support]
[not loaded] com.splashtop.streamer-for-user.plist [Support]
[not loaded] com.teamviewer.teamviewer.plist [Support]
[not loaded] com.teamviewer.teamviewer_desktop.plist [Support]
Launch Daemons: ℹ️
[not loaded] com.adobe.fpsaud.plist [Support]
[not loaded] com.google.keystone.daemon.plist [Support]
[not loaded] com.leapfrog.connect.authdaemon.plist [Support]
[not loaded] com.microsoft.office.licensing.helper.plist [Support]
[not loaded] com.splashtop.streamer-daemon.plist [Support]
[not loaded] com.splashtop.streamer-srioframebuffer.plist [Support]
[not loaded] com.teamviewer.teamviewer_service.plist [Support]
User Launch Agents: ℹ️
[not loaded] com.adobe.ARM.[...].plist [Support]
[not loaded] com.leapfrog.connect.monitor.plist [Support]
[not loaded] com.splashtop.streamer-for-user.plist [Support]
User Login Items: ℹ️
iTunesHelper Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
AirDisplayStatusItem Application (/Library/PreferencePanes/Air Display Preferences.prefPane/Contents/Resources/AirDisplayStatusItem.app)
Dropbox Application (/Applications/Dropbox.app)
ScreenCapture Application (/Library/PreferencePanes/Air Display Preferences.prefPane/Contents/Resources/ScreenCapture.app)
Google Drive Application (/Applications/Google Drive.app)
Google Chrome Application Hidden (/Applications/Google Chrome.app)
WDQuickView Application (/Incompatible Software/WDQuickView.app)
Internet Plug-ins: ℹ️
NPDjVu: Version: 6.1.1 [Support]
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
Google Earth Web Plug-in: Version: 5.2 [Support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.3.5.4 [Support]
PrintDialogExt: Version: 6.1.1 [Support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 16.0.0.257 - SDK 10.6 [Support]
Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.257 - SDK 10.6 Cannot contact Adobe
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
DirectorShockwave: Version: 11.0.3r470 [Support]
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]
3rd Party Preference Panes: ℹ️
Air Display Preferences [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
4% WindowServer
0% AppleSpell
0% notifyd
0% fontd
0% opendirectoryd
Top Processes by Memory: ℹ️
241 MB Safari
168 MB Finder
129 MB com.apple.WebKit.WebContent
103 MB WindowServer
77 MB CalendarAgent
Virtual Memory Information: ℹ️
139 MB Free RAM
1.85 GB Active RAM
1.75 GB Inactive RAM
537 MB Wired RAM
810 MB Page-ins
164 KB Page-outs
Diagnostics Information: ℹ️
Jan 20, 2015, 08:37:12 PM Self test - passed -
Only Hotmail running very slowly and errors in loading correct page
recently Hotmail havs taken a long time to load pages. Plus when a email is selected page flickers and wrong page displayed.
this is not happening with Yahoo mail. Sometimes error message such as "not responding" or "cannot complete". But only when trying to get hotmailHi Larry,
Thankyou for your reply, this is a partial answer
This server has been running for about 3 years now,
The faults started after I did an service pack update for sharepoint. I then did the manual update but the C drive then started to run very slowly and was giving disk size too low errors so I moved the SUS to a different drive but this hasnt helped. It is
still running painfully slow. Ran SBS BPA and found no faults. However ran Exchange BPA and did find faults which I have now fixed. Still have large number of errors
Brian -
IMac suddenly running VERY slowly
My 3 yr old iMac has suddenly started running very slowly. from boot up (10 minutes) onwards. Every action seems to result in multi coloured spinning wheel and sometimes blue spinning wheel. No anti virus loaded, plenty of memory and space on HD, No recent new applications, no cpu grabbers Have tried Mac general solutions (Safe Boot etc) - no change. Have removed a couple of apps - no change - HELP!!! Any ideas.
Hi ..
Remove all items in System Preferences > Users & Groups > Login Items
Same for /Library/StartupItems
Then restart your Mac. See if that made a difference.
If it's not a login item issue, check the starutp disk.
Launch Disk Utility located in HD > Applications > Utillities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If DU reports errors, restart your Mac while holding down the Command + R keys. From there you should be able to access the built in utilities in OS X Recovery to repair the startup disk.
Make sure to back up all important data first before using OS X Recovery. -
My iMac suddenly runs very slow and freezes frequently. Ideas?
My iMac has started running very, very slow and then suddenly freezes and we have to reboot. I have no idea how to fix that....
Charly,
That's not much info to go on. Sorry you are having a problem.....
I can suggest a couple of things....
Go to "Applications>Utilities>DiskUtility"
..... run "First Aid" as shown in red boxes below....
This just might help... at least it is a start.....
I routinely use a little clean/maintenance utility called "OnyX" it performs lots of good house keeping stuff...
If this dosen't help you are going to have to ask someone smarter that I am......Again, it is a starting point at least.........
Good luck...... -
My iMac suddenly runs very slowly
My iMac began running extremely slow suddenly. I have a photography and design company that I rely on the speediness of my machine. I ran an EtreCheck. Can someone decipher what may be causing this?
Problem description:
iMac suddenly running slow
EtreCheck version: 2.1.2 (105)
Report generated December 10, 2014 at 8:34:27 PM CST
Hardware Information: ℹ️
iMac (21.5-inch, Late 2013) (Verified)
iMac - model: iMac14,3
1 2.9 GHz Intel Core i5 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
NVIDIA GeForce GT 750M - VRAM: 1024 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 1:9:3
Disk Information: ℹ️
APPLE HDD ST1000LM024 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (629.51 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Seagate Expansion Desk 3 TB
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 315 MB
Seagate Expansion Drive (disk1s2) /Volumes/Seagate Expansion Drive : 3.00 TB (1.82 TB free)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Western Digital My Passport 0730 500.07 GB
S.M.A.R.T. Status: Verified
disk2s1 (disk2s1) <not mounted> : 32 KB
New Bloom External HD (disk2s3) /Volumes/New Bloom External HD : 499.94 GB (33.48 GB free)
H850S 81
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.logmein.driver.LogMeInSoundDriver (4.1.46f67) [Support]
[loaded] com.seagate.driver.PowSecDriverCore (5.2.6 - SDK 10.4) [Support]
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.6 - SDK 10.4) [Support]
[loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6 - SDK 10.5) [Support]
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.6 - SDK 10.4) [Support]
Problem System Launch Agents: ℹ️
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cmfsyncagent.plist [Details]
[failed] com.apple.coreservices.appleid.authentication.plist [Details]
[failed] com.apple.recentsd.plist [Details]
[failed] com.apple.security.cloudkeychainproxy.plist [Details]
[failed] com.apple.spindump_agent.plist [Details]
[failed] com.apple.telephonyutilities.callservicesd.plist [Details]
Problem System Launch Daemons: ℹ️
[failed] com.apple.ctkd.plist [Details]
[failed] com.apple.icloud.findmydeviced.plist [Details]
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist [Details]
[failed] com.apple.softwareupdated.plist [Details]
[failed] com.apple.wdhelper.plist [Details]
[running] com.seagate.TBDecorator.plist [Support]
[failed] org.cups.cupsd.plist [Details]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[running] com.adobe.AdobeCreativeCloud.plist [Support]
[running] com.logmein.logmeingui.plist [Support]
[running] com.logmein.logmeinguiagent.plist [Support]
[not loaded] com.logmein.logmeinguiagentatlogin.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[running] com.logmein.logmeinserver.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.adobe.ARM.[...].plist [Support]
[running] com.seagate.dashboard.plist [Support]
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Support]
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
QuickTime Plugin: Version: 7.7.3
Silverlight: Version: 5.1.30317.0 - SDK 10.6 [Support]
JavaAppletPlugin: Version: Java 7 Update 71 Check version
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Java [Support]
Seagate Dashboard for Mac OSX [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 369.83 GB
Destinations:
Seagate Expansion Drive [Local]
Total size: 3.00 TB
Total number of backups: 76
Oldest backup: 2014-04-19 01:52:26 +0000
Last backup: 2014-12-11 01:17:13 +0000
Size of backup disk: Excellent
Backup size 3.00 TB > (Disk size 999.35 GB X 3)
Top Processes by CPU: ℹ️
22% Seagate Dashboard 3.0
4% WindowServer
3% com.apple.WebKit.Networking
2% Adobe Photoshop Lightroom 5
1% Safari
Top Processes by Memory: ℹ️
893 MB Seagate Dashboard 3.0
429 MB Adobe Photoshop Lightroom 5
352 MB Adobe Bridge CC
215 MB Adobe Photoshop CC 2014
180 MB com.apple.WebKit.WebContent
Virtual Memory Information: ℹ️
145 MB Free RAM
1.80 GB Active RAM
1.48 GB Inactive RAM
1.06 GB Wired RAM
4.39 GB Page-ins
103 MB Page-outs
Diagnostics Information: ℹ️
Dec 10, 2014, 07:26:03 PM Self test - passed
Dec 10, 2014, 08:12:43 PM Adobe Photoshop CC 2014_2014-12-10-201243_Ashleas-iMac.cpu_resource.diag [Details]
Dec 7, 2014, 11:21:39 PM Adobe Photoshop Lightroom 5_2014-12-07-232139_Ashleas-iMac.cpu_resource.diag [Details]1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Every day my iMac seems to run slower and slower. I have cleaned up the disk using Space Gremlin but it is still unbearably slow. Does anyone know of a simple solution?
Thanks in advance for any help.
Steve (Nerja, Malaga, Spain)close apps you don't use if a lot of background apps are running it will slow it down
and you could also inc the memory installed
or replace the harddisk with a ssd disk -
When recharging the transformer gets extremely hot , so hot i am afraid it will melt down. It takes almost 20 hrs to reach 100%. Any ideas?
This is very unusual.
If you are using cable that came with your iPad than I suggest going to the nearest Apple Store. This does not seem to be a software issue so I can not help you with that -
My iMac is running very slowly
All of a sudden my iMac (2.8 GHz Intel core 2 Duo) has slowed to a crawl. Applications take quite awhile to open and often I need to 'force quit' them. Any suggestions?
Things You Can Do To Keep Your Computer From Slowing Down
If your computer seems to be running slower here are some things you can do:
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file. -
Hello all I have recently pulled out my 3TB Time capsule and attempted to use it to back up my all Mac network, starting with just my desktop. I gave up on it before and started using Time Machine with WD EHD's which work fine. The reason that I gave up was that the Time Capsule kept freezing and hanging and I couldn't rely on it for a back up. I have reset it to factory settings and reconnected it as per the instructions, using it to extend my network, the hub is a BT infinity setup. Anyway it looks like it is going to run, then keeps shutting down my internet connection and I suspect it is taking longer to run the backup than it should. Has anyone else had this problem or can help please?
What model is the 3TB TC??
If the computer is using Yosemite the setup of the TC needs to be right. It can also be hardware issue if you are talking about the previous gen4.
Here is a list of things that can help with yosemite.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 for basestation and and TCwifi wireless name.
If the issue is wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. ie plan on a first and second round of changes to fix this.. hopefully.. I will point out other steps that can be round2.
2. Use all passwords that also comply with 1. but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. If the TC is main router you can skip this point. This is only an issue when the TC is bridged.
Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only. Do the same for ethernet if you use it.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the computer itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/
Maybe you are looking for
-
is it possible to use an iphone 5s with contract(verizon) to use it in india after unlocking
-
DAC is running contineously for SIL Service Request Fact
Hi All, Help is needed.! I am using DAC 7.9.4. I have started Incremental Load for the DAC. It went fine for first few runs, now it is showing that SIL Service Request Fact is running. This is running from last 4 days continuously. I have alreday che
-
Hi, In Query, i am having National Key, Regional Key, Area Key three separate fields. In Discoverer Plus, I am giving one parameter as KEY . They LOV is NAtional, Regional, Area. If i am choosing anyone of this, it should take from corresponding fiel
-
Hello. I'd like to protect my video (flv/progressive) by assuring it's requested by a 'valid' swf. Valid means hosted in a valid web page. In other words, if someone copies the HTML code (<object/embed> , and paste it in another web page, the swf wil
-
hi, ERROR : adobe flash plugin has crashed please try again. I upgraded mozilla and flash player to latest version but still the same