HT202157 How can I set time and date in the Apple TV???  This step doesn't let me go on with installing itunes!

The area is set for San Juan, PR, but it doesn't recognize the date and time.

This indicates a network issue.  Ensure DNS settings are set to Automatic and the regional settings are correct.

Similar Messages

  • How long should setting time and dates take?

    I have hooked up my apple tv, and it is still "setting time and date" after 2 hours.
    How long should it take?

    You have a network problme.  ATV is not able to connect to the internet, so it is not able to set it's date and time.

  • Why my atv can't set time and date after restoring it using itunes ?

    when my atv restarting after  I restored it using iTunes, it can't set the time and date.
    the atv is connected to the net by wi - fi.
    when I try to sign in using my apple id, I get a massage that the password is incorrect.
    I have apple tv with ios 7.

    The network and signal test on device won't give the full picture, for that you need a network report. Go to istumbler, netstumbler or similar, that will show true signal strength as well as any nose detected. You can also try Ethernet to help rule out WiFi issues.

  • Can not set time and date fax setting on officejet 4620

    Can not set the time and date on Officejet 4620 when faxing.  There are no setup options available.  The log always shows "Jan 00  00:00 AM".

    The time and date setting should be under the setup tools or fax setting in the printer control panel.1. Click the wrench icon on the control panel of the printer.
    2. Scroll to Tools.
    3. Scroll to Time and date.

  • Constantly being asked to set time and date (Apple TV 2nd Gen)

    I am constantly being asked to set time and date on my Apple TV 2nd Gen. Has anyone had this problem? I get the screen with this message about 10-15mins after I connect to my home network. I connect, everything works fine, but then streamin, browsing stop and this screen appears. Any help would be appreciated.
    Thanks!!

    what if you try something simple as to restart your phone and check again. 
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • KDE: Setting time and date automatically

    I've never been able to set the time and date automatically in KDE time settings. When I check the "Set time and date automatically" and authenticate myself, I always get the error message "Unable to contact time server: .". I'm wondering whether it's an upstream bug or I'm missing some required package? Does it work for you?

    matt101 wrote:I don't get it i have installed ntpd using pacman -S ntp . And then after it installed I restarted my computer and i still can't change the time to London and am still getting the "Unable to contact time server" error. Am i misinterpreting this or what? Could somone please explain to me in simple terms how to make the KDE clock show London time?
    Have you set ntp correctly?
    Also go to http://www.pool.ntp.org/en/use.html you'll have all the answers there.
    in short try this:
    ntpq -p
    If nothing happens you did something wrong, if it does, then it already works just remove ntpd or openntpd from daemon array.

  • How do i reset time and date on my itouch

    how do I reset time and date on my itouch?

    Go to Settings>General>International and make sure that Calendar is set to Gregorian.
    Bext
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • How To Include Current Time and Date in Form

    Does anyone know how I can include the time and date in the
    body of a form mailer? Our system allows the receiver of each
    submitted form to copy the body of the form entries and paste them
    into either Excel or FileMaker for database building. They would
    like to have the time and date also appear somewhere in the
    submitted body so they will not have to do a seperate copy/paste of
    the time and date seen in the header... I followed the javascript I
    found in the Adobe website and included it within the form, but
    when I ran a test nothing showed! Here is the form...
    Click
    Here to see the Form
    Thanks for your help! -D

    Can you not use when the email's timestamp?
    Also, in z7's script, beware the common mistakes, if you try
    to retype it - .getDate() gives the day of the month (1-31), but
    .getDay() gets the day of the week (1-7). To make it more
    confusing, .getMonth() gets the month (0-11), so you have to add
    one to make it human-readable. The script posted is correct, but I
    went round and round with my PC when I tried to do that the first
    time!

  • How can I set PCTUSED and PCTFREE in Warehouse databases?

    Hi,
    There are many Schemas in our database and some are used for OLTP and some others are used for Warehouse. Also our tablespaces are Local Managed.
    Could you help me please how can I set PCTUSED and PCTFREE for Warehouses and OLTP.
    What are your suggestions? What should be optimum?
    DB version is 9.2.0.8.
    thanks & regards

    If you are using locally managed tablespaces with ASSM then the pctused parameter would no longer apply. In all cases dictionary vs locally managed with or without ASSM you should set pctfree based on how much of the data row column values are present at initial row insertion and how likely any column is upated to a larger size after initial row insertion.
    In a warehouse I would expect most of the tables to have 100% of the row data present at initial insert and for the data to never be updated. For tables meeting this requirement a pctfree of 3 - 5% would likely be a good choice. I never like to use 0% since the day may come when you add another column to the table.
    With OLTP tables the ideal pctfree value varies more from table to table. Most table so seem to work well enought with the default 10% but I have seen tables that need 50% pctfree to prevent row migration since only the key column values existed at initial insert and most all the other column data was added later.
    Where ASSM is not in use I like to set pctused to 95 - pctfree. Over the last 15 years I am not sure I ever found a need to change the pctused from this once set. I have set a lot of tables up over the years from the old default of 40% to use 60% and 80% before resetting everything during a server platform migration as I mentioned above.
    HTH -- Mark D Powell --

  • How to get current time and date??

    How to get current time and date from my PC time and date to the java application??
    i use java.util.* package but got error, that is:
    - java.util.* and java.sql.* class are match
    - abstract class cannot be instantiated
    so what can i do, pls guide...thanks...

    There is a method in the System class that will return the current system time. You could also instantiate a Date, Time, Timestamp, or Calendar object, all of which get created with the system time by default.
    Don't import *. Import the specific classes you need.
    Next time, post the actual text of the exceptions/compile errors. If you make people guess, most just won't bother.

  • Unable to set time and date

    im trying to set up my apple tv just after ive updated to the latest version, but it wont pass the setting time and date screen
    what can i do?
    HELP!

    Hello john.george,
    You may need to verify that TCP port 123 is open and available for use on your router.
    TCP port 123 is used to communicate with a network time server.
    Apple TV: TCP and UDP ports and protocols used
    http://support.apple.com/kb/HT2463
    Cheers,
    Allen

  • HT1600 I have an apple tv  about two years old. Bought for a present and they never took it. I tried to hook it up cut it get stuck on setting time and date. Any help?

    I have an apple tv  about two years old. Bought for a present and they never took it. I tried to hook it up cut it get stuck on setting time and date. Any help?

    If you can view the main home screen, try selecting "settings" on the far right, then choose recent at the bottom. If not, try just unplugging power for a few minutes, then plug in and try again. Keep in mind you'll need a wireless connection and there may be several updates. Hope this helps-

  • How can I set up iMessage to ensure the text messages people are sending me arrive both on my computer AND on my iPhone as well?

    How can I set up iMessage to ensure the text messages people are sending me arrive both on my computer AND on my iPhone as well?

    Use the same ID in Settings > Messages > Send & Receive on both devices and have people use that ID. Your iPhone number would be a good choice.

  • I'm in the activation process for setting time and date but been stuck in that screen for a while please help

    just installed my Apple TV and it's been in the activation screen to set time and date for a while .
    not sure what the issue is

    It's not properly connected to the network
    Make sure location is set correctly
    DNS should be on auto (settings - general - network)
    If on wifi try Ethernet
    Check that router has port 123 open (refer to manual if unsure)

  • I have an old airportextrem how can i set up and this massge on my iphone a70ebe

    an old airportextrem how can i set up and this massge on my iphone a70ebe

    What exact model of the AirPort Extreme do you have? If it is an 802.11g version, you will NOT be able to administer it from your iPhone as its version of the AirPort Utility is not compatible.

Maybe you are looking for

  • Feather a selection in CS3 gives unexpected reults

    I have just upgraded to Photoshop CS3 from (CS2) and have discovered a very annoying problem with the feather command: In previous versions (CS2 and earlier), if you select a part of an image, including borders, and then apply the feather command, th

  • FXG does not change image after saving.

    I have installed the fxg plugin.  I can make edits and save, however, in Catalyst the image does not change.  I have follwed the instructions to the letter, but no changes are made. I refreshed the artboard but that didn't help either.  What am I mis

  • Display Format (Video) Frames problem

    The timecode display when set to frames is not working correctly in CS4. When you specify Frames instead of timecode it does not change. Project Settings>General Video | Display Format | Frames Can others reproduce this? Seems like a bug to us. Link

  • Load XML from applicationStorageDirectory

    Hi all, I want my app to check the applicationStorageDirectory for an xml file and add an empty one if it is not there. Once this is done I want to load that xml file and work with in the app. I am trying to use the following method: private function

  • Global application of CSS

    "Learning" as I go with DW CS4.. I have made a number of photo albums... all default settings using FireWorks. The results are pretty plain so I individually touched up the index.html files for each album.. changed fonts / color and added a backgroun