HT203052 what incoming ports need to be open?

My windows pc at work does not get updates. Outgoing is ok. I am sure its our firewall, but what ports need to be open?

Hi there Brett Higginbotham,
I see that you have done a little troubleshooting and determined that the ports may not be the issue that is preventing you from connecting to the iCloud Drive. You may want to take a look at the following link to help you continue troubleshooting, as it may resolve the issue from a security software standpoint:
iCloud: Making sure that iCloud works with security software in Windows - Apple Support
http://support.apple.com/en-is/HT203586
You may also find some more helpful information and links regarding this issue in the following article:
Get help using iCloud Drive - Apple Support
http://support.apple.com/en-is/HT203052
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Similar Messages

What is the Firewall ports need to be open for TED distribution working properly

Hi ,
May I know what ports need to be open at the firewall in order the TED
distribution to be working properly.
I suspect it is firewall problem because the inventoried server which
is install at the same segment with the TED distributor server, I manage to
push the policy and collect inventory data , but for those inventoried
server which is install at the remote site, I fail to push the TED into the
server. At the TED distributor server, the log say that computer refused
connection. And there is a firewall in between the TED distributor server
and the remote inventoried server.
Thank you.
Steven Foong

TED is using 1229
Ron
<[email protected]> wrote in message
news:X7lAe.2193$[email protected]..
> Hi ,
>
> May I know what ports need to be open at the firewall in order the
TED
> distribution to be working properly.
>
> I suspect it is firewall problem because the inventoried server which
> is install at the same segment with the TED distributor server, I manage
to
> push the policy and collect inventory data , but for those inventoried
> server which is install at the remote site, I fail to push the TED into
the
> server. At the TED distributor server, the log say that computer refused
> connection. And there is a firewall in between the TED distributor server
> and the remote inventoried server.
>
> Thank you.
>
>
> Steven Foong

What ports need to be opened for Podcasting?

To all,
I am a little lost. We have a server which is inside our firewall. What we're trying to do is to use this server as a test bed for podcasting. Our network admin is going to set it up so that it's behind the firewall but we can still access the content from home or anywhere. Now my question. The admin has asked us what ports need to be opened for podcasting. We have no idea. Is this something we need to setup on the server we are using or is there something else.
FYI - We are using a Windows NT server...I know, I know, I need to upgrade.
Any help is greatly appreciated. Thank you in advance.
zanm
Other OS windows NT server

Podcasting is not streaming on content, only downloading. It is basically a blog with an attachment in the RSS feed. Only port 80 (normal web port) needs to be able to go through the firewall.

What TCP/UDP ports need to be open for VPN Client version 4.8?

What TCP/UDP ports need to be open for Cisco VPN Client version 4.8 to work?
Thanks,

Normally, you need the following ports and protocol :
UDP 500
UDP 4500
ESP
In case, you are using IPSec over TCP you have to open, TCP port 10000 or any other port you want to use for IPSec connections (Its configurable).
-Kanishka

Thin JDBC through firewall - what ports need to be open?

We are running Oracle 7.3, and Oracle Web Server on the same
computer. The firewall is set up to allow connections to that
computer from anywhere, on ports 80 and 1521.
Our thin JDBC applet works perfectly from inside the firewall,
but from outside, I get a time-out error trying to open the JDBC
connection.
What else needs to be done get JDBC through? Do other ports need
to be open on the firewall?
The JDBC FAQ mentions a "Net8 compliant" or "SQLNet certified"
firewall - is that relevant to this problem, and if so, what does
it really mean?
We are supposed to be operational right now, so many many thanks
for any help on this!
- Joe Wielgosz
null

Try in the Lion Server Forum?
Regards,
Colin R.

What ports need to be open?

I'm setting up my fmis to deliver video through rtmp and http.
I'm on a locked down network.
What ports need to be open to allow people outside of the network to access the rtmp/http streams?
I am correct to say only port 80 and 1935?

Yes... 80 and 1935 is what you need for RTMP connections and proxied HTTP downloads. If you want to use RTMPS, you should also open 443.
If you want to be able to use the admin service and admin console, you'll also want to open 1111

What Ports need to be opened during Exchange migration?

Hi Team,
I am working on a Migration project (Ex2007 to Ex2013). Same forest same domain but are in different sites.
Please find the below details
AD Site1 - Ex2007 Servers
2 Mailbox Servers (CCR)
2 (HUB+CAS) in NLB
2 Domain Controllers
AD Site2 - Ex2013 Servers
2 Multi Role Servers (MB+CAS) with DAG
2 Domain Controllers
We have firewall in between data centers, could some one help me out what ports are need to opened on firewalls.
Thanks,
Balgates
Regards, Balgates

808 (TCP)
Mailbox Replication Service uses to communicate
53 (TCP)
DNS
135 (TCP)
RPC End Point
389 (TCP)
LDAP
3268
LDAP
1024 > (TCP)
if mailbox store is not statically configured then 1024 higher ports need to be open
88 (TCP)
Kerberos
445 (TCP)
Microsoft-DS Service
443 (TCP)
Mailbox Replication Proxy service uses port 443 to communicate with other Exchange 2010 client access server via HTTPS.

What ports need to be opened from apple's firewall?

I googled that qmaster uses port 10012 tcp&udp, but what ports need to be open for Qadministrator and Batch Monitor?
They didn't seem to work just with 10012.
Is there any documents about this from apple?
Idea of just leaving firewall off sounds like Microsoft in te 90s'.
And even they have made an interactive firewall that asks you to open a port when some application tries to use it.
Well, these fcp applications are sooo PRO...

On the Qmaster system prefs pane, turn on the "Show Qmaster status in menu bar" option in the advanced tab.
Then click the Qmaster icon on the menu bar, and it will show you all active Qmaster services, and their TCP port. You would need that port open. You need to do this on every computer on the cluster.
In your setup, are all the computers on the same subnet? Although you may be on a large network, you can rope off your systems into their own sub network, with a master firewall and avoid this type of problem. Each computer will have a different port, and that port will change every single time you start and stop the service. The TCP port will fall between 40000 and 65536 (the highest port ranges).
So, again I recommend protecting the network which will protect all the systems universally. But try setting the TCP ports listed on all the service nodes, and remember that those will change whenever you start and stop the service. (I'm not sure if the port will change after a reboot as well.)
Good luck

What ports need to be open in a version fios Actiontec MI424WR router to share Mac files os 10.7os

I need to share Mac Lion files over the internet through a Verizon FIOS Actiontec MI424WR router. I don't know which ports need to be open.

548 is AFP assuming you are sharing with another Mac

Does router telnet port need to be open?

We are a small office whose computers connect to the internet through a Netopia Cayman series router (ethernet). No IT guy ---it was set up by "that phone guy" several years ago who said the firewall was set up. can't find any written manuals at the moment.
when I got my new iMac I decided to check out the firewall at work from home. Port scan said that port 23-telnet was open. I telnetted to the ip address and guessed the login info on the third try (wasn't changed from what came with).
1. I know i need to change the password -- but do ieven need to have the port open? We have no need to access the office network from outside. And how do I close it? The firewall is operating in something called ClearSailing mode.
2. Because i don't have a manual, I am wandering around inside the router trying to figure out what all the terms mean without hurting anything. How do I determine whether port forwarding was ever activated?
3. I checked the log. Entries of the following types appear a lot. Do they indicate anything untoward has been happening?
at Nov 24 19:07:04 2007(UTC) L4 HTTP: "" host 218.59.122.81 logging out (timing out)
Sat Nov 24 19:07:34 2007(UTC) L4 HTTP: "" host 75.45.85.129 logging out (timing out)
Sat Nov 24 22:07:04 2007(UTC) L4 HTTP: "" host 75.45.85.129 logging out (timing out)
Tue Nov 27 20:09:58 2007(UTC) L4 e582 SNMP: incoming packet with unknown community: "public"
Tue Nov 27 20:10:01 2007(UTC) L4 e582 SNMP: incoming packet with unknown community: "public"
Tue Nov 27 20:46:18 2007(UTC) L4 e582 SNMP: incoming packet with unknown communi
and
un Oct 28 05:36:04 2007(UTC) L4 ICMP: Dest Unreachable Net Unreachable, LOCAL source xx.xx.xx.xx:2228 (TCP), original dest 85.195.157.234:5306
Sun Oct 28 23:48:56 2007(UTC) L4 ICMP: Dest Unreachable Port Unreachable, LOCAL source xx.xx.xx.xx:30885 (UDP), original dest 196.192.109.33:1026
Sun Oct 28 23:48:56 2007(UTC) L4 ICMP: Dest Unreachable Port Unreachable, LOCAL source xx.xx.xx.xx:30878 (UDP), original dest 196.192.109.26:1026
The xx.xx.xx.xx represents the office external ip address(you can log into the router at this address)
4. Where do i go to educate myself on some of this? ( Back to university is not the right answer )

Does the port need to be open? yes - otherwise you have no way of managing the router.
However, does it need to be open to anyone, anywhere? absolutely not.
The port should be open only to people on the internal network, and not accessible to random internet users.
Usually there is some option to configure that within the router, but you'd need the router documentation to be able to determine the specific commands. What you need to ensure is that you don't lock out the admin access altogether since then you'd be stuck.
As for the logs, it's hard to tell. The HTTP lines could indicate remote users accessing the router via HTTP (did you check whether the router has a HTTP interface, too?). Those IP addresses don't translate to known web sites, so it's unlike that they are outgoing connections. If they are incoming connections then you need to lock down the web access port in the same way as telnet, above.
The SNMP could be a problem, depending on where the request is coming from.
The chances are it's some automated probe looking for systems to compromise (in which case you should shut down SNMP as well as HTTP and telnet).
SNMP has valid uses, but if you're not using it right now you won't be missing anything by turning it off.
Finally, the 'Dest Unreachable' messages aren't likely to be a problem -since they're sourced from the router, that implies those were connections initiated from inside the network, but that were unable to reach their target. I think the other issues are of more concern.

Which Firewall Ports need to be opened FTP Authentication Problem

Ok, which ports need to be opened on the firewall to allow me to access another sites FTP. I opened 20-21, but still no dice. When I turn off my firewall, I can access them without a problem.
I figure it is some other port that is being used, but I have no idea what one.

Are you running apple default FTP service?
In SA you have al least 2 subnets to control in Firewall Service, one pointng to you LAN, the other (any) is for incoming connections.
Ftp service requires open ports on 20-21 , this is called passive mode restriction, if you have problems connecting you have to open also some higher ports (ex: 49152-65534) to enable non-passive mode.
Try to read /Library/FTPServer/Configuration/ftpaccess and look for a line like this :
passive ports youripnumber 49151 49155 (if not add it)
In Firewall > Settings > Service add ports 49151-49155 to allow only traffic by clicking the "+" button to add the ports. Save and restart Firewall.

Which ports need to be open for messages and facetime to work properly?

I noticed that Messages no longer works since upgrading to Yosemite on my work network. But it did when i was in Mavericks. Did they change something in Messages in the upgrade that would cause it to no longer work? ports?
I'm behind my work firewall, which ports need to be open for messages to work properly?

Just make sure your 9001 port is open.
Hope this works..
Hamid

Which TCP/UDP ports need to be opened on a firewall for adobe reader and flashplayer?

Which TCP/UDP ports need to be opened on a firewall for adobe reader and flashplaer to operate properly? This would include updating, linking, and any subset of features.

The Acrobat Family uses TCP HTTP/HTTPS for all traffic. The following processes and ports may be active on a Windows client machine:
AdobeARM.exe - automatic updates - port 443
AcroRd32.exe - brand messages - port 443
AcroRd32.exe - links in documents - anything specified in the URL
Acrobat.exe - brand messages - port 443
Acrobat.exe - links in documents - anything specified in the URL
AdobeCollabSync.exe - Tracker review data - port 443
The same ports are used by the program components on OS X.
There are no inbound listening ports for any elements of the Acrobat Family. Automatic updates are not pushed and there are no server processes within the software.

What ports need to be open on Fw for Waas Communication--Urgent

Hi All,
This product is new to need your help in configuring this. I am explaining the architecture below:-
We have a requirement to use WAVE-594-K9 Software Release 5.3.1 and in our Manila location and it will not talk to Waas central Manager in our client location instead client has installed one same model Wave-594 in PHX.
So now client has said it will only be used for caching contents and not for optimizing, they have some video training on web which will be passed through this wave and for making them highly/fastly available to agents they want to use this.
We have installed one Wave in Manila in application-accelerator mode and using PBR to redirect the desired traffic via Wave. As per our client Manila Wave will talk to PHX wave and PHX wave will get registered to Waas Manager in client network.
We have firewall between PHX wave & Manila wave, please let me know do we need to opened tcp/udp ports on FW for opening the communication between these two waves?
and what else i need to configure on Manila wave?
This is very urgent quick reply will be highly appreciated!!
Thanks!!
Bhisham

Thanks for the quick reply Kanwal!!
I checked with my team in PHX and we have Juniper FW in between these two Wave's, so what i understand from the links which you have shared.
In Manila Wave i need to configure that in Directed Mode and udp port 4050 needs to be opened bi-directionally on Juniper FW between IPs configured on wave devices.
In Manila we have 10.111.x.189 (Virtual-Blade IP) & 10.111.x.190 IPs & in PHX we 63.149.23.x & 63.149.23.x (VB) so from both IPs we required to open udp 4050 bi-directionally? Want to be sure before raising any request :-)
In PHX wave i am not sure whether we can configure that in directed mode and if it’s not then also it will work by opening port 4050 on FW Right?
In last our client was saying that Manila Wave will only be used as cache engine (VB is configured as content-engine) and it will download contents from PHX Wave (which is registered to CM at client side), what does it mean and do i need to do any special config on wave to achieve this?
I am very new to this device and lot of research on net confused me a lot, please don’t mind!!
Will wait for your reply then only i will raise request with FWteam.
Thanks,
Bhisham

Pixma MX922 drops off network, what ports need to be opened

Pixma MX922 keeps dropping from my wireless network - no matter what I do to configure. Called Canon support and they were not able to resolve issue (offered to replace printer, prefer not to do this - only as last resort).
I attempted ALL the standard items to resolve (re-install printer, drivers, make static IP (NO DHCP leasing - and my DHCP lease time on router is set to max. time of 2 weeks anyway...), made sure of no firewall issues, etc., etc.) but printer keeps doing this. Can ping the ip, etc., so I know that it exists, but UNLESS I POWER the printer OFF / ON - anything I sent to it will just sit in print queue. Once I power it off / on - all printing is fine - only for a few hours or next day - until it happens again...
Somewhere on this forum another user stated that he resolved the problem by contacting Canon support and they told him specific Ports on his router that had to be opened in order to fix the issue of the printer dropping off wireless network (* he must have had a better tech than the ones I spoke with...).
Does anyone on this forum know the ports that must be open on the router? Possibly one or two higher number ip ports such as 1020, or 25466, etc. ?
Thank you to anyone who may know this and provide.

Podcasting is not streaming on content, only downloading. It is basically a blog with an attachment in the RSS feed. Only port 80 (normal web port) needs to be able to go through the firewall.

HT203052 what incoming ports need to be open?

Similar Messages

Maybe you are looking for