HT203163 I am not able to access to iphone updates/store; as secure link to itunes store failed. I tried to turn firewall off, reinstall itunes and other troubleshoot options but none of them works.....

I am not able to access to iphone updates/store; it displays the message under diagnostics 'secure link to itunes store failed'.
I tried to turn firewall off, reinstall itunes and other troubleshoot options but none of them works......
Please help.

Update: I tried the "Toshiba Recovery Wizard" after everything else either fizzled out or hung up. After going all the way thru the recovery process (up to 100%), I finally got an error message.....it didn't work. And now, when I fire up the computer, I don't even get to that menu with the recovery options....the only thing I can boot into is the screens with the various ways to run your OS (in "safe mode", "safe mode with networking", etc).
I'm not a techie, but I'm guessing at this point, the part of my hard drive that got damaged in the fall was, at the very least, the partition with the recovery data. Couple that with the fact that this cheapo Toshiba laptop didn't even come with recovery disk (or ANY kind of disk, even basic installation software!), I'm screwed: I don't see any way to get a workable computer now without some kind of disk to boot from. So NOW my concern is more about spending the $$ for a new OS and THEN finding out the hard drive has other problems too...is broken in some other way to boot.
How to check this? As I said, I did run "chkdsk" back when I could get into the recovery menu and run the fix-it programs. It didn't note any problems. Thinking of taking this opportunity to upgrade to Windows 7 from Vista (which I never liked), but I have to know that the computer is otherwise ok....how to be sure?

Similar Messages

Every app on my ipod (2nd gen) which requires wifi connection doesn't work although the wifi mark is on. i did try restarting my ipod, resetting network setting, disconnect from wifi and reconnected it but non of them worked.

every app on my ipod (2nd gen) which requires wifi connection doesn't work although the wifi mark is on. i did try restarting my ipod, resetting network setting, disconnect from wifi and reconnected it but non of them worked.

This may sound silly but try your date a time setting my ipod had the same problem and i had even checked the the date and time went all the way to the apple store for help and the genius guy just rest the date and time and it worked just fine.

Error message:" Couldn't complete the command because the scratch disks are full" Ive try to fix this many times following different steps but none of them work and my disks equal to over 250GB. Please help.

. This error message pops up in Photoshop when i just wanna create a new plain white template. I have downloaded agentransack to track down the temp files and for some reason it says nothing matches the temp files.I have a couple of drives including 2 SSD's. I've try to fix this many times following different steps but none of them work and my disks equal to over 250GB. Please help. ( I am running windows 7 proffesional) 64 bit

Good day!
my disks equal to over 250GB.
What’s relevant is the space on the disk/s you have assigned as Scratch Disks – what are they (Phortoshop > Preferences > Performance > Scratch Disks)?
Regards,
Pfaffenbichler

I have a mac ox 10.5.8 and I'm trying to download a downloader that converts video files into mp3 but none of them wont open. Can anyone help?

I have a mac ox 10.5.8 and I'm trying to download a downloader that converts video files into mp3 but none of them wont open. Can anyone help?

http://software-download.name/video-to-mp3-converter-osx/
http://www.macworld.com/article/1161412/how_to_convert_audio_and_video_files_for _free.html
http://www.applemacvideo.com/howtoconvert/flvmac/flv-to-mp3-mac.html
http://www.iskysoft.com/convert-audio/convert-mpeg1-to-mp3-mac.html
Not sure if any are PPC, oR 10.5.8 compliant, still, if you give a link to one you're trying, it may be helpful.

HT201270 I have followed the instructions provided in this article but none of them worked. I even tried getting a new sim, still my phone network goes no service most of the time. There is no apple store in Philippines and I feel so helpless.

I live in the Philippines but my iPhone 4S was bought from Korea. There is no Apple store in my place and no one can help me fix my problem with my iPhone. I don't think Apple would replace my phone either despite the fact that it's still under warranty.
My phone would normally go on "No Service" status since I updated to iOS 5.1, so I am not able to make/receive phone calls/messages most of the time. It's really frustrating especially because my iPhone is just 3 months old.
Can anyone help me with my problem?
- I have restored my iPhone's OS and didn't do any back up
- Did reset network, reset all settings, among other resets available in my phone
- Used a new sim card from my network provider
- Used sim card from other network provider (since my phone is factory unlocked)
All the abovementioned didn't work and I'm getting really frustrated.I never had this problem when I was using iPhone 4.
Help me, please.

Sounds like it's hardware issue. The iPhone warranty is based in the original country of purchase. Since it was bought in Korea you will need to ship the phone to someone you know in Korea to be taken in and then they will have to ship it back to you. The cost of shipping will be at your expense.

Forgotten Apple ID and rescue email address, so I am not able to access my iPhone.

Hi.
I forgot my Apple ID and rescue email assigned to it. Now I am not to access it. Help me please

https://iforgot.apple.com/appleid

How do I block adds served by Primawega?? I have added 3 popup blockers but none of them work! Running Windows 7...

Adds keep popping up from primawega and none of the popup blockers I've used have works. I'm running Windows 7
== This happened ==
Every time Firefox opened
== When I updated to Windows 7

Here is a mix of solutions from different sources:
Tools->Add-ons->Extensions->Loudmo (or anything strange, suspicious, unknown, etc.)
Disable them or even uninstall them. Restart Firefox.
Quote:
"I deleted those over a week ago and everything has been running fine since. Check your add-on programs in Firefox."
Quote:
"In the Mozilla Components directory [C:\Program Files\Mozilla Firefox\components], I found a library called wry-NhK-.dll, which got created/modified around the same time the problems started. Since I renamed the file, the popups stopped."
Look out in
C:\Program Files\Mozilla Firefox\components
for *.dll file which was created/modified at another date than all other files around.
Quote:
"In profile directory [application data/mozilla/firefox/profiles/xxxxxxxx.default/extensions], there should be a number of directories that look like: . If you look under/inside those, one will have a components directory. There a conspicuous dll [-zfdgl.dll] will reside. Delete/rename that...
But you aren't done. Now in your registry, HKEY_CURRENT_USER/Software/AppDataLow there will be another conspicously named hive with a number of binary, hex and such entries. While I don't condone deleting anything in your registry, in this case, it was so obvious that it wasn't part of the normal computer, I delete the hive entry (NOT appdatalow) and viola, problem gone... "
Comment: In my registry, in HKEY_CURRENT_USER/Software/AppDataLow I see only empty AVG folder (while I have just recently uninstalled AVG). So I suppose that deleting a hive of keys in this directory (if you have any keys in this directory) is relatively safe. But, just in case, you can backup it before deleting:
right-click AppDataLow
click Export
save the backup of this one registry folder somewhere
I hope you have some anti-malware program. Just in case primawega is a malware.

Have tried all the different methods to clear cache, but none of them work.

I don't know what other information to supply. The above question sums the problem up fully. The cache simply will not clear/empty.

Hi John,
Thanks for your reply.
Yes, I have followed the instructions under How to clear the cache, as well as those under Clear Recent History. Options - Advanced - Network - Offline Storage - Clear Now. In addition, my settings specify to clear cache upon closing Firefox. Nothing is working at this point (and hasn't for months, although it used to a long time ago).
I don't know about this 'about:cache' thing. That just gets me to a general google search page.
As far as your questions:
I want to clear the cache to get rid of older links (and get fresh links) at the farmtowngifts.com site. So it's not a major problem, as I could simply quit using Firefox when I have exhausted all current links there, and use a different browser. I don't use Firefox for anything else anyway.
Kristina

I downloaded iTunes 10.7 for my PC but it won't open. I've tried everything I could find but none of them worked. What do I do?

I have downloaded iTunes 10.7 but everytime I try to open it, all my computer does is pretend like it's loading but then does nothing. I have looked everywhere to find a way to fix it but nothing I've done has worked and it's really starting to bother me. How do I make iTunes open?

everytime I try to open it, all my computer does is pretend like it's loading but then does nothing.
Can you check something for me please?
Restart your PC. after the PC restarts, bring up your Task manager, and go to the "Processes" tab. Click "Image name" to sort the processes alphabetically.
Now try to launch iTunes.
Does an itunes.exe process appear? If so, does it vanish after a second or so, or does it persist in the Processes tab (even though iTunes itself never shows up)?

My Ipod touch wont turn on. I tried to hold down the home button and the power button, but that didn't work. Any other suggestions?

My Ipod touch won't turn on. I tried holding down the home button and the power button. Any suggestions?

I had the same problem a few weeks ago, I tried pressing and holding the Sleep/Wake button and the Home button at the same time
After about 5 seconds, it seem to start up again
If all else fails, have you tried to take it in to the apple store? The customer service there is always really friendly and helpful
... just don't panic, I'm sure it will be fine

HT1379 A flashing question mark appears when I re/start my MacBook Air 2013. At first, I pressed Power & Option button and it recovered from Internet. Then, four options appeared but none of them are helpful. Could u please help me to solve it asap?

Hello,
A flashing question mark appears when I re/start my MacBook Air 2013. Then, I pressed POWER & OPTOIN buttons and internet options appeared for internet recovery. After internet recovery, the OS X utilities appears with four options (Restore from Time machine, Reinstall OS X, Get help online and Disk utility). But none of them seemed helpful. On the last option Disk utility, the icon created only with 33KB and other disk 1 Mac Os X Base system. On First Aid, the icon Repair disk is disabled. So I could not click on repair disk. Could you please suggest me how to solve this problem asap? Thank you so much for your help in advance!

You can try the following:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Very URGENT:am not able to log in to my account on installation of OSX lion...tried to resolve this issue by calling apple support centre ,but was left in vain...am not able to access my documents nor do any work...plz help me resolve this issue asap...

am not able to log in to my user account after installation of OSXLion,have called up the support centre many times,but was left in vain ...i belief its a simple problem ,but why is apple support center not able to help me out ...have given them all the required information with respect to everything...somebody plz help me to log in as am not able to access my docs and do any work...

My phone works all fine when am in mumbai but as soon s i leave mumbai I am not able to make an otgoing call
This is entirely a carrier issue. If your carrier (airtel) doesn't provide service outside of Mumbia, this has nothing to do with your iPhone.
i feel i need to change my brand
This is a user-to-user tech support forum, not Apple. No one here cares at all about your threats.
NEVER post personal info in this public forum

I'm not able to access goolge docs with the blackberry browser (it worked fine till a few weeks ago)

I'm not able to access google docs with the blackberry browser (it worked fine till a few weeks ago)
seems that this issue happens to a lot of people
is google going head to head with Blackberry ? or is this just a bug ?
Message Edited by avolcoff on 08-27-2009 01:06 AM

Welcme to the cmmunity supprt frums
Nurse-Berry
Follow NurseBerry08 on Twitter

User has appropriate permission, still not able to access one of the sharepoint site applications.

Hi,
I have tried all solutions available on internet regarding this problem but none seems to work.
As per one solution I added the user in sharepoint site collection administrator group still no luck!
As per another solution I tried to run “User Profile Service Application Proxy – User Profile to SharePoint Full Synchronization”
“User Profile Service Application Proxy – User Profile to SharePoint Quick Synchronization”
but they dont run for some reason. Both these jobs are scheduled to run everyday but last time they ran was some date in 2011. When I click on Run Now nothing happens.
I deleted all cache, forms password history everything. Added the site in trusted sites and all. No luck!
User also tried to access the site by logging onto another system but still same issue.
This user recently joined alongwith a few more people. All of them are able to access the site except this particular user. So, a web part or unpublished page cant be the reason, right?
This user is only able to access the home page which is say http://<siteurl:1234> application while the site which this user is not able to access is
http://<siteurl:2345>.
I even tried to give access through sharepoint designer but no luck! Please help!
PS: This may not be relevant but still I'm sharing. Earlier I used to add users in manage user profiles - new profile. But now as soon as the user is added into active directory there profile is getting created automatically. This might be happening due to
active directory and user profile sync but the question is how? Because I dont remember configuring this. And it was not configured earlier too.

Hi,
According to your description, my understanding is that only one user cannot access the site even though he has the right permission.
I recommend to verify the things below:
Check the permission of the user in the site to see if the permission is right.
Is http://<siteurl:2345> a new site collection ? Can the user access other pages except the home page in
http://<siteurl:1234>?
Grant needed permission to the user in the web application to see if the issue still occurs.
Delete the user and re-add the user in AD to see if the issue still occurs.
Check the ULS log for detailed error message.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Not able to access human task form (11.1.1.4)

I installed SOA Suite with BPM Suite 11.1.1.4. I ran into quite a few issues. The biggest one is I am not able to access the human task form in BPM workspace even for the new application created in 11.1.14.
Do you have such issue? I am not sure if it is a bug or is related to my specific installation. I followed the document “Quick Start Guide for Oracle® SOA Suite 11gR1 (11.1.1.4.0) Version 1.6” for the installation. The only difference is that I installed the generic version of WebLogic and JDev and configured them to use JDK 64-bit version since my OS is windows 7 (64-bit). Before, I had installed 11.1.1.3 with 64-bit and it was working fine. The only tool installed with 32-bit is the JDev 11.1.1.3. Since JDev 11.1.1.4 is supporting 64-bit, I installed everything with 64-bit for this time.
The details of the error are the following:
With JDev 11.1.1.4, I created a new application which has a simple BPM process with 3 flow objects: start event-user activity-end event. The human task has the auto-generated task form. I deployed the application to the SOA server.
When testing the application, the task was created and listed in the BPM workspace. But when I clicked the task link to open the task form, the web page was hanging. I noticed the following log was REPEATED again and again in the access.log:
140.98.125.168 - - [20/Apr/2011:10:28:08 -0400] "GET /workflow/TestpsUI/faces/adf.task-flow?bpmWorklistTaskId=2a5b4ad1-823f-4615-8a7e-c5449a7be814&bpmWorklistContext=12aa4934-991a-487c-b7f3-5159808c399a%3B%3BtbcZXSd1E1LVZv8OIaLZGd21meLUMNkYSMsmz60kNKoEaJ1N53wy3zyRYA%2BunyKF9UNi50fPHKtaXY6IqKbh%2Fu68WebTan3zCwGsUNmNMaw8aLEygS5qb2cOGx2qGal86F%2FgiRka874PYLXhohFdDPCQyoxre2p7IgpsloLHq2rh7T3zWGnyOjLdC7Qw0Geb20Kfp8XA2UUIoxaxTHS6YFPQqqs%2FzIkyEsgMNQJMDbYYGdceRL2sT8rMkBXpmQ0r&bpmWorklistHttpURL=http%3A%2F%2Flocalhost%3A7001%2Fbpm%2Fworkspace%2Ffaces&bpmWorklistHome=home.jspx&bpmWorklistReassign=reassignTask.jspx&bpmWorklistRoute=routeTask.jspx&bpmWorklistRequestInfo=requestInfo.jspx&bpmWorklistSecurity=signTask.jspx&tz=America%2FNew_York&lg=en&cy=US&vr=&dispNameLg=en&dispNameCy=US&dispNameVr=&df=medium&dt=both&tf=short&bpmWorklistSessionTimeoutInterval=900&soaUrl=http%3A%2F%2F140.98.125.168%3A7001&bpmBrowserWindowStatus=taskFlowReturn&adf.tfDoc=%2FWEB-INF%2FHumantask_TaskFlow.xml&adf.tfId=Humantask_TaskFlow&_task-flow-return=http%3A%2F%2Flocalhost%3A7001%2Fbpm%2Fworkspace%2Ffaces%2Fadf.task-flow-return%3F_adf.ctrl-state%3De1i6yi1gq_35&_adf.winId=e1i6yi1gq_26&_afrLoop=7156779026094&_afrWindowMode=0&_afrWindowId=null HTTP/1.1" 200 5478
Please help if you know what is going on for the issue.
Thanks a lot,
Helen

Go to OEM, select the SOA Composite application you deployed.
Under Component Metrics … click the link of the Human Workflow Component that you have the issue
The settings of the Human Workflow Component would be displayed
Click the Administration tab, you will get the URI setting for the human task
update the Host name etc. as you want and click "OK" then click "Apply"
Please note: this is just a shortcut for my own dev-env. I have not got the time to figure out why this happens. It is sure not the right solution for the production if we have the issue in the prod-env, I think.

HT203163 I am not able to access to iphone updates/store; as secure link to itunes store failed. I tried to turn firewall off, reinstall itunes and other troubleshoot options but none of them works.....

Similar Messages

Maybe you are looking for