HT203175 I have attempted to sync my new iPod touch 4th gen. with my current PC running Windows XP and everytime I attempt it I get the dreaded blue screen, here are the error codes- 0x0000007E; 0XC00000005; 0X00000000; 0XBA51B7C8; 0XBA51B4C4 any suggesti
I have attempted to sync my new iPod touch 4th gen. with my current PC running Windows XP and everytime I attempt it I get the dreaded blue screen, here are the error codes- 0x0000007E; 0XC00000005; 0X00000000; 0XBA51B7C8; 0XBA51B4C4 any suggestions?
In the course of your troubleshooting to date, have you worked through the following document?
iPhone, iPad, or iPod touch: Windows displays a blue screen message or restarts when connecting your device
Similar Messages
-
My new ipod touch 4th gen with ios 6 wont play soun in the headphones, but only through the speaker when my head phones are unplugged
- You do have the volume set all the way up?
- Have you tried another pair of headphones/do the headphone work in other devices?
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the headphone plug a dozen times or so.
Try the following to rule out a software problem:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
Make an appointment at the Genius Bar of an Apple store. It seems yo have a hardware problem, likely a bad headphone jack.
Apple Retail Store - Genius Bar -
My new ipod touch 4g that i just got is running extremely slow and the apps crash alot. I have about 10gb left out of 16 gb. When i got it, it was brand new, and ran like how it is now. I was just wondering if this could be some sort of defect?
My new ipod touch 4g that i just got is running extremely slow and the apps crash alot. I have about 10gb left out of 16 gb. When i got it, it was brand new, and ran like how it is now. I was just wondering if this could be some sort of defect?
-
My new ipod touch 4th gen has a much lower volume than my old one, i have maxed the volumes out and got rid of all volume limits which has nor helped. Can anyone help?
Are you using the same headphones?
Did you officially purchase the in an EU country? They require a lower max volume than the USA and other countries. -
My brand new ipod touch 4th gen wont let me sync new songs to it
I just got my new ipod touch 4th gen 2 days ago and it wont let me sync any new songs to it and it wont let me take any songs off it either. Ive tried rebooting it and restoring it serveral times and nothing seems to work. Also I updates my itunes and still nothing. HELP
What specific attributes (resolution, frame rate, bit-rate, audio forma etc.),do the mp4 videos have? There are many variations in the mp4 format. Have you tried using the Create iPod and iPhone version in the Advanced tab of iTunes?
-
Hello I have just purchased a 2nd hand Ipod touch 4th Gen, I cannot seem to delete the Apple ID in the message settings of the previous owner?
Go to Settings>General>Reset>Erase all Content and Settings. Then setup the iPod with your account.
If necessary, place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software -
i have got a ipod touch 4th gen and i have got minecraft pocket edition on it but i and getting a new ipod touch 4th gen and i would like to know how to get minecraft back on my new iPod touch with all my data on it??? please help
See:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device -
New iPod Touch 4th gen. cannot connect to home wi-fi network
When I launch wi-fi on my new iPod Touch 4th gen. my home network's name is displayed, but after entering my password the iPod is unable to connect - the wheel to the left of the network name just keeps spinning. The network still functions properly for all my other devices (MacBook, 2nd gen. iPod Touch, wireless printer and my wife's PC) and the new iPod Touch did connect to the network in the Apple Store when I visited yesterday. I know the password I enetered for my home network is correct because I've checked it in my keychain, and also the iPod did not inform me that it was the wrong password for that network - as it does if I enter another password.
I have followed the advice given to others - unplugging the Time Capsule and leaving it for 5 minutes, checking that all my software and firmware is up to date, 'forgetting' the network on my new iPod then searching for it again, and have completely restored the iPod - but it still cannot connect to my network. If my network is functioning properly, and my new iPod was capable of joining the Apple Store's network yesterday, and I am sure that I am entering the correct password, it seems to me that my problem must be due to some network setting that is refusing to allow a new device to connect. I can't find where that setting might be - can anyone advise?depending on what router but hopefully all routers came to this default address....
192.168.1.1/Wireless_MAC.asp
from
>Setup of the Basic Setup you goto
>Wireless
>WirelessMacFilter
also had an idea when i wanna make sure im typing the right one, i would do is tap each letter/# by 1, as in,
(e.q.)
here's my ipod 4 and my ipod 2, the pswd is 123456
ipod 4, i press 1
ipod 2, i press 1
ipod 4, i press 2
ipod 2, i press 2
and so on till i reach both of them to 6 (1by1) to make sure i get it in there right. saw this on another wall it might depends on what channel your using, but i dont rly think that matters bc i have mine on auto and nvr had a problem.
i would do this even thou it may sound crazy to others....if i were you this is what i would do
on your ipod 2Gen
>Safari
>address to 192.168.1.1/WL_WPATable.asp
-(wireless security settings for passcode)
>tap the box for the password, whatever ur security is i would copy
-IF WEP
-copy phrase key and Key 1
-IF WPA
-copy phrase key
>open Notepad
>under iCloud account Notepad
>Paste the Key
>either on your pc/mac or your 2nd Gen, go back to
>192.168.1.1/WL_WPATable.asp
>change your Security Mode to Disable
>goto your 4 Gen iPod Touch
>goto settings and connect to it, if pswd is still in it then tap forget this network and reconnect to it
-once connected and got IP adresses
>goto Notpad under iCloud
-you should have obtained your recent icloud msgs included the key you pasted
-once obtained
>gobk to pc/mac or ipod 2nd gen and re enabled the security and re-paste the key in
-once router adjusted try to connect to it
>1st do your 2nd gen and forget this network reconnect to it and repaste the key
>2nd goto ur 4rth gen from your notes, highlight the key in ur notpad and tap copy and forget this network reconnect to it and paste the key.
this should work bc i did it myself when i couldnt get connected bc thats almost the same steps i did.
somtimes i put my name up on here. remeber these names we put as our nickname doesnt mean its our real name or anything like that,
~Anthony -
I have a few scratches on my iPod touch 4th gen screen and it really bothers me and I need a way to fix it without replacing the screen or causing further damage
Hey Pandorafromtn, Not to rub salt in you open wounds, but prevention would have cost less than $10! Anything that will remove the scratches will most likely ruin the screen. I am aware of a product that works well for fill scratches in eyeglasses. It paints on, is kind of milky semi-transparent then drys to a haze. You then rub / polish until clear. Will it damage the coating on an iPod screen? I don't know. But may be for not, I can't remember the name of the stuff. I guess contact a eye care center, they may be able to help. Replacing the screen would be the best option you have or learn to live with it. In the future use a case and/or screen protector. Or you could start working on your incantations, "Oculus Repairus!" Don't forget the flick of the wrist to get your wand in the correct angle as you state "Repairus". All joking aside, Good luck. Cheers.
-
im going to restore my ipod touch(4th gen) to factory settings. my question is, how do i back up all notes from the app "notes" so they can be reinstalled? or is it allready backed up as per the main "back-up" ? I know its a simple question, but i dont know the answer. please help.
The iPod backup that iTunes makes includes Notes.and other app data. However, it does not included synced media like apps and music.
Thus, just restore from backup with all your synced media in your iTunes library.
iTunes: About iOS backups -
I have a USB cable for my iPod touch 4th gen. I have tried almost everything to make my windows computer find my iPod touch but its not finding it. Any help on this issue?
If not successful:
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Try another USB port and cable
Try another computer to help determine if you have an iPod or computer problem -
My new ipod touch 4th gen wont show up on itunes nor in my computer
my new ipod touch 4th gen wont show up on itunes nor in my computer
http://support.apple.com/kb/TS1538
-
I have turned iCloud off on my iPod touch 4th gen iOS 5.1.1 but I don't know how to turn it back on???
Go to Settings > iCloud and activate it
-
hello, i have an iBook G4 which is old, it has an OS of 10.4.11 which is called tiger i think, forgive me im new to apple,
it has a version of itunes installed (9.2) which worked fine with my 1st gen ipod touch but ive upgraded to a 4th gen ipod touch and now my itunes version is no longer compatible, the problem is that because my os is out of date i cant install the current version of itunes so i think i need to upgrade my OS.
Like i say im quite new to apple so any help or information would be greatly appreciated. thank youAs Niel has suggested Mac OS X 10.5 Lepaord.
But first of all make sure that your iBook is above 800Mhz and you have at least 512 Meg of memory. (1 GB recommended)
Please note, that if you do install Mac OS X 10.5 on your iBook, it will not allow you to install the latest version of iTunes version 11. The most recent version of iTunes that can be installed would be 10.5, which will be compatible with your iPod touch 4th gen, provided it's not been updated to iOS 6.
Sadly you can't install any version of Mac OS X above 10.5 Leopard, as it they requires an Intel processor, which your iBook G4 does not have.
Hope this helps. -
i bought a ipod touch 4th generation with cracked screen and i finally got it to turn on itunes and the ipod was making charging noises but the screen was just white i tryed updating it to ios 5.1.1 bit did nothink so i was wondering how to fix this white screen i tryed a hard reboot ( whitch i heard might work ) but did nothink if there is no sulution to fixing this is it worth buying a new screen ? thaanks
Try here:
iOS: Not responding or does not turn on
If yu can't turn it off, then let the battery fully drain. After charging for at least an hour try again.
If still not successful that indicates a hardware problem and service is required.
Maybe you are looking for
-
Compare Table Data on 2 different databases having same schema
I need to compare data in all the tables in 2 different databases having same schema. If there is any difference in data in any table on Database1 and Database2 then I need to update/insert/delete the rows in my table in Database2. So Database1 is my
-
After restoring iPod Touch to factory settings it's still connected to my account...?
I am going to sell my iPod Touch 5th Gen so I went on my laptop and restored it to factory default. I've done this before and it disconnected an iPod Nano from my account and I was able to sell it, but this time I got a message on my laptop saying "T
-
Open GL pipeline : Text are not displayed in JComponent
Hello I have a problem: Using the opengl pipeline (-Dsun.java2d.opengl=True) on a very simple program which display a frame by screen device (two screens) with a JButton, i have the following effect: Using JRE 1.6_03 the button's text are displayed U
-
I'm running WL 6.1 SP2 and Cocoon 2. I can get Cocoon to work under the mydomain\applications\cocoon directory. But I'm having big problems when I try to get Cocoon to run from inside my application's .EAR file. The prob
-
using linux 5.7 (32bit) and oracle 11g relase 2 SQL> select name,value from v$diag_info; NAME VALUE Diag Enabled TRUE ADR Base /home/oracle/u01/app/oracle ADR Home /home/oracle/u01/app/oracle/diag/rdbms/looking4/looking4 NAME VALUE Diag Trace /home/o