HT203175 Reloaded Itunes on an XP machine. Reloaded because Itunes would not open. Now when I play a movie that is in my library, The movie plays for aprx. 60 seconds and then reverts back to my Itunes library. Any ideas on a cure?
Reloaded Itunes on an XP machine. Reloaded because Itunes would not open. Now when I play a movie that is in my library, the movie plays for aprx. 60 seconds and then reverts back to my Itunes library. Does it with all movies in the library, Most where downloaded from Itunes. Any ideas on a cure?
This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2
Similar Messages
-
My iphone 4 locked up for several hours. i then tried to reset by holding down the home button and power button at the same time for 10 seconds and then the home button for 10 seconds. it is now completely black. what do i do? couldnt restore it in iTunes. Has anyone had this problem? Help!
Same thing happened to me today. I wasn't even using the phone for the past 6 hours and suddenly I can't connect to the internet, none of my internet apps would work - nothing. I tried to call AT&T from the iphone and it locked up - couldn't turn it off, change to the home screen - nada - brick.
Did the Home/Power button thing and that worked but this I've only had this phone for about 4 weeks and it's locked up more times than my 3GS did the whole two years I had it! Ridiculous -
Volume cuts out for split second and then comes back very low
I have an old Ipod Classic that I listen to on my Bose docking station. Every now and then the sound cuts out for a split second and then continues playing only it's too low to really hear so I have to turn the volume back up.
It did this twice today when I was listening to.
It was doing this every now and then a few months back and then stopped.
Has anyone had this problem and know what could be causing it to happen?* Bugcheck Analysis *
BAD_POOL_HEADER (19)
The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
The internal pool links must be walked to figure out a possible cause of
the problem, and then special pool applied to the suspect tags or the driver
verifier to a suspect driver.
Arguments:
Arg1: 0000000000000020, a pool block header size is corrupt.
Arg2: fffffa802224f9e0, The pool entry we were looking for within the page.
Arg3: fffffa802224fa50, The next pool entry.
Arg4: 0000000004070006, (reserved)
Debugging Details:
TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
BUGCHECK_STR: 0x19_20
POOL_ADDRESS: GetPointerFromAddress: unable to read from fffff800036ca100
GetUlongFromAddress: unable to read from fffff800036ca1c0
fffffa802224f9e0 Nonpaged pool
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: chrome.exe
++++++++++++++++++===============================++++++++++++++++++++++==========4
* Bugcheck Analysis *
VIDEO_TDR_TIMEOUT_DETECTED (117)
The display driver failed to respond in timely fashion.
(This code can never be used for real bugcheck).
Arguments:
Arg1: fffffa80262bc4e0, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff8800fa2be20, The pointer into responsible device driver module (e.g owner tag).
Arg3: 0000000000000000, The secondary driver specific bucketing key.
Arg4: 0000000000000000, Optional internal context dependent data.
Debugging Details:
TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
FAULTING_IP:
nvlddmkm+153e20
fffff880`0fa2be20 ?? ??? -
unable to stay in full screen since upgrade
Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine -
Running Windows XP. This does not happen when I use Internet Explorer.
Thank you for the information and the response. We will be upgrading to the full version of Creative Cloud to publish our single .folio.
I do want to remark on the issues created by Adobe's inconsistent explanation of how DPS can be used with the Creative Cloud. After reading that FAQ, I also spoke with an "Adobe Agent" through the chat system that pops up on various product pages and asked the agent as specifically as I could if the Single-app version of Creative Cloud would allow me to publish single .folios through DPS. In no uncertain terms the agent said the Single-app version would be fine, and referred me to the order page to begin the order process.
I spoke with another agent over chat in the morning on Saturday and they also said I should be able to publish single .folios with the Singe-app subscription to Creative Cloud. When I presented my App Activation problem to the agent, the agent said I should just wait 24-48 hours for my subscription to Creative Cloud to process so I could create my app.
This has been a very vexing process that has cost my team valuable app review time. If I had not encountered the FAQ and two agents who specifically told me that I could use the Single-app version of Creative Cloud to publish my .folio, I would have been happy to go straight to purchasing the full version of Creative Cloud.
Thanks again for the assistance. -
After I edit a raw file in Lightroom 5 and with raw 8.5, the edited files revert back to being unedited. Any ideas?
bigjb3 wrote:
I edit them in Lightroom. Then the little symbol appears in the bottom of the thumbnail in the film strip at the bottom of the LR screen. Then, a few minutes later, the symbol is gone. I then click on one or more of the thumbnails and the image opens in the main screen. However, all of the sliders on the right are at their defaults, and the image is back in its unedited state. Last night, for a while, the edits reappeared, but tonight they were gone again. I just recently downloaded Camera Raw 8.5. I wonder if that is the problem.
What little symbol? Do you mean the up-arrow symbol that appears top-right of grid or film strip images? This indicates that the image has been edited by another program.
Or do you mean the "+/-" symbol that appears bottom right?. This appears after editing, but if it disappears subsequently without you doing anything, it sounds like something nasty is happening to the catalogue or image xmp file on disk.
Lightroom doesn't use ACR (8.5 or any other version) - it has the same functions built-in. ACR is used only by Photoshop. Are you opening the images in ACR in Photoshop? -
I followed the instructions given to turn my automatic download icon in my iphone 3 and still goes back to off position. Any idea how to fix this issue without getting a new one?
Something may have gone amiss on your iPhone.
To attempt to correct this follow these steps:
Backup your iPhone using iTunes or iCloud.
Use iTunes to completely restore your iPhone as Factory new.
Monitor battery usage to see if it is normal. If not, you may have a hardware problem - if so, contact Apple support.
Restore your iPhone from your backup above.
Check battery usage to confirm that it is still normal. -
I am running Lion 10.7.5, Adobe Photoshop CS6, scanning slides on my Epson V600 and can no longer use the scan application or the plug in for Photoshop. Should I revert back to leopard in my time machine to finish scanning my family slides?
In 10.7 there is not a twain that works with Photoshop for importing with all the options needed to scan transparencies. I noticed that when I was scanning in October 2012 I was still using CS6 so somehow I was managing to be able to use all the scan features.
They sell 2nd party software (VieScan and Silverscript)which I found to be just mimially OK and very hard to use.
I just want to scan like I used to.
Can I use time machine to go back to an earlier operating sysytem LEOPARD, and then do my scans and then save the photos and them go back to the LION system?
I spent 7 hours trying crazy solutions - downloading Windows CS2 Photoshop and then using a program so I could run it on the apple. Then I couldn't figure out how to put a plug in for the scanner in the stupid windows Photoshop program. Googgling the computer like a mad woman trying to ask questions. I am not giving up...
Please help if you can...
Thanks...I assume you've tried using Image Capture. Give VueScan a try.
http://www.hamrick.com -
My iPhone 4S has decide to stop playing any of my music. All my songs are there, but when I click to play, it just scrolls through a bunch of songs and then reverts back to the play list. Anyone have any suggestions as to how to correct this? Thanks.
I am having the same issue. And today, I noticed that when I was talking on the phone, the volume went down low. I had to reboot the phone, so that the volume was up again. Mostly, though, it's my music that I am having issues with.
Same issue as listed above. iPhone 4S. IOS6. -
Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.
I've tried my best to troubleshoot. . . opening in safe mode nothing seems to work.
In the problem report, this is the error that stood out:
Crashed Thread: 8 Dispatch queue: com.apple.iad.iadidmanager
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000090Hi there navicin79,
You may find the troubleshooting steps in the articles below helpful. The first thing I would try is reinstalling iTunes as outlined in the first article.
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/ht2311
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
-Griff W. -
my iPod touch 5th generation had white screened an it won't let me rest it by holding down the home button an the power button for ten seconds I've pulled it in to iTunes an its not being detected what can i do as its starting to over heat?
If you can't get it to shut down or restart when holding down the Home and Sleep/Wake buttons and you can't get it recognized in iTunes to restore it, the iPod may have suffered a hardware failure and will need to go to Apple for service. Someone else here may have additional suggestions, though.
There is no "fifth generation" iPod touch, by the way, just for the sake of clarity; not yet, anyway.
Regards. -
My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected. We have tried holding the power and home button at the same time for several seconds, and the screen still stays black. Thanks!
Hello skdog I possibly think your ipod touch is black because it has not charged. If your dock is broken it might just mean the dock will be broken and so might be the USB port. You should see an Apple shop nearby and hand it over and see what they can do. I hope this information works!
-
I rented a movie in the iTunes Store but now when I want to watch it it says; 'cannot load the movie' while it says the download has been completed.. What now? I already payed for it.
Did you rent the movie on your iPad? Are you trying to watch it on your iPad?
Do you have WiFi connectivity when trying to start viewing the movie?
You should have answered "yes" to all the above. If not, that is probably the source of your issue. -
When I open Iphoto, I see all my photos for a second and then they disappear and only a white dotted box appears. Then I click on it and for photos is a triangle with an exclamation point. It doesn't happen to all but quite a lot. how to I get them back
Have you recently deleted photos using the finder or run clean up software? Is so restore your backup
If not the backup your iPhoto Library and launch iPhoto while depressing the option and command keys. Rebuild your database
LN -
I have used Final Cut Pro 7 for about a year. Two weeks ago when I tried to open it, it opened for 15 seconds and then the icon disappeared. I have tried to reinstall and it didnt help. any one has similar case or can help?
Please post your problem in the Final Cut Studio (Final Cut Pro 7) forum:
https://discussions.apple.com/community/professional_applications/final_cut_stud io?view=discussions
You'll get the help you need in that forum.
Maybe you are looking for
-
ERROR: could not serialize access due to concurrent update
Hi. I use ejb+glassfish+postgres in my project. The project is a web application for finansial data transfering. I have three DBs, long global transactions, serializable isolation level, container-managed transaction. When i test the project with con
-
Can I put a subquery in the where clause, on the left side on the operator? This is a multi-row query. Like this, select a.col1, a.col2, b.col1, b.col2, my_function(a.date1, b.date2) AS GROSSDAYS from table1 a where ( select ( a
-
pl. answer this Which clause excludes the group function? a. WHERE b. FROM c. HAVING d. GROUP BY e. ORDER BY
-
Built-in iSight not recognized by Skype!?!?!
Bah. Just got this macbook. Running Leopard 10.5.1, etc. but Skype won't recognize my camera. Photobooth works just fine and I can see it under my system profiler. What gives?!?!
-
Adding replication to an existing database.
I am looking at adding replication to an existing database. This database has lots of existing containers many of them are 1G in size. How will this be handled when the master and client initially start? Will the master just start sending to the clie