HT204266 Hi pls support me how to switch my store to Saudi Arabian store? By mistake my store is switched to USA store so now I'm unable use my apple id, pls help me

Hi pls support me how to switch one store to another store? Because my store is Saudi Arabian store but mistakenly now it is switched to USA store
So now I'm unable to use my apple id, pls help me

Settings / iTunes & App Stores, tap on your AppleID, then Account / Country-Region.

Similar Messages

HT5622 I had an iPhone 4S, I recently upgraded to a 5s and have been using it since early December. I kept my same Apple ID . I gave my 4s away, the person set up their own Apple ID for the 4s however now I can't use my Apple ID in my 5s. Any help please

I had an iPhone 4S, I recently upgraded to a 5s and have been using it since early December. I kept my same Apple ID . I gave my 4s away, the person set up their own Apple ID for the 4s however now I can't use my Apple ID in my 5s. Any help please

There could be many causes. What happens when you try to use it. also try adding it again.

How to switch from USA apple store to Egypt store

I accidentally switched from Egypt apple store store to USA apple store. Now if I try to download any app.i got the message saying you must switch back from USA apple store to Egypt apple store,! How do I do that?

Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region...change here.

I updated my IPAD 's IOS last night ...I have NEVER used a passcode for my IPAD & it is asking for it...How am I supposed to put in the passcode that I NEVER used? now I cannot even use my IPAD...HELP!!

I updated my Ipad( ios 7.1) & now it is asking for my PASSCODE ...I NEVER used a PASSCODE ,so now I am unable to use my IPAD because I DO NOT or NEVER have used a passcode ..my IPAD is useless ..I am locked out because I have NO passcode to use! HELP!!!

I have seen other users talk about this and make the same claim. Unfortunately, even if you didn't set a passcode, and the iPad is insisting that you did, unless you can successfully guess what the passcode is, you still have to follow these instructions and use one of the methods in here in order to restore your iPad which will then unlock it.
iOS: Forgotten passcode or device disabled after entering ...

HT204266 Does iPad support apps other than from app store

Does iPad support apps other than from app store?

For private apps, you can get a developer license which allows you to install apps you or your company develop.
Robert

I recently purchased a song on my iPhone through the apple store and now it wont play on my phone. Any help?

Yesterday, i purchased a song on my iPhone through the iTunes store and it wont now play on my phone. Any ideas or help?

If you live in a Region that allows re-downloading Music...
Delete the Song(s) and re-download...
See Here > Download Past Purchases
http://support.apple.com/kb/HT2519
If not... Contact iTunes Customer Service
Apple Support iTunes Store Contact Us

The latest update of my IPhone 3GS has failed, now i can't use the phone. Please help.

The latest update of my IPhone 3GS has failed, now i can't use the phone. I have tried to restore but i get a message saying 'Iphone could not be restored. An unknown error occured(6). I am running the latest version of itunes (10.4) Please help.

Place your iPhone in manual recovery mode or DFU mode.
1. Connect your iPhone
2. Open iTunes
3. Hold down the home and power button for 8 seconds. After 8 sec, let go of the power but still hold down the home button until iTunes recognize your phone in recovery mode

HT1338 Why cant i find any support discussing how to switch 32 bit to 64?

I click on "about this mac" and im told that it will display what bit mode i am in, but it doesn't. I saw a youtube video that said to switch from 32 bit to 64 bit you simply press and hold the 6 followed by the 4 during boot up and that switches it. I tried that and my screen sat endlessly on a blue screen for as long as i held the 6 and 4 keys down.
Can anyone tell why it is so stupidly difficult to find info on this subject? Even typing into the help on my imac "64 bit" comes up with nothing. Like, seriously?
I've just installed mountain lion because i want to purchase Logic Pro X, which will only run in 64 bit mode, but i can't even see what bit mode my system is currently running in.......

As you have OS X Mountain Lion, your Mac is running in 64-bit mode, and your iMac has got a 64-bit processor, so you won't have any problem with Logic Pro X.
Since the Lion release, all Macs run by default in 64-bit mode. With Snow Leopard, this was different, because only the Mac Pro and some new Macs were running in 64-bit mode

Some how my iPad2 is in talk mode andn it has froze up - and now I can't use it. Can anyone help me ?

My iPad2 is in talking mode and has froze up. And it wont let me do anything. Do I need to take it to an Apple store ( which is out of town). Or do I need to reformat it ? I don't own or understand the cell phone, so I'm very new to this (ipad - technology stuff... And I don't know what to do. Can anyone help me out PLEASE? Thanks !

If you have VoiceOver turned 'on', then you need to touch or tap the field that you want to use/select and it should get a box around it ; then double-tap that field to activate/type it.
So if you are on the 'slide to unlock' screen, you first need to tap the 'slide to unlock' button to highlight it (it should get a box around it), then double-tap it to unlock it. Then for your passcode tap the digit that you want and it should get a box around it; then double-tap that digit to type it; and similar for the other three digits in your passcode. Once you've entered your password you can do the same (i.e. touch to select, double-tap to activate) to gradually get into Settings > General > Accessibility > VoiceOver and turn it off.
The manual (http://support.apple.com/manuals/#ipad) also says that you should be able to switch voice-over off by connecting to your computer's iTunes :
Turn VoiceOver on or off in iTunes: Select iPad in the iTunes sidebar. In the Options section of the Summary pane, click Configure Universal Access. Select VoiceOver, then click OK.
So select Configure Universal Access at the bottom of the Summary tab and set Seeing to Neither

I achieved an e-mail by mistake, now I am unable to find it. Please help

I have achieved an incoming e-mail by mistake, now I don't know where to look for it or how to retrieve it. Please help.

The answer probably depends on your webmail site (e.g., Yahoo, Gmail, Windows Live/Hotmail) or email program (e.g., Thunderbird). Can you mention which one you're using?

I WANT TO FORMAT MY MAC I HAVE LION 10.6 OS DISK BUT NOW 10.8 IS USING IN MY MAC SO HOW I WILL DO IT, I WANT TO FORMAT MY MAC I HAVE LION 10.6 OS DISK BUT NOW 10.8 IS USING IN MY MAC SO HOW I WILL DO IT

Dear Team
please assist me how to format my mac, in my mac i am using lion 10.8 and i have 10.6 dvd that is purchased from apple .i am ready to erase my all data.when i try to istall with this dvd machine is saying not able to install so please give me a advice

You may have downloaded Lion. You can create a bootable flashdrive. There are many tutos on the web, such as this one : http://macs.about.com/od/macoperatingsystems/ss/Create-A-Bootable-Flash-Drive-Wi th-Os-X-Lion-Installer.htm.
You can also burn an install DVD.
When booting, hold ALT key to choose your flashdisk, and start erasing your HDD and installing.
Despite you're ready to erase all datas, I'd advise you to backup your stuff, as experience shows after erasing a disk, very often you regret not having backuped files.

While upgrading foxfire my computer froze and now I can't use foxfire, uninstall or reinstall HELP

During installation of foxfire upgrade the install was 95% complete and then no activity< so I waited 15minutes for things to continue. There was no change so i decided it needed to be redone however my computer was completely frozen. That has never happened before. After final deserate measures(pulling the plug) and restart I tried to uninstall foxfire so I could install from scratch however my computer is unable to uninstll and when I try to insall foxfire from scratch at one point it says foxfire must be turned off< well I'm reluctantly using explorer and foxfire has not been on in 2 weeks. What can I do to get foxfire back?

you have a ps cs4 license for mac and you have some way of finding your serial number.
if yes, download an install the installation file. if you already have the installation file, what is its name and file extension? (eg, if it's one file, it should be a dmg file.)
if you need the installation file,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

DVD SuperDrive can't be used by Apple Software. HELP!

So a few days ago I replaced the internal CD drive of my PowerMac G4 Quicksilver with a genuine Apple DVD SuperDrive. It works great with regular CD's, and blank CD-R's, but Disk Utility and iDVD don't recognize DVD-R's anymore (not even with my USB DVD drive that supports every type of disc). Disk Utility always says that they are "Read-Only". And iDVD says that a 4.7gb disc is 0 mb.
This doesn't happen however, with apps such as Toast, which knows that it's a 4.7gb blank DVD-R and will burn to it with both the USB and internal drive. Even Apple System Profiler says this:
PIONEER DVD-RW DVR-103:
Firmware Revision: 1.90
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW
Burn Underrun Protection CD: No
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media:
Media Type: DVD-R
Blank: Yes
Erasable: No
Overwritable: Yes
Appendable: Yes
Whereas Disk Utility says this about the same disc:
Disk Description : PIONEER DVD-RW DVR-103
Total Capacity : 0 Bytes
Connection Bus : ATA
Write Ability : Read Only (DVD-R)
Connection Type : Internal
Capabilities : CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-R, DVD-RW
Connection ID : Device 0
Partition Scheme : Unformatted
And iDVD just complains that [any] video exceeds the maximum size allowed. Upon reading the Project Information like it said to, it says that the maximum size for the disc is 0 mb.
I seriously don't understand what is going on here, I've never had a computer do this kind of thing, where some programs fail after replacing hardware, but some don't. I have a really good repertoire with computers (both PC and Macintosh) but I'm stuck here. I tried all the usual things; Repaired/Verified the disk and permissions (of my Tiger and OS 9 HDD's), checked for a firmware update on the Apple Support Site, but both of those said that I didn't need the update after it finished "installing". Any ideas anyone???

Well of course they dropped it, the drive is almost the same age as the computer haha, which was also forgotten about after only a year before they went on to another model. But even so, the computer originally shipped with the option to have a DVD-RW drive, but it was about $200 cheaper to get it without, and at the time, most people didn't even need the DVD drive. So it comes naturally with the ability to use it.
But I think I know where you're coming from, so I decided to check what iTunes 9 would say about burning to the disc, and it just crashes every time I click "Burn playlist to disc...". So yet another Apple product refuses to work with it.
On another note, even though it's only Apple software that seems to be having issues with it, does it matter? What I mean by that is, the drive works with Mac OS X because of an Extension, and the extension allows applications to use the drive. (The extension for this drive is also natively supported by OS X Tiger) Now, if something were wrong with the extension (one would assume this because of the issues with Apple applications) wouldn't it just not function at all? The only thing I can think of is that the new drive somehow corrupted the Apple software, while leaving ones like Toast Titanium alone.
Just to clarify (I'm still trying to organize my own thoughts right now):
*_What Works_*
*Plays CD-R's
*Can write to CD-R's
*Every application (Apple or Third-Party) can manipulate a CD-R disc
*Can recognize and play retail CD's
*Recognizes DVD-R's in both USB and internal drive
*Third-Party applications (ex: Toast Titanium) can burn to DVD-R's in both internal and USB drives
*Apple System Profiler recognizes the drive, and it's capabilities. And knows that it is Apple Supported/Shipped
_*What Does Not Work*_
*Official Apple software can not burn to DVD's of any kind
*The computer occasionally rejects DVD's (ejecting after trying to load for a while) regardless of the drive
*iTunes quits un-expectantly when told to burn to disc
*Disk Utility says that every DVD is "Read-Only" and has a capacity of 0
*iDVD thinks that the disc is either 32mb or 0mb (changes every time I open it)
Message was edited by: tanner1294

Until now, my daughter has used my apple ID and account. She now wants her own iD and account but doesn't want to lose her downloads - is this possible and how?

What we want to do is retain each of our respective downloads whilst allowing for a future separation of the account. She has an iPod touch and I have an iPad. Currently she uses my account but wants her own and frankly I don't want many of her downloads. How do we separate?

Starting a new account does not erase anything.
There is no such thing as "separating" content. Give her a copy of the entire library, and let her delete whatever she does not want. Meanwhile, you can delete any of her stuff from your original library.

My iphone 5 went invalid SIM so I reset the setting. Now I'm unable to activate my phone. please help

Unable to activate iphone.

Thank you, I didnt know that. Anyway, do you have any idea how much will it cost in India to unlock iphone 5 from T-Mobile UK?
You have more chances of getting struck by lightning on a clear blue sunny day than T-Mobile in UK unlocking your iPhone in India especially as it was hacked

HT204266 Hi pls support me how to switch my store to Saudi Arabian store? By mistake my store is switched to USA store so now I'm unable use my apple id, pls help me

Similar Messages

Maybe you are looking for