HT204266 I have an iPhone 4s and I have been having troubles with the downloaded apps. I have tried everything from re installation to restarting and deleting but nothing is working. When I press the icon, there is a flash and I return to my home screen.
Exactly as I mentioned above, the app just gives a flasha nd returns to the home screen, I have tried everything and nothing has really worked. Any suggestions?
Basic troubleshooting steps straight out of the User Guide are restart, reset, restore from backup, restore as NEW. Have you been through ALL of these steps?
Similar Messages
-
I have a Lucid 2 LG. I have been having trouble with insuffient storage. I have a 8G phone and have spent hours with Tier 2 tech trying to move info from the internal storage to the SD card with no luck, When I go to storage in the settings it states that over 4 gigs is for Misc? System data takes up over 4 gigs. No one can tell me what system data consist of. So My question is does anyone know what system data is? I am assuming I have a 8 gigphone but can only use 4 gigs???
System data is the OS or operating system. That is where the recovery stays separated from the rest of the storage so that it doesn't get corrupted. It is not accessible and non-movable.
-
I press the power button + the laptop turns on but nothing else happens. The screen also turns on but it's blank.
I have now the same problem with 2 bords of this.
I've a friend with one, that we turn it on an all systems seems to work but the screen don't turs on and the d-led ligts turns reed. After that i take off al cards and trie to starts and the problem as still the same. Acording to D-led lights, this means a processor's fail. I take off the the processor to my board and it start's normaly, i've worked whith that all night without any problem. After that i change my board with the other, put all cards, and when i starts,... the problem perssists. (sorry my english). I putt the other board in my case, with my cards, and turn the system on, and was doing the same. I take off the 2 bords, putted them in a tabel, just with prossessor's, AGP Card, one DDR, my disk and clear CMOS, and when i start's all 2 continuos with the same problem, ?( i take off the AGP Cards, and the 4 ledds turn reed again and the problem was the samne. Now i ask, WHAT THE HELL CAN I DO, did i broke my board too, who can i fix this. I can´t change the bios version they don't start. The first was running well, until my friend chenge to a Termaltake Volcano cooler, after that, start´s with this problem. My board was working fine until i change to is case. What i can possíbel have done wrong????? ;( ;( ;(
What can i do to fix this 2 problems.
Thanks to all that read all this, -
Ipod touch troubleshooting
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I just bought an iPhone 5c but siri doesn't work when I press the home button only raise to speak works! Siri is activated and everything any help?
Press and hold Home until it beeps.
Then let go and speak. Or contune to hold and speak and let go when finished speaking. -
I have been having troubles with this for months and am extremly tired of not being able to download my songs. I bought these songs off of Itunes as well, so I really hope i can retrieve them. I do not know where to find a personal apple support person yet, does anyone know where to find one on the website?
See these previous discussions:
Waiting applications: Apple Support Communities
Downloading apps stuck on waiting...: Apple Support Communities -
My computer continually asks me to enter my password for Keychain access. This problem is continuos and I am having trouble with eliminating it.
I have changed my password through Security and my Accounts numerous times to no avail.
Is there anything I can do other than Resetting the entire computer and re installing all of the software, apps, etc.etc.Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences... ▹ First Aid
There are four checkboxes in the window that opens. Check all of them. if they're not already checked. Close the window.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.
If you use iCloud Keychain, open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Then re-check the box. Follow one of the procedures described in this support article to set up iCloud Keychain on an additional device. -
I have been having trouble with my iphone 4 for the past day . i tried to update it to 7.0.4 then the screen went blank and it keeps telling me to connect to itunes . I have connected it to 2 computers , using different cords and it doesnt recognize it . It says it is in recovery mode and i need to restore . after clicking restore it says that my iphone cannot be restored . I am very frustrated because i have been online searching for solutions all day and nothing seems to work . As soon as i turn on my phone it goes to the apple logo for about 2 seconds then the connect to itunes screen . SOMEBODY PLEASE HELP ! my phone is my life and i need it back on .
Connect the device to iTunes and restore from the most current backup.
If the issue continues, restore as new. -
Have in iPhone 4 that's not been ANY trouble in the last 18 months that I've had it, but all of a sudden it is not allowing me to connect to the iTunes shop at all. It's on ios7, and I've not tried to sync to my computer yet, but I thought I'd try here first
Hi there northwave8,
You may find the troubleshooting steps in the article below helpful.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
-Griff W. -
Only had my iPhone 5 a week and already I'm having trouble with the home button? Any soloutions
Only had my iPhone 5 a week and already I'm having trouble with the home button? Any soloutions
Sure. Take it back. If you got it from new it has a warranty.
Or describe the problem fully in case we can help. "Having trouble with the Home button" doesn't give much of a clue.... -
I'm having trouble with custom ringtones. I have downloaded the free software "makeTones" and have created some ringtones. I then copied those to Mac and played them in ITunes. My Itunes library does not have a ringtones tab. I can not sync the ringtones (or I don't know how)! Please help.
Yes, the file extension is M4R. Does it matter where I save these files on my Macbook? I then opened them in Itunes and played them. I did find the Tones folder in Itunes but the Tones or Ringtones tab does not show up when I select Iphone (within Itunes). When I open the Tones folder in the Library, it is empty. Thanks in advance for your help.
-
I'm having trouble with my macbook pro, I have only had it for three months, when I plugged a camera sd card into the sd slot it isn't appearing anywhere on the computer and i can not access my photographs. can somebody please help me?
Shootist007 wrote:
Clifton I must disagree with you on the above statement. It is my opinion and experience that you should never connect the camera directly to any computer, Mac Windows Whatever.
It is always best to Remove the memory card from the camera and put it in a card reader, whether an external reader or one built into the computer, to copy images from the card.
Hi Shootist. I would be interested in hearing some reasoning on this. I almost always use a USB cable to connect my camera to the MBP for transferring pictures, and have moved about 30,000 this way over the last 6 years since my photography went digital. Recently, on the rare occassions when I have only a few to transfer and I was too lazy to go for the cable, I have used the card reader; about half those times I have difficulty getting the MBP to recognise the card. I find I have to press the card very hard into the slot for it to be recognised.
My rationale is quite possibly wrong, but I feel that the USB connectors are more robust and hard-wearing than the flimsy connectors on an SD card. Also, I haven't measured it, but I think the data transfer is faster with the cable. (I just came across this test, which reports noticeably faster transfer for cable than built-in card reader, but the computer was a PC)
Chiara, sorry for hijacking your thread. -
My space bar only works when i press the alt key, help!
My space bar only works when i press the alt key, help!
I researched on here and my space bar was set for the speech function, now resolved...this site obviously works, nice one!
-
hi, i have a macbook air and i've been having problems with the camera when i'm using skype. i know im no the 1st one and i'd like to know when apple or someone 'll do something about this.
Try reinstalling Combo Update.
http://support.apple.com/kb/DL1676
Best. -
I'm having trouble with my Pages app. Over half of my document show that they are updating. I cannot open or delete the documents. Does anyone know a fix for this? Please help.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702http://support.apple.com/kb/TS1702
Cheers, Tom
Maybe you are looking for
-
Generic Object Services ; create attachment function grey out in Tcode KA03
Hi all, I would like to know how can I enable create attachment function in GOS toolbar in Tcode KA03. Currently it was grey out. However, was tried to use the same function in KS03 and it works.Please help. Thanks!
-
Flex Mobile : URLLoader bytesTotal always at 0 when loading file
Hi ! I'm trying to load external file with UrlLoader in a Flex Mobile Project ( Initialy it was with Data/Services Options of Flash Builder, but I have the same problem ). On the complete event, it work on the desktop ( bytesTotal, xml... ), but when
-
Can I use FORMAT function in SQL statement? If not, how to do it? Here is the SQL that I want to do. SELECT last_name, first_name, FORMAT(birth_date, 'mm/dd/yyyy') FROM customer
-
New version of itunes not compatible with my mac
I have a new iphone 5s, but an old macbook that cannot download the latest version of itunes. When I tried to connect my phone with my itunes, it was unable b/c the version I have is too old. How do I: 1. get updates if my computer is too old to dow
-
Hi guys, how to change the Fax title after being sent to Sost, the current one is : SAPLMEDRUCK /20070927/140149 can we modify /change to others?