HT204291 Airplay mirroring on my iPhone 4s has disappeared since updating to iOS6.1. Has anyone else seen this same problem?
The mirror option seems to be missing since updating to iOS6.1
I can still use airplay from applications that allow it, however I can not find the option to mirror my whole iPhone as I could with iOS 6.0.
Anyone know a workaround?
EDIT>>> FEATURE IS NOT MISSING
It took me several restarts of my iphone, but the feature has reappeared.
Message was edited by: pjanczuk
I have the same issue. Any other app works with airplay. Music app, videos received in iMessages, YouTube and so on. The videos in the camera roll don't want to airplay. Either I get a black screen or a spinning wheel on TV. Any ideas?
Similar Messages
-
HAs anyone else had the same problem, after doing an update nothing will come up for tribez just a blank screen. My late nights are not the same now!!!
Your Performance preferences screen capture reveals you have a single hard drive with little available space to accommodate both the Photoshop scratch file and the swap files of the OS.
It's obvious that Bridge finds itself at times with insufficient space to build its cache.
However, it's unclear why that should affect only DNG files and not other type of image files. Puzzling, unless the DNG files are the only large image files you have.
Parts of the following may illustrate what happens when the scratch file is on your boot drive:
The rule of thumb I follow to figure out scratch space says to figure on 50 to 100 times the size of your largest file ever multiplied by the number of files you have open. I have seen the scratch file exceed 800 GB once, an admittedly rare occurrence, but it often exceeds 200 GB when stitching large panoramas and the like.
As an example—and stressing that I'm aware that others have even more scratch space than I do—I keep two dedicated, physically separate hard drives as my primary and secondary Photoshop scratch disks and a lot of GB free on my boot drive for the OS. I also have 16 GB of RAM installed.
Additionally, if you only have a single HD, i.e. your boot drive, you'd need it to be large enough to accommodate both the swap files of the OS as well as Photoshop's scratch. -
Photos from my iphone and ipad are going into my photo stream on the devices but aren't going into the folder on my windows PC. They used to but they suddenly stopped. Has anyone else had this same problem?. I have checked all settings and they appear OK
Hi AP_In_Surbiton,
I am really sorry that you have had so much trouble getting your Caller ID up and going. I'll be happy to help you out with this and get it working for you.
Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
I am having problems with my EE signal on my iphone 5 - sometimes "no service" or just one bar up - anyone else having the same problem?
Hello there, alisonwayne.
The following Knowledge Base article provides some in-depth steps for troubleshooting your issue:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Has anyone else experienced this same problem?
Whenever I press the menu, forward, back, play and pause buttons my ipod does what the middle button is supposed to do. When I press Menu it won't take me to the menu. When I press play or pause it won't play or pause. When I press forward or back it won't go to the previous song or the next song. All it does is do the thing where you can skip through the song or it comes up with the rate stars. I don't know what caused it. I was just listening to a song one day, pressed forward, it didn't go to the next song, had a look at the screen and thats when it started doing this. I need to know if anyone else has experienced this problem and how to fix it because its really annoying me. Thank you
First step is to do a reset on the iPod.
I am not sure if this is the same for the Mini, but for later iPods... Slide the hold switch from OFF to ON back to OFF then immediately hold down BOTH the center and Menu buttons for a good 15-30 seconds or until it restarts with the Apple logo.
Resetting isn't always effective once and you may need to retry it several times to get it to work.
If you reset and you still have an issue, you may want to next attempt a Restore of the iPod.
Patrick -
Need some help.
Thanks. I added the supplemental and it looks like I may be back to normal here. I will have to fully check it out but Logic is opening up correctly and no weirdness so far.
-
I recently updated my software on my iphone 4 to the iOS 5 and ever since i have had no service. I have been on the phone constantly with at&t tech support and apple. Tech support cannot figure it out and said they think my problem has everything to do with the new software. Apple is saying it has nothing to do with the new software that it is probably something to do with my phone itself but i was not having this problem until i updated the new software. Is anyone else having this same issue and if so any ideas on how to fix it?
Yeah, it´s happening in normal 3g coverage area, in fact, i used the 3g to download the iOS but after installing it, the phone doesn't get the 3g anymore.
I tryed the reboot pocess, but it didn't fix it
I haven't tryed the restore to factory settings process,
Is there a way to downgrade to iOS 5.1 again?
Thaks -
Since I downloaded IOS8, my iphone will not sync with itunes on my MacBook, which means I'm also having difficulty doing a simple manual backup of my ios device to my MacBook. The fact that my MacBook has a 32 bit processor and runs on OS X Version 10.6.8 (as good as it gets), is, apparently, the root of the problem since I've never had this problem with previous ios versions. Is anyone else experiencing the same problem and what is Apple doing about it?
I have the same issue, except I am running an i5 iMac (64-bit) with 10.10.1 installed. I can't tell if it is an iOS issue or an iTunes 12 issue. It started happening to me when I got the iPhone 6 AND upgraded to iTunes 12. It wouldn't connect my iPhone nor my iPad 2 (running older iOS). I had to install a fresh version of iTunes and it "sort of" helped. It will see the devices now, but then it forgets and I have to reboot occasionally for them to be seen again.
This is a big problem and seems to be pretty wide spread. -
I just downloaded iOS 6 on my iPhone 4 and now can no longer open internet links that were texted to me. Anyone else having the same problem or know how to fix this?
The SMS links thing is highly annoying. You don't have to copy/paste however. You should see an icon like this: (>) to the right of the text bubble with the link. Tap on that, the in the screen that opens, tap "Visit".
Alternatively, you can tap twice directly on the link, then hold your finger down after the second tap.
Still unnecessarily difficult, but not as bad as copy/paste.
What I don't get is why can't I find any mention of this change or how to fix it (if even possible) elsewhere online? -
Since updating my iPhone 4 to iOS 5.1 I'm having compatibility issues with my speakers / docking station and my iTunes wifi sync isn't working. Anyone else having the same problems? Both worked fine until the update...
Okay. I got it working again by setting it up as a new phone instead of just syncing. Then I backed up. All is good today.
-
After updating to iOS 5.0 on my iPad2, my contacts updated in name only, the information (addresses, phones, etc.) is blank. Has anyone else seen this? The cloud has all the contact information intact.
No, no replies yet. Fortunately, I have all my contacts backed-up on Google. I haven't lost the data, just need to merge into my iPad contacts. Good luck with your call to Apple.
-
Changed group membership in WGM 10.6.3 from the 10.6 server. The change takes overnight to work. Formerly ran WGM from my 10.6.8 mac (worked perfectly) but now I am at 10.7.5 and must use WGM on the server. Has anyone else seen this behavior?
Hi
"Changed group membership in WGM 10.6.3 from the 10.6 server. The change takes overnight to work"
If I've understood you correctly I've never known this or anything else to take that long? What were you trying to do exactly?
"Formerly ran WGM from my 10.6.8 mac (worked perfectly) but now I am at 10.7.5 and must use WGM on the server. Has anyone else seen this behaviour?"
http://support.apple.com/kb/HT1822
HTH?
Tony -
Captivate 8: Getting this message "Unable to locate LMS's API, content may not play properly". Then I get a debug message of "44:Tue Feb 17 2015 : InIsLoaded, returning false". I also see a message in the preview pane when I view the .htm file in the project folder "This course requires JavaScript to be enabled in your browser. Please enable JavaScript, then relaunch the course." JavaScript is already enabled and I'm getting this in IE9 and Chrome 40....Has anyone else seen this?
The first part of your issue will be resolved if you load your course from an LMS. If you are not hosting your content on LMS, you can disable the reporting in your Quiz settings (Edit > Preferences > Quiz > Reporting).
Not sure about the Javascript related issues.
Sreekanth -
3 year old iMac 24 running OS 10.7.4. After it has been on for a day or so, it stops going to sleep and becomes very slow. This only happens when Safari is running. Quitting Safari solves the problem. Has anyone else have the same problem? Does not happen on MacBookpro only on iMac.
Hello Albert, see how many of these you can answer...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab, are there a lot of Pageouts? -
Using Airport Utility, OS X Yosemite sometimes does not find my airport extreme and my iphone 6 with 8.1 does find it. Is anyone else experience this glitch? Also I couldn't log on to Apple Support... Thanks
*Feedback*
"Use the form below to send us your comments. We read all feedback carefully, but please note that we cannot respond to the comments you submit."
http://www.apple.com/feedback/ipad.html
We can complain about Apple's business decisions, but these discussions are user to user talk about possible solutions.
Here are the places to report bugs:
Get an account at
http://developer.apple.com/ then submit a bug report to http://bugreporter.apple.com/
Once on the bugreporter page,
-- click on New icon
-- See if you need to attach a log file or log files, clicking on Show instructions for gathering logs. Scroll down to find the area or application that matches the problem.
-- etc.
Maybe you are looking for
-
How do I use my creative cloud subscription on more than one device?
I have Creative Cloud on my laptop and I would like to be able to use it on my Galaxy tab 3 as well allowing me to be more mobile, is this possible?
-
Oracle 9i Lite Missing Link Targets
On the following page http://otn.oracle.com/tech/wireless/tutorials/index.html the link to Oracle9i Lite - Developing Web-Based Mobile Applications which is http://otn.oracle.com/docs/products/lite/doc_library/release501/doc/wtg/html/wtgtut.htm redir
-
Run same run book again and again until no records in DB.
Hi, I have created a run book which will fetch records from SQL DB and add machine to SCCM collection. But this run book will work only for one record. If I have 5 records in DB, I need to select one at a time and add that machine to collection and p
-
Hello, I am using ORACLE 11g and RHEL 5. I have a performance tuning issue. One of the query which returns the output in 0.016 seconds i.e. the below one select to_number((sysdate- to_date('1970-01-01 00:00:00','YYYY-MM-DD HH24:MI:SS')) * 86400 - ((s
-
Manage MSMQ is missing from Failover Cluster Manager when configured using powershell
Hi, I am hoping someone would be able to help me as I have looked on the internet for an answer to this. We deploy a number of servers that are configured using Powershell. I am in the process of creating a clustered WIN2K8R2 cluster with MSMQ. I am