HT204291 I cannot find the AirPlay icon for the life of me. I have iOS 7.0.2 on my iPad Mini. Connected to my WiFi network just fine. I swipe up to get to the control center badges and all I see is the AirDrop icon. Trying to disable mirroring on ipad for
I cannot find the AirPlay icon for the life of me. I have iOS 7.0.2 on my iPad Mini. Connected to my WiFi network just fine. I swipe up to get to the control center badges and all I see is the AirDrop icon. Trying to disable mirroring on ipad for Netflix streaming and don't know what to do. Any luck out there?
If you last used an Apple TV to mirror your device and have updated to the newest Apple TV software, go into settings and turn airplay back on. The icon should then appear on your iPad mini when you swipe up allowing you to disable it for Netflix. After updating my Apple TV software for some reason it turned airplay off.
Bob G
Similar Messages
-
I got locked out of Mac os 9 and now I can't get into OS 9 or OS X. All I see is the Macintosh SE and a finder face and text that says "mac os 9.2 welcome to mac os". I can't get into COntrol Panel to reset the password to allow me to get in.
Do you have OS X and OS 9 installed on your Mac? If so, startup with the Option key depressed. This will open the Startup Manager window. Select the OS you want to start from & click the right arrow.
Cheers, Tom -
A magnet fell on my macbook "late 2007 series black" and it stopped working. When i start my macbook up it sits on the white screen. i tried inserting the snow leopard disk to do a clean install but the disk ejects and all i see is the pointer. i even bought a new hard drive to do the clean install but the same thing happens. Please Help
Your problem is not Boot Camp, in fact, is your optical drive. Win XP requires indeed sp2, but also the internal drive, does not work from external optical drive.
For other possible tricks, please use the appropriate Boot Camp forum, not here. Mac OS X may be installed from both external and internal optical drive and/or internal/external partition of a disk, any disk. Windows is not so generous. -
I connected my apple tv2 to my dvi port and all I see is the apple logo
I connected my Apple TV2 to my dvi port on my HDTV and all I see is the apple logo on the screen. I keep pushing menu on the apple remote and i see a white led turn on and off but the apple logo continues to be the only thing on the screen. I expect to see a menu as the apple manual indicates should appear on the screen. What's it gonna take for the menu to appear and the product to operate as expected?
Use the search function here to look at DVI problems. Even IF a HDMI --> DVI cable worked, there still won't be any sound. Apple doesn't seem to want to make the ATV2 work with anything less than HDMI. And it's pretty clear on their Apple store that the ONLY output is HDMI. IF your HDTV has limited HDMI ports, you might want to thing about switching one of your other inputs.
-
my i pad is connected to my wifi network bt won't connect to the internet I have tried resetting network connections. it will connect to the internet from my phone hot spot
Try restarting your WiFi router by removing power to it for 30 seconds.
-
I use the Pencil Tool to modify pictures and drawings in Photoshop Elements. Normally I would see an outline of the pixel group - so for example, if the pencil size was 6 pixels I would see the outline of the six pixels. This allows very accurate poitioning of the tool. All of a sudden these outlines have disappeared and all I can see is a representation of the pencil where the cursor is. This makes positioning rather hit and miss especially if the pixel size is large. What has changed - and how can I return it to the way it was ?
You have "standard" set as your curser preference. To change it Edit<Preferences<Display and Cursors.
http://help.adobe.com/en_US/PhotoshopElements/7.0_Win/WSAF9F0406-654F-4770-913A-C56B7BFD60 BB.html -
Anyone having the same problem with the new OS7? I can no longer load pictures from my SD card to my iPad using my adapter.
Are the card readers apple ones or knockoffs? Unfortunately iOS7 brought with it software that looks for the authentication chip in the cables and docks. If the manufacturer got permission from Apple to make devices then it should be fine, but if the manufacturer didn't get apple's permission then their chip isn't recognized, generating that error.
If your connectors are Apple ones have you tried to reset your device? Hold down the sleep and home keys for about 20 seconds or so until your iPad reboots. Then try again. -
Original version of the iPad -- SCREEN WENT BLACK AND ALL I SEE IS THE APPLE NOW. HOW DO I FIX?
RE: original version iPAD
Was having trouble with it shutting down. Now all I have is a black screen with the Apple in the middle, and it's making a "connection type" sound every few seconds.
Any ideas how I can fix this issue? Thanks for any help.Restart, reset, restore, return to Apple.
-
Can someone tell me how to fix this problem before I use up all my data?
If you can't connect to home wi fi, or any wi fi, go into the RESET area of your SETTINGS and choose RESET NETWORK CONNECTIONS. Turn the phone off and back on and you should be okay. It may take more than one try. Good luck.
-
Tried Resetting, Now all I see is the APPLE logo and loading
Ok so here it is....I bought a used original iphone of a friend of mine. On my way home, I decided to reset the iphone to its original settings....now its been like 6 hours....and all I see is the apple logo, then it tries to load and it stays that way....then it blinks and the apple logo comes on again. Is there anything I can do??
You should put the phone into DFU mode and restore it in iTunes.
To put your phone in DFU mode:
1. connect the phone to a computer with iTunes
2. Hold the home button and sleep/wake button simultaneously for 8 seconds.
3. Let go of the sleep/wake button and continue holding the home button
4. If successful a dialog box will appear in iTunes that states that an iPod was detected in recovery mode. The phone's display will remain black.
5. Click ok in the dialog box, then click restore
After that the phone should be functional.
I hope this helps. -
My Mac HD doesn't start up, I get the reinstall prompt and do not see a macintosh HD icon while starting up using option key.
When start up I land into the Mac OSX Installer. Has my LION crashed or the HD is not responding?Try booting while holding down the Option key but make sure there aren't any disks in the optical drive first.
I just found this:
Select a startup disk *(on some computers)*
Option (To open the optical drive when choosing a startup disk, press ⌘-period.)
here. http://docs.info.apple.com/article.html?path=Mac/10.5/en/cdb_strtup.html
Carolyn -
when i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?
you may be connected to the wireless network but the question is the internet working properly on the wireless network...
what i mean is that i can make a wireless network without the internet so i can save and share files and have other devices connected to the same network access them... but you have to make sure that your internet it running properly... may have to reconfigure the router is your using PPPOE or if it was working prior to your post then try to restart your modem... that usually resolves most issues. -
After I upgraded to iOS 5 my pc and laptops (including the apple one) do not recognize the laptop when I connect to the USB. The wireless function does not function either. I cannot sync the iPad 2 anymore because of this. Also, the only way it charges is if I lug it to the wall or pc USB and turn it off. I was able to charge the device while it was on. Why is this happening? How can I fix it? If there is no fix, how can I revert back to an older iOS. I tried using the support apple instructions but the iPad is not recognized by the pc and I cannot sync the iPad iTunes to revert back to an older iOS. Any help will be greatly appreciated.
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
You may think you are connected to the internet, but maybe not. Click on Safari and see if it connects.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I bought a second apple tv and would like to control it with the remote app but cannot find a way to add a second device. Anyone have an idea how to do that?
I'm having the same issue and would like to get some help. I set up a second Apple TV in our bedroom and wanted to be able to control it using my iPhone like I do with the Apple TV in the living room. The new Apple TV is active on the network and I've made sure the same Apple ID is used for both the Apple TV as well as the Remote App on my iPhone. I'm just wondering what I might be overlooking.
-
I created an iCloud account and also had to get more space so after I have made the purchase, I am unable to backup my phone! I have a stable wifi connection at home and all I see for hours and hours is "Backing Up .. Estimating time remaining"!!!!! Plz help I'm unable to make the backup as I need to transfer all my data on my new iPhone 5S
This may be caused by a corrupt existing backup that needs to be deleted, or by data on your device that is causing the backup to fail. To troubleshoot these, try deleting your last iCloud backup (if you have one) by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, tap your device under Backups, then tap Delete Backup. Then go back and turn iCloud Backup back on and try backing up again.
If it still won't back up, you may have an app or something in your camera roll that is causing the backup to fail. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If the backup is successful, then the camera roll and/or one of your apps is causing the backup to fail and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.
In the meantime you can back up your phone to your computer by connect it, opening iTunes and going to File>Devices>Back Up. Also be sure to transfer your purchases (File>Devices>Transfer Purchases). Then set up your new phone and when given the option, choose Restore from iTunes Backup and follow the prompts to restore this backup to your new phone. This will be much faster than using iCloud anyway.
Maybe you are looking for
-
Connection to MySQL via ODBC not working
Hello all together, I've got a problem with the ODBC connection to MySQL. The connection via ODBC is established and things like tnsping are working. When I select some data within the SQL*Plus environment, I get no real result. For example "select t
-
How to remove printing of page 2 on smartforms
Hi, I have two pages on smartforms, the 1st page contains the customer letter and the second page contains the table of articles placed on the main window. If the internal table passed has no rows page2 is still being printed with blank or no data. W
-
Everyone says do you have filters on your iPhone and I say no and it's suppose to come with iOS 7.0.4 isn't it?
-
hi, first post so i'll try to be as precise as possible, might miss infos desktop manager says none and wont recognise usb connection dm opitons/connection options don't display a (detect) button device manager/device connection only option is : C
-
IPod disconnects in the middle of updating
Everytime i try to update my ipod, it disconnects. then, it will come back up on my computer and disappear again. It will also open a window asking my setup my ipod (wich i tried doing 4 times). i dont know wat to do. please help! thnx