HT204291 I have a MacBook Pro running Mavericks OS 10.9.2 and discovered that my airplay mirroing feature to my AppleTV (version 6.1) is not working. Is there any fix for it? I have been waiting for 4 months for a patch to come out. Any ideas?
Any ideas on a patch or fix for the Airplay mirroing feature to AppleTV? Home sharing to AppleTV is also broken after I upgraded to Mavericks 10.9.2.
Thanks.
I do not get the Airplay icon on my Macbook's menu bar. I have checked the box in the Display settings to show mirroring options but still no icon. Airplay Display shows 'No device Detected'. Both AppleTV and MacBook Pro are on the same physical Network (192.168.1.0/24) and connected directly to my home ethernet switch (not wirelessly). I also made sure MacBook's Firewall is disable. Airplay feature use to work before upgrade to 10.9.2. As far as Home sharing from my AppleTV has a similar issue; it just does not find my MacBook after a while of loading and searching my music library. I am logged in to icloud on both devices (appletv and macbook). Also use to work before upgrade. Any ideas or recommendations. Thanks.
Similar Messages
-
Invites to my calendar do not appear in my calendar on macbook pro running Maverick, but appear on my other icloud synch ios 7 ipad and iphone.
Why wont the invites show on Macbook Pro running Maverick?
All other calendar events sync fine through Icloud.Hi Fundads,
If you are having issues receiving calendar updates on your Mac, you may find the following article helpful:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Regards,
- Brenden -
I am trying to find an app or software to burn iMovie 11 slideshow to a dvd. I have a MacBook Pro with Mavericks. There are a lot of DVD Creator apps at the App store. Looking for a recommendation of what to use and tips. Thank you.
I've been using "Burn" for years and it has been the only DVD burning software I have ever used for the mac. I have never needed to look at other apps. Unless you want something that has more bells and whistles such as Roxio's "Toast" : http://www.roxio.com/enu/products/toast/pro/overview.html
There are thousands of quality free apps out there for the mac that are not part of the App Store. All you have to do is read reviews online, do a little search, the Apple forums are full of recommendations from experienced users that have been here for years... -
I have a MacBook Pro running Lion. I need to use Lion to run my Dragon. I would like to partition my drive to use Mavericks for everything but the dictation software. I'm a newbie to apple
To resize the drive do the following:
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work. -
Hi, I have a MacBook Pro on Maverick 10.9.1. I recently got squeezed into an iPhoto upgrade I didn't want to do. When it had finished, all photos for 2012 -2013 had disappeared and instead of it saying I had about 6000 photos, it now thinks there are 17000+ despite there being about half of them missing? And no, I didn't think I would need an upgrade.
I may have back up these onto a time capsule but the voltage I am getting at the moment (Tanzania) isn't enough to start it up to check. My feeling is that they are still on the nard disk and can be rescued. But how??? ThanksTo be safe from automatic updates that you do not want, i.e., on a slow network, change your System Preferences for the AppStore. Disable downloads in the background and automatic install, and leave only security updates enabled, so you do not miss them.
When it had finished, all photos for 2012 -2013 had disappeared and instead of it saying I had about 6000 photos, it now thinks there are 17000+ despite there being about half of them missing?
What exactly did you do, after iPhoto updated? This looks, like you imported your iphoto library instead of upgrading it. If you cannot find the original library, you really should try to restore the library from the backup. How long will it be, until you get to a better power supply?
Do you keep your iPhoto library on an external drive or on your system drive?
Try to search for a file called "Library6.iPhoto". This file is part of any iPhoto Library. To search your entire mac download
Find Any File , as described here in Old Toad's post:
Re: Where is my iPhoto Library? It is not in my Pictures folder, and I cannot find it through Finder. Help! -
I have a new macbook pro running mavericks and only using Safari as my browser. 75% of my url requests are 'hung up' and freeze. I have seen other posts and have tried to clear cache, reset safari, remove extensions, but to no avail.
Any recommendations?If it works in a new user account, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About -
Have a MacBook Pro running Lion (10.7.9) and an IMac running Snow Leopard (10.6.8). Want to Back up both images and restore on opposite machines. Essentially swapping images between hard drives. Is this possible and any "gotcha's" to look for? Thanks
If the MBP came with Lion, it most likely won't boot with SL. Easiest thing to do is create a bootable backup/clone of each to an ext HD, partitioned to hold each on a separate volume, ensure that the original machines can boot with their respective clones, and finally, try booting the other machine with the other clone. Images are useless since you can't boot with them to test them out.
-
I have a MacBook Pro running 10.7.2. I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade. iPhoto does not see the camera nor does Image Capture. IC says there is not a camera connected. Cable is known good. Has something changed? Thanks!
If neither iPhoto not IC can seethe card it might suggest an issue with the card or the ports on the camera/mac.
Try reformat the card, change the ports and/or use a USB Card Reader. -
My Aperture 2.1 has gone into a continual thumbnail mode. I left the computer, a MacBook Pro, run all night, about 12 hours and it is still making thumbnails. I tried reloading Aperture 2.1, but that did not change anything. I have also turned the system off, for a period of time, and then turning it back on, when I click on Aperture, it comes up and locks in the thumbnail mode. I can view my stored pictures, even modify them, but it still says thumbnails.
I got in this mode by trying to import "one jpeg photo", from a scanned slide using a Nikon Scan4 IS5000ED scanner. I had saved the scan to my desktop before I tried to import it.
Please Help, Maurice A Bird at [email protected]
ThanksMy daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!
-
I have a macbook pro running snow leopard. Just recently I cannot view youtube videos and other online videos. I recently updated my flashplayer plugin and I believe that is the problem. Is the latest flashplayer plugin compatible with 10.6.8? If this is so, I need to find an older flash player plugin to reinstall. I do not want to upgrade from 10.6.8 at this time because I have 18 yrs. worth of financial records on Quicken that I have read will not work with Lion and I've read bad things about running music programs on Maverick.
rayvonr wrote:
...I have 18 yrs. worth of financial records on Quicken that I have read will not work with Lion and I've read bad things about running music programs on Maverick.
1) Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) is a full featured app that can be downloaded from Intuit for $15 and will work with your data file if you are using Quicken 2005, 2006 or 2007 (if you version is earlier, let me know for more instructions on easy conversion):
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
2) Partition your hard drive, or add an external hard drive and install Mavericks there and "dual-boot" to operate your music programs in Snow Leopard and experiment with them in Mavericks.
DO NOT install Mavericks over Snow Leopard! -
I have an Epson printer on a Wifi network. Windows 7 desktop is running the network, and my wife's HP Win 7 laptop prints to it just fine. My MacBook Pro running Yosemite won't detect it, and I do have the latest driver installed. I didn't have a problem when I had a Canon Pixma on the network, but when I replaced it with the Epson nothing seems to work. I go to add a printer to the queue and only the FAX function of the printer shows up - not the WS-4530 print function. Does anyone out there have any suggestions? Please??? :-)
Hi Kelly,
As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
OS X Yosemite: Printing troubleshooting
Start with the section titled Check the network.
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
Please help!! I have a Macbook Pro, running Yosemite. Lightroom 5.7
Whenever I try to add music to a slideshow, it shuts down the program.Try resetting your SMC and NVRAM before attempting to install again.
Resetting the NVRAM/PRAM
Note: This will not delete any data.
The NVRAM/PRAM stores information such as speaker volume, screen resolution, startup disk selection, and recent kernel panic information (if any). You should reset the NVRAM/PRAM if you experience issues relating to these functions.
Shut down the computer by going to Apple () > Shut Down…
Select Shut Down or allow the computer to shut down automatically.
Turn on the computer by pressing the Power Button.
On the built-in keyboard, press and hold the Command (⌘), Option (⌥), P, and R keys before the gray screen appears.
Continue to hold down the keys until the computer restarts and you hear the startup chime for the second time.
Release the keys on the built-in keyboard.
Resetting the SMC of an Intel-based portable Mac with a battery you should not remove on your own
Note: This will not delete any data.
The SMC is responsible for controlling various system functions. None of your data will be deleted by resetting the SMC.
Shut down the computer by going to Apple () > Shut Down…
Select Shut Down or allow the computer to shut down automatically.
Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
On the built-in keyboard, press the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
Release the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
I hope I helped.
Austin -
Have a MacBook Pro running 10.5.8 Leopard. Can I just download 10.6.8 Snow Leopard so I can wifi sync with iPhone and iPad?
To expand on Niels post...
First you need to check that your current Mac meets the System Requirements for Snow Leopard...
Snow Leopard Specs:
http://support.apple.com/kb/SP575
If it does... then you need to Purchase and Install the Snow Leopard Disc,
Mac OS X 10.6 Snow Leopard
( It should be noted that Apple will send paid MobileMe members the Mac OS X 10.6 DVD for free.) -
i have a macbook pro running lion and cannot log on to my microsoft exchange server. Not a problem with my iphone and ipad are there any issues or fixes for this?
I found the following suggested fix, posted by a user on Barnes & Noble's site:
1. Create a folder in your Applications folder, call it: NOOKforMac
Once you've done this, copy the Nook app to this folder. This should allow the app to run on the 1st or possibly second attempt to launch it.
2. Once you're done using the app always quit it by clicking on the X (red in some cases) button of the application window (upper left hand corner)
This seems to have resolved the issue and my guess is that somehow the .dmg volume path is somewhere hard coded in the app configuration.
Elsewhere in that thread, the administrator advises calling Customer Service Team at 1-800-THE-BOOK (1-800-843-2665) and choose option 2 for Digital Support.
Good luck. -
Have a macbook pro running osx lion. Connected a Kindle Fire using micro usb and the disk icon doesn't show up on the desktop. Also sometimes get a message sayiing computer doesn't recognize device. When I opened disk utilities the Kindle disk does show up there. What am I missing?
cashworth wrote:
Kindle is connected directly, not thru a hub. Also called Amazon Kindle support, tech was baffled when I told her I was using a Mac. She said, "I'm not really familiar with apple products."
Precisely why it's not an iPad, and why it doesn't cost very much. An Apple rep would tell you how to connect an iPad to every computer.
Go here: http://www.amazon.com/gp/help/customer/display.html/ref=sv_kinh_9?ie=UTF8&nodeId =200127470
Maybe you are looking for
-
Can not get my ipad air 2 to reset or reboot
I have an ipad air 2 that I believe is running IOS 8.1. I jailbroke it using Pangu. After not finding much need for a jailbroken devise I went to reset the ipad to factory settings. I backed up the devise to my macbook and followed the reset procedur
-
Looking for a certain iPhone case
I have seen a case in pictures in either MacWorld or MacLife that I would like to buy but I can't find advertised anywhere. It is very similar to the iSee, which is a hard, see through, clear plastic shell case. This other case has a pull out easel o
-
Random roll over with CO Pulse Ticks
I'm using the 6036E with a random signal (linear encoder) to measure ticks and trigger analog samples. I have it setup to count 2 rising/falling edges and have the analog input trigger off of the counter's output. The counter is setup for the count
-
Unable to update blackberry id account information while offline
I have BB 9900. I have registered for a Blackberry ID. I have registered on Blackberry World. I can download apps to my phone when my phone is connected to the computer. When I try to enter by Blackberry ID on my phone I get the message : Unable to u
-
I need a information about O.S.6.0
Is the new BlackBerry Handheld Software v6.0.0.1478 (Multilangauge) have portuguese language????